JEE Hard Molarity Questions: Solved Examples
- Total moles of solute
- mol
- Result
- Total volume
- mL
- Result
- Volume of solution 1
- 100 mL
- You entered
This guide tackles the hardest molarity questions that appear in JEE Main and JEE Advanced. You’ll learn the exact formulas, the most common traps, and step-by-step solutions to problems involving dilution, mixing, neutralization, and back-titration—the types that separate top scorers.
Formula
The core formula for mixing two solutions of the same solute is:
Mf = (M1V1 + M2V2) / (V1 + V2)
Where:
- Mf = final molarity (mol/L)
- M1, M2 = molarities of the individual solutions (mol/L)
- V1, V2 = volumes of the individual solutions (L or mL, as long as both use the same unit)
This works because the total moles of solute are conserved: ntotal = M1V1 + M2V2. Dividing by the total volume gives the new concentration.
Worked Example
Using the default values from the calculator: 100 mL of 0.5 M solution is mixed with 200 mL of 1.0 M solution.
- Calculate moles in solution 1: 0.5 mol/L × 0.100 L = 0.050 mol
- Calculate moles in solution 2: 1.0 mol/L × 0.200 L = 0.200 mol
- Total moles = 0.050 + 0.200 = 0.250 mol
- Total volume = 0.100 L + 0.200 L = 0.300 L
- Final molarity = 0.250 mol / 0.300 L = 0.833 mol/L
The calculator gives 0.833 mol/L, matching perfectly.
Dilution Problems (M1V1 = M2V2)
Dilution is the most common “hard” molarity question because students forget that the volume must be in the same units on both sides. The formula is:
M1V1 = M2V2
Where M1 and V1 are the initial concentration and volume, and M2 and V2 are the final values. Example: What volume of 12 M HCl is needed to make 500 mL of 0.1 M HCl?
V1 = (0.1 M × 500 mL) / 12 M = 4.17 mL. The trap: students often use liters for one volume and milliliters for the other. Always convert to the same unit.
Mixing Different Solutes
When you mix solutions of different solutes that don’t react, the final molarity of each solute is calculated separately. For example, mixing 100 mL of 0.2 M NaCl with 200 mL of 0.3 M KCl gives:
- [NaCl] = (0.2 M × 100 mL) / 300 mL = 0.0667 M
- [KCl] = (0.3 M × 200 mL) / 300 mL = 0.200 M
- Total chloride ion concentration = 0.0667 + 0.200 = 0.2667 M
Hard JEE questions often ask for the concentration of a specific ion after mixing, so you must account for the stoichiometry of the salt (e.g., CaCl2 gives two Cl− ions per formula unit).
Neutralization and Titration
Acid-base titration problems are a favorite for JEE. The key equation is:
nacid × Macid × Vacid = nbase × Mbase × Vbase
Where n is the number of H⁺ or OH⁻ ions per formula unit. For example, 25 mL of 0.1 M H2SO4 neutralizes how many mL of 0.2 M NaOH?
H2SO4 gives 2 H⁺, so: (2)(0.1 M)(25 mL) = (1)(0.2 M)(VNaOH) → VNaOH = 25 mL. The trap: forgetting to multiply by 2 for diprotic acids.
Back-Titration and Harder Stoichiometry
Back-titration is a classic JEE Advanced question. In these problems, you add excess reagent, then titrate the leftover. For example: 1.0 g of a mixture of Na2CO3 and NaHCO3 is treated with 50 mL of 0.5 M HCl. The excess HCl requires 10 mL of 0.2 M NaOH for neutralization. Find the percentage of Na2CO3 in the mixture.
Steps:
- Total HCl added = 0.5 M × 0.050 L = 0.025 mol
- Excess HCl = 0.2 M × 0.010 L = 0.002 mol (from NaOH titration)
- HCl reacted with mixture = 0.025 − 0.002 = 0.023 mol
- Let x = mol Na2CO3, y = mol NaHCO3. Reactions: Na2CO3 + 2HCl → 2NaCl + H2O + CO2; NaHCO3 + HCl → NaCl + H2O + CO2
- So 2x + y = 0.023 mol. Also 106x + 84y = 1.0 g (molar masses). Solve to get x = 0.005 mol, y = 0.013 mol.
- Mass of Na2CO3 = 0.005 × 106 = 0.53 g → 53%
This problem combines molarity with stoichiometry and a system of equations—exactly what JEE loves.
Common Mistakes and How to Avoid Them
- Unit mismatch: Always use liters for molarity calculations, or keep mL consistently. Mixing L and mL is the #1 error.
- Forgetting stoichiometric coefficients: In neutralization, multiply molarity by the number of H⁺ or OH⁻ ions. For salts, multiply by the number of ions.
- Assuming volumes are additive: In ideal solutions, volumes add, but in real solutions, they may not. JEE usually assumes additivity, but be aware of the assumption.
- Rounding too early: Keep intermediate values to at least 4 significant figures. Round only at the final answer.
- Confusing molarity with molality: Molarity is moles per liter of solution; molality is moles per kilogram of solvent. They are equal only when density is 1 g/mL.
Limits of the Formula
The mixing formula assumes no chemical reaction between solutes and that volumes are strictly additive. In reality, mixing 50 mL water with 50 mL ethanol gives less than 100 mL due to contraction. For ionic solutions, the volume change is usually small but can matter at high concentrations. For precise work, use mass-based concentrations or account for density changes.
Also, the formula works only for the same solute. If you mix different solutes that react, you must first determine the limiting reagent and then calculate the concentrations of all species after reaction.
Frequently Asked Questions
How do I solve molarity questions with density given?
When density is given, you can convert between molarity and molality or mass percent. Use the formula: M = (10 × density × mass%) / molar mass. For example, 98% H2SO4 with density 1.84 g/mL has molarity = (10 × 1.84 × 98) / 98 = 18.4 M. This is a common JEE question.
What is the difference between molarity and normality?
Normality is molarity multiplied by the number of H⁺ (for acids) or OH⁻ (for bases) ions. For H2SO4, 1 M = 2 N. In redox reactions, it’s the number of electrons transferred. JEE often asks you to convert between them.
How do I handle molarity questions with back-titration?
First, calculate the total moles of the reagent added. Then, calculate the moles of the reagent left over from the back-titration. Subtract to get moles that reacted. Finally, use stoichiometry to find the amount of the analyte. Always write balanced equations first.
Can I use M1V1 = M2V2 for dilution of a solution with a different solute?
No, that formula only works when you are diluting a single solute with solvent, not mixing different solutes. For mixing different solutes, calculate each final concentration separately using n/V_total.
What if the volumes are not additive?
In JEE problems, volumes are usually assumed additive unless stated otherwise. If not additive, you need the final volume from density or direct measurement. The formula becomes Mf = (n1+n2)/Vfinal, where Vfinal is given or calculated from total mass and density.
How do I solve molarity questions involving hydration of salts?
When a hydrated salt like CuSO4·5H2O is dissolved, the water of hydration becomes part of the solvent. The molar mass of the hydrated salt includes the water, so use the hydrated molar mass to calculate moles. The final concentration of CuSO4 is based on the anhydrous moles, which equal the hydrated moles.
Related
Formula used
in v1 | Volume of solution 1 | mL | 100 | 0 in m1 | Molarity of solution 1 | mol/L | 0.5 | 0 in v2 | Volume of solution 2 | mL | 200 | 0 in m2 | Molarity of solution 2 | mol/L | 1.0 | 0 out mf | Final molarity | mol/L | (m1*v1 + m2*v2) / (v1 + v2) | 3 out n_total | Total moles of solute | mol | (m1*v1/1000) + (m2*v2/1000) | 4 out v_total | Total volume | mL | v1 + v2 | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.