Jeep Renegade Latitude Tire Size Calculator
- Speedometer at 60 mph
- mph
- Result
- Revs per mile
- rev/mile
- Result
- Stock tire width (mm)
- 215 mm
- You entered
This calculator works out the correct replacement tire size for a Jeep Renegade Latitude by comparing the original tire diameter, circumference, and speedometer error against a new size you enter. You input the stock tire width, aspect ratio, and wheel diameter (found on the driver’s door jamb sticker), then the new tire’s three numbers, and you get the percentage difference plus the speedometer reading at 60 mph. The goal is to keep the overall diameter within 1-2% of stock so the ABS, traction control, and transmission shift points stay accurate.
Formula
The tire diameter is calculated as: Diameter (inches) = (Width × Aspect Ratio / 100) / 25.4 × 2 + Rim Diameter. The width is in millimeters, the aspect ratio is a percentage (e.g., 60 means the sidewall height is 60% of the width), and the rim diameter is in inches. The factor 25.4 converts millimeters to inches.
The percentage difference between new and old diameter is: Difference (%) = (New Diameter − Old Diameter) / Old Diameter × 100. A positive result means the new tire is taller, a negative means shorter.
The speedometer error is based on the ratio of old to new diameter: Actual speed = Speedometer reading × (Old Diameter / New Diameter). If the new tire is larger, the speedometer reads lower than actual speed.
Worked Example
Using the default values: stock tire 215/60R17, new tire 225/65R17.
Step 1 – Stock sidewall height: 215 × 60 / 100 = 129 mm. Convert to inches: 129 / 25.4 = 5.08 in.
Step 2 – Stock diameter: 5.08 × 2 + 17 = 27.16 in.
Step 3 – New sidewall height: 225 × 65 / 100 = 146.25 mm. Convert: 146.25 / 25.4 = 5.76 in.
Step 4 – New diameter: 5.76 × 2 + 17 = 28.52 in.
Step 5 – Difference: (28.52 − 27.16) / 27.16 × 100 = 5.01%.
Step 6 – Speedometer at 60 mph: 60 × 27.16 / 28.52 = 57.1 mph. The speedometer reads 57.1 mph when you are actually going 60 mph.
Why Tire Size Matters on the Renegade Latitude
The Jeep Renegade Latitude commonly comes with 215/60R17 tires, but some trims have 16-inch or 18-inch wheels. Changing tire size affects more than looks – the vehicle’s electronic stability control, ABS, and transmission shift points rely on wheel speed sensors. A tire more than 3% larger or smaller can trigger warning lights or cause the transmission to shift at the wrong times. The Renegade’s 2.4L Tigershark engine and 9-speed automatic are particularly sensitive to diameter changes because the transmission uses tire speed to determine gear selection.
How to Read the Results
You should aim for a difference between −1% and +1% for a direct replacement. A difference of 1-2% is acceptable for most driving, but you may notice a slight speedometer error. Beyond 3% is risky – the ABS may malfunction, the traction control may engage unexpectedly, and the odometer will be inaccurate. The speedometer output tells you what the speedometer will show when you are actually traveling at 60 mph. For example, a 5% larger tire makes the speedometer read about 57 mph at true 60 mph – that is a significant error.
Common Mistakes and Misconceptions
- Confusing aspect ratio with sidewall height: The aspect ratio is a percentage of the width, not a fixed height. A 225/65 has a taller sidewall than a 215/65 even though the ratio is the same.
- Ignoring rim width: A tire that is too wide for the stock rim may rub or not seat properly. The Renegade’s 17-inch rims are typically 6.5-7 inches wide; a 235mm tire is near the limit.
- Forgetting the spare: If you use a different size spare, the AWD system can be damaged. The Renegade’s all-wheel-drive system requires all four tires to be within 1/4 inch of each other in diameter.
- Assuming the door sticker is the only option: The sticker lists the original equipment size, but you can go slightly larger for off-road clearance as long as you stay within 2%.
How to Choose a New Size
Start with the stock size from the driver’s door jamb. Decide what you want – more ground clearance, better off-road traction, or a smoother ride. For a Renegade Latitude, common upgrades are 225/65R17 (about 5% larger, which is too big for stock without a lift) or 215/65R17 (about 3% larger, still risky). A safer choice is 225/60R17, which is only 1.4% larger. If you want to keep the speedometer accurate, stay within 1% – for example, 215/60R17 to 225/55R17 is only 0.4% smaller.
Also consider the load index and speed rating. The Renegade requires a tire with at least a 98 load index (about 1,653 lbs per tire) and an H or V speed rating. Off-road tires often have a lower speed rating, which is fine if you don’t drive above 100 mph.
Safety and Legal Considerations
Changing tire size can affect your vehicle’s braking distance, especially on wet roads. A larger, heavier tire increases unsprung weight, which can reduce fuel economy and stress the suspension. Also, some jurisdictions require that the tire size matches the manufacturer’s placard for roadworthiness inspections. If you go more than 3% larger, you may need a lift kit to prevent rubbing on the fender liners, especially when turning or going over bumps. Always test for clearance by turning the steering wheel fully in both directions and checking the suspension at full compression.
Frequently Asked Questions
What is the stock tire size on a Jeep Renegade Latitude?
The most common stock size is 215/60R17, but some Latitude models came with 215/65R16 or 225/55R18 depending on the optional wheel package. Check the driver’s door jamb sticker for the exact size for your VIN.
Can I put 225/65R17 on a stock Renegade Latitude?
Technically yes, but it is not recommended. That size is about 5% larger, which will cause a speedometer error of about 3 mph at 60 mph, may trigger ABS lights, and can rub on the fender liner when turning. You would need a 1-2 inch lift to run it safely.
Will a larger tire affect my fuel economy?
Yes. Larger and heavier tires increase rolling resistance and aerodynamic drag, typically reducing fuel economy by 1-3 mpg. The engine also has to work harder to turn the larger diameter, especially on hills.
How do I find the tire size on my Renegade?
Look on the sidewall of the tire – it will show a series like P215/60R17. The first number is width in mm, the second is the aspect ratio (sidewall height as a percentage of width), and the third is the rim diameter in inches. The door jamb sticker on the driver’s side also lists the recommended size.
Is a 1% tire size difference acceptable?
Yes, a 1% difference is generally safe and will not cause noticeable speedometer error or ABS issues. Many drivers switch from 215/60R17 to 225/60R17 (1.4% larger) without problems, but you should still check for clearance.
Does changing tire size void my warranty?
It can affect the drivetrain warranty if the change causes damage to the transmission or AWD system. Most dealers will not cover failures caused by non-stock tire sizes. Check your warranty terms and consider keeping the stock size if you want full coverage.
Related
Formula used
in width_old | Stock tire width (mm) | mm | 215 | 0 in ratio_old | Stock aspect ratio (%) | % | 60 | 0 in rim_old | Stock wheel diameter (in) | in | 17 | 0 in width_new | New tire width (mm) | mm | 225 | 0 in ratio_new | New aspect ratio (%) | % | 65 | 0 in rim_new | New wheel diameter (in) | in | 17 | 0 out diff | Diameter difference | % | ((width_new * ratio_new / 100 / 25.4 * 2 + rim_new) - (width_old * ratio_old / 100 / 25.4 * 2 + rim_old)) / (width_old * ratio_old / 100 / 25.4 * 2 + rim_old) * 100 | 2 out speedo | Speedometer at 60 mph | mph | 60 * (width_old * ratio_old / 100 / 25.4 * 2 + rim_old) / (width_new * ratio_new / 100 / 25.4 * 2 + rim_new) | 1 out revs | Revs per mile | rev/mile | 63360 / (3.141592653589793 * (width_new * ratio_new / 100 / 25.4 * 2 + rim_new)) | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.