DLSS Settings Tuning Guide for Quality & FPS
This guide walks you through tuning NVIDIA DLSS (Deep Learning Super Sampling) to balance image quality, latency, and frame rate. You’ll learn how each DLSS mode affects these three factors, how to choose the right one for your hardware and game, and what to do when things look soft or run slowly. No special tools are required—just your game’s graphics menu and a few minutes of testing.
What You’ll Need
- A PC with an NVIDIA RTX graphics card (20-series or newer) that supports DLSS.
- A game that includes DLSS in its graphics settings (most modern AAA titles).
- The latest NVIDIA Game Ready driver installed.
- Optional: a frame rate counter (like the one built into GeForce Experience or your monitor’s OSD) to measure performance.
Step-by-Step
- Open the game’s graphics settings. Look for a section labeled “DLSS,” “Image Scaling,” or “Upscaling.” In most games, it’s under Display or Graphics Settings.
- Enable DLSS. Turn it on. If there’s a separate toggle for “DLSS Frame Generation” or “DLSS 3,” leave it off for now—you’ll decide later.
- Choose a DLSS mode. The options are usually: Quality, Balanced, Performance, and Ultra Performance (sometimes called Super Performance). Start with Quality—it renders at a higher internal resolution (often 67% of your native resolution) and gives the best image clarity.
- Test Quality mode. Play a few minutes of actual gameplay, not just a menu. Look at fine details like foliage, text, and distant objects. Check your frame rate using the counter. Write down the average FPS.
- Switch to Balanced mode. This renders at a lower internal resolution (around 58% of native). Compare the image quality and frame rate. The difference in sharpness may be subtle, but the FPS gain can be noticeable.
- Try Performance mode. This renders at about 50% of native resolution. You’ll see a clearer FPS boost, but image quality will be softer, especially on 1440p or 4K displays. Check if the loss in detail is acceptable for the speed gain.
- Consider Ultra Performance. Only use this on 4K or ultra-wide monitors. At 1080p, it looks blurry. It’s meant for extreme FPS gains when you’re GPU-bound.
- Decide on Frame Generation. If your game supports DLSS 3 (RTX 40-series), enabling it can double or triple frame rates. However, it adds a small amount of latency. If you’re playing a fast-paced shooter, you may prefer to keep it off. For single-player games, it’s usually a great boost.
- Adjust sharpening. Some games have a DLSS sharpening slider (often 0–1). A value around 0.2–0.4 can restore some perceived detail without causing harsh halos. Start at 0.3 and adjust to taste.
- Set a frame rate limit. If your monitor is 144Hz, cap the FPS at 141 (or 3 below your refresh rate) to reduce latency and avoid tearing. This also prevents the GPU from running at 100% when it doesn’t need to.
- Test in a variety of scenes. Run through a bright outdoor area, a dark interior, and a fast-action sequence. DLSS can behave differently in each. Make sure the mode you pick looks good everywhere.
- Save your settings. Once you’re happy, exit the menu. The game will remember your choice.
Common Mistakes
- Using Performance mode at 1080p. The internal resolution becomes so low that the image looks blurry and shimmering. Stick to Quality or Balanced at 1080p.
- Ignoring latency. Frame Generation boosts FPS but adds input lag. In competitive shooters, you might prefer native rendering or DLSS without frame gen.
- Forgetting to update drivers. Old drivers can cause DLSS to crash or look worse. Always use the latest Game Ready driver.
- Mixing DLSS with other upscaling. Some games have both DLSS and FSR (AMD’s upscaler). Turning both on at the same time can cause visual artifacts. Use only one.
- Not testing during actual gameplay. Menus look sharp even at low settings. DLSS artifacts show up in motion, so you must test in real gameplay.
Tips
- Match DLSS mode to your resolution: At 4K, Performance mode is often acceptable. At 1440p, Balanced is a good middle ground. At 1080p, Quality is usually the only good option.
- Use DLSS to increase graphics settings. The FPS you save from DLSS can be reinvested into higher textures, shadows, or ray tracing. For example, enable DLSS Quality and turn on ray tracing—you might get the same FPS as native without RT, but with better visuals.
- Check if your game has a DLSS preset override. Some games let you choose “DLSS 2” vs “DLSS 3” separately. If you have an RTX 40-series card, DLSS 3 includes frame generation; DLSS 2 is just upscaling.
- Use NVIDIA’s built-in FPS overlay. Press Alt+Z in GeForce Experience to see the performance overlay. It shows FPS and latency, which helps you compare modes objectively.
- Consider your CPU. If your CPU is the bottleneck, DLSS won’t help much. Check CPU usage while playing—if it’s near 90-100%, you need a better CPU, not a lower DLSS mode.
Troubleshooting
- DLSS option is grayed out. This usually means your GPU doesn’t support it (check if you have an RTX card) or the game hasn’t detected it. Update your drivers and restart the game. If it persists, verify the game files.
- Image looks blurry or shimmering. Try a higher DLSS mode (e.g., from Performance to Balanced). Also, increase the sharpening slider slightly. If it’s still bad, disable DLSS and use native resolution.
- Frame rate is lower than expected. Make sure DLSS is actually enabled (some games have a separate “Upscaling” toggle). Also, check that your resolution is set to native—if you’re already at a low resolution, DLSS has less room to help.
- Game crashes when enabling DLSS. Update your drivers. If it still crashes, try a different DLSS mode. If the problem persists, the game may have a bug—check for patches or disable DLSS.
- Latency feels high. Turn off Frame Generation. Also, enable NVIDIA Reflex (if available) to reduce input lag. Reflex works well with DLSS.
- DLSS doesn’t appear in the menu. Some games require you to restart after enabling DLSS in the settings. Also, make sure you’re not in windowed mode—DLSS often requires fullscreen or borderless windowed.
Frequently Asked Questions
Does DLSS reduce latency?
DLSS upscaling (without frame generation) can slightly reduce latency because the GPU has less work to do, so frames are produced faster. However, frame generation adds latency, though NVIDIA Reflex can mitigate it.
What’s the difference between DLSS Quality and Performance?
Quality mode renders at a higher internal resolution (around 67% of native), giving better image quality. Performance mode renders at a lower resolution (around 50%), giving more FPS but softer visuals.
Is DLSS worth it?
Yes, for most games. It gives a significant FPS boost with minimal visual loss, especially at 1440p and 4K. At 1080p, the improvement is less noticeable, but still helpful if you’re GPU-bound.
Can I use DLSS on an RTX 2060?
Yes, DLSS works on all RTX cards, including the 20-series. However, DLSS 3 (frame generation) is exclusive to RTX 40-series. On a 2060, you can use DLSS 2 upscaling.
Should I use DLSS with ray tracing?
Yes, DLSS is often the best way to enable ray tracing without killing your frame rate. The upscaling compensates for the performance hit from ray tracing, so you get better visuals and playable FPS.
Why does DLSS look blurry in some games?
This can happen if the game’s implementation is poor, or if you’re using a low-quality mode at a low resolution. Try a higher quality mode, adjust sharpening, or update the game—developers often improve DLSS over time.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.