ThisCalculator

Everyday

HDMI vs DisplayPort: Which Cable Should You Use?

Updated · Standard formula, shown below

If you’ve stopped guessing between HDMI and DisplayPort, the short answer is: use DisplayPort for PC gaming and high refresh rate monitors, and use HDMI for TVs, consoles, and general home entertainment. Both carry digital video and audio, but they differ in bandwidth, features, and the devices they’re designed for. This guide explains what each connector does, how they compare, and how to choose the right one for your setup.

Background: Where Each Connector Came From

HDMI (High-Definition Multimedia Interface) was introduced in 2002 by a consortium of consumer electronics companies. It was designed to replace analog connectors like SCART and component video, and to carry both video and audio over a single cable. It quickly became the standard for TVs, Blu-ray players, game consoles, and streaming devices.

DisplayPort was developed by VESA (Video Electronics Standards Association) and released in 2006. It was created with computers in mind, offering higher bandwidth and the ability to daisy-chain multiple monitors. It’s now the default video output on most desktop graphics cards and many laptops, though many laptops also include HDMI.

How They Work: Bandwidth and Data Transfer

Both HDMI and DisplayPort transmit digital video and audio data in packets. The key difference is the amount of data they can carry (bandwidth) and the way they handle that data.

  • HDMI 2.1 supports up to 48 Gbps, enough for 8K at 60Hz or 4K at 120Hz with HDR.
  • DisplayPort 2.1 supports up to 80 Gbps, which can handle 8K at 120Hz or 4K at 240Hz.
  • Older versions: HDMI 2.0 (18 Gbps) and DisplayPort 1.4 (32.4 Gbps) are still common.

Higher bandwidth means you can push more pixels and higher refresh rates. This is why DisplayPort is often preferred for high-end gaming monitors that run at 144Hz or 240Hz at 1440p or 4K.

Key Differences: What Each Connector Excels At

While both can carry video and audio, there are practical differences that matter depending on your devices.

  • Refresh rate support: DisplayPort typically supports higher refresh rates at higher resolutions. For example, a 1440p monitor at 165Hz usually works over DisplayPort, but HDMI 2.0 might be limited to 144Hz.
  • Variable refresh rate (VRR): Both support VRR (like FreeSync and G-Sync), but DisplayPort has been more consistent on PC monitors. HDMI 2.1 also supports VRR, which is why it’s used on Xbox Series X and PS5.
  • Audio return channel: HDMI has ARC/eARC, which lets audio go from the TV back to a soundbar or receiver. DisplayPort doesn’t have this; it’s not designed for home theater setups.
  • Multi-monitor support: DisplayPort supports daisy-chaining via MST (Multi-Stream Transport), so you can run multiple monitors from one port. HDMI doesn’t support daisy-chaining.
  • Connector size: HDMI has a standard size, a mini version, and a micro version. DisplayPort has a standard size and a smaller Mini DisplayPort (used on some laptops).

How to Choose: Which One Should You Use?

The choice depends on what you’re connecting. Here’s a quick guide:

  • PC to monitor: Use DisplayPort if your monitor and GPU both have it. It gives you the best chance of hitting the monitor’s max refresh rate and supports adaptive sync.
  • PC to TV: Use HDMI. Most TVs don’t have DisplayPort inputs, and HDMI supports the audio and CEC features you need for a living room setup.
  • Game console to TV: Use HDMI. Consoles only have HDMI outputs. HDMI 2.1 is required for 4K 120Hz on PS5 and Xbox Series X.
  • Laptop to monitor: Check what ports your laptop has. Many have both, but if you need 4K at 120Hz, you’ll likely need DisplayPort (or HDMI 2.1).

If you’re not sure which version of HDMI or DisplayPort your devices support, check the specs in the manual or on the manufacturer’s website. The cable also matters: a cheap HDMI cable might not support HDMI 2.1 features, even if your devices do.

Common Problems and Misconceptions

  • “HDMI is better for gaming because consoles use it.” That’s true for consoles, but for PC gaming, DisplayPort is often better because it supports higher refresh rates and more flexible VRR.
  • “DisplayPort can’t carry audio.” It can. DisplayPort carries audio just like HDMI, though it doesn’t have ARC/eARC.
  • “I need a special cable for 4K 120Hz.” You need a cable that supports the required bandwidth. For HDMI 2.1, look for “Ultra High Speed” certified cables. For DisplayPort, use a cable that’s rated for the version you need (e.g., DisplayPort 1.4 or 2.1).
  • “All HDMI cables are the same.” Not true. Older cables might not support HDMI 2.1 features like 4K 120Hz or eARC. But for most uses, a standard cable works fine.

Cost and Availability

Both cable types are inexpensive for standard lengths (6 feet or less). A basic HDMI cable costs $5–$10; a certified Ultra High Speed HDMI cable might cost $15–$20. DisplayPort cables are similar, with high-quality ones around $10–$15. Longer cables (25 feet or more) are more expensive and may require signal boosters, especially for high bandwidth.

Alternatives: What Else Is Out There?

Besides HDMI and DisplayPort, you might encounter:

  • USB-C with DisplayPort Alt Mode: Many laptops use USB-C to output video. This is essentially DisplayPort signals over a USB-C connector. You can use a USB-C to DisplayPort cable or adapter.
  • Thunderbolt: Thunderbolt 3/4 uses USB-C and supports DisplayPort, but it also carries data and power. It’s common on Macs and some Windows laptops.
  • DVI and VGA: Older connectors, mostly obsolete. DVI can carry video only (no audio), and VGA is analog. You’ll rarely need these unless you have old equipment.
  • Wireless: Miracast and AirPlay can stream video, but they’re not reliable for gaming or high refresh rates.

Frequently Asked Questions

Can I use an HDMI to DisplayPort adapter?

Yes, but it’s not always straightforward. HDMI to DisplayPort adapters need to convert the signal, which can be expensive and may not support all features like high refresh rates. DisplayPort to HDMI adapters are simpler and cheaper because DisplayPort can output HDMI signals natively.

Does DisplayPort support 4K 120Hz?

Yes, DisplayPort 1.4 supports 4K at 120Hz with compression (DSC), and DisplayPort 2.0/2.1 supports it without compression. HDMI 2.1 also supports 4K 120Hz natively. Check your monitor and GPU specs to see which version they support.

Which cable is best for a 144Hz monitor?

For a 144Hz monitor, use DisplayPort if available. HDMI 2.0 can do 144Hz at 1080p, but for 1440p or 4K, you’ll need HDMI 2.1 or DisplayPort 1.4 with DSC. Always check your monitor’s manual for the recommended cable.

Is HDMI 2.1 the same as DisplayPort 1.4?

No. HDMI 2.1 has a higher bandwidth (48 Gbps) than DisplayPort 1.4 (32.4 Gbps), but DisplayPort 2.1 is higher (80 Gbps). In practice, both can handle 4K 120Hz, but DisplayPort 2.1 can do higher resolutions and refresh rates.

Can I use DisplayPort for a TV?

Most TVs don’t have DisplayPort inputs, so you’d need an adapter. But it’s usually better to use HDMI for TVs because it supports ARC, CEC, and other TV-specific features.

Do I need a special cable for 8K?

Yes. For 8K at 60Hz, you need HDMI 2.1 (48 Gbps) or DisplayPort 1.4 with DSC. Make sure the cable is certified for that bandwidth. For 8K at 120Hz, you’ll need DisplayPort 2.1 or HDMI 2.1 with DSC.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.