How to Summon AR Ghosts with a Google Search
This guide shows you how to bring augmented reality (AR) ghosts into your real-world surroundings using only your smartphone and a Google search. You’ll learn the exact search terms and steps to see a 3D ghost appear in your room, plus tips for getting the best results and troubleshooting common issues.
What You’ll Need
- A smartphone or tablet with the Google app or Chrome browser (iOS or Android).
- An internet connection (Wi-Fi or cellular).
- ARCore (Android) or ARKit (iOS) support – most phones from 2018 onward have this. If unsure, check your device specs.
- Camera access enabled for the Google app or Chrome.
- Enough free space around you to place the ghost (a clear floor or table).
Step-by-Step
- Open Google Search. Launch the Google app on your phone, or open Chrome and go to google.com. Make sure you’re signed in to your Google account (not required, but helps with consistency).
- Search for the ghost. In the search bar, type one of the following exact phrases:
– “Google AR ghost”
– “3D ghost AR”
– “Google 3D animals ghost” (sometimes works)
The most reliable is “Google AR ghost”. Press Enter. - Look for the 3D result. Scroll through the search results. You should see a box or card labeled “View in 3D” or “View in your space” – usually with a small ghost icon. It may appear near the top of the results or in a dedicated “3D models” section.
- Tap “View in 3D”. This opens an interactive 3D model on your screen. You can rotate it with your finger to preview it.
- Tap “View in your space” (or “AR”). This button appears below the 3D model. If you don’t see it, tap the AR icon (a small cube with arrows). The app will ask for camera permission – tap Allow.
- Scan your environment. Move your phone slowly around the room. The app will detect flat surfaces (floor, table, wall). A grid or dots may appear on the detected surface.
- Place the ghost. Once a surface is detected, tap on it to place the ghost. It will appear as a 3D animated figure in your real space.
- Interact and capture. Walk around the ghost to see it from all angles. Use the on-screen shutter button to take a photo or video. You can also move the ghost by dragging it with your finger (if supported).
- Exit AR. Tap the X or “Done” button to close the AR view. The ghost disappears.
Common Mistakes
- Using the wrong search term. Searching “ghost” alone often brings up text results, not the 3D model. Stick to “Google AR ghost” or “3D ghost AR”.
- Not having camera permission. If you denied camera access earlier, the AR feature won’t work. Go to your phone’s settings and enable camera access for Google/Chrome.
- Placing on a non-flat surface. The ghost needs a flat surface. Trying to place it on a carpet with patterns or a dark surface may fail.
- Moving the phone too fast. During scanning, slow, steady movements work best. Fast movements confuse the AR tracking.
- Expecting it on a desktop. AR only works on mobile devices with a camera. It won’t appear on a laptop or desktop.
Tips
- Use good lighting. Bright, even lighting helps the camera detect surfaces. Avoid direct sunlight or very dark rooms.
- Clear the area. Remove clutter from the floor or table where you want to place the ghost – it makes detection easier.
- Try different search variations. If one term doesn’t work, try “Google 3D ghost” or “AR ghost model”. Sometimes the feature is rolled out gradually.
- Update your apps. Ensure the Google app and Chrome are up to date. Older versions may lack the AR feature.
- Check device compatibility. If you have an older phone, AR may not be supported. Search “ARCore supported devices” to confirm.
- Use a tripod or stable hand. For a clear photo, hold your phone steady or use a small tripod.
Troubleshooting
No “View in 3D” button appears. Try a different search phrase. If still nothing, your device may not support AR, or the feature isn’t available in your region. You can also try searching from the Google app instead of Chrome.
AR view crashes or freezes. Close the app, restart your phone, and try again. Also, make sure you have enough free storage space – low storage can cause crashes.
Ghost appears but is invisible or flickering. This is usually a tracking issue. Move to a better-lit area, and slowly pan your camera. If it persists, restart the AR session.
Can’t place the ghost on the floor. The app may be detecting a different surface. Try tapping a different area, or move to a room with less visual clutter.
Ghost is too small or too large. You can usually pinch to resize the ghost after placing it. If not, try moving closer or farther from the placement point.
No camera permission prompt. Go to your phone’s settings, find the Google app or Chrome, and manually enable camera access.
Frequently Asked Questions
Is this a real ghost? No, it’s a computer-generated 3D model rendered in augmented reality. It’s not supernatural.
Does this work on iPhone? Yes, as long as the iPhone supports ARKit (iPhone 6s and later). The process is the same.
Can I record a video of the ghost? Yes, the AR view has a video recording button (usually a red circle). You can also use your phone’s screen recorder.
Why can’t I find the ghost on my Android? Your phone may not be ARCore certified. Check Google’s list of supported devices, or try updating the Google Play Services for AR.
Do I need to install an app? No, the AR feature is built into Google Search. You don’t need a separate app.
Can I share the ghost with friends? Yes, you can share the photo or video you capture. However, the ghost only appears on your screen, not on your friends’ phones unless they do the same search.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.