ThisCalculator

Everyday

How to Secure an Access Control System

Updated · Standard formula, shown below

This guide walks you through the practical steps to harden an electronic access control system (like card readers, keypads, or mobile credential systems) against modern cyber threats. You’ll learn how to assess your current setup, patch vulnerabilities, enforce strong authentication, and monitor for attacks. By the end, you’ll have a clear action plan to significantly reduce the risk of unauthorized access and data breaches.

What You’ll Need

  • Administrative access to the access control system’s software (web portal or local client).
  • Physical or remote access to the controllers, readers, and network switches that connect them.
  • Credentials for the system’s database (if you plan to update or audit it).
  • A list of all current users, their roles, and their access levels.
  • Network documentation showing how the access control system is segmented from the rest of the network.
  • A vulnerability scanner (optional but recommended) to identify open ports and outdated firmware.

Step-by-Step

  1. Inventory every component. Create a complete list of all hardware and software: controllers, readers, power supplies, network interfaces, server software, and mobile apps. Note the firmware version of each controller and the software version of the central management platform. Keep this inventory updated.
  2. Segment the network. Place the access control system on its own VLAN (Virtual Local Area Network) or physically separate network. Use firewalls to restrict traffic between this network and the corporate LAN. Only allow necessary protocols (e.g., OSDP, Wiegand, or proprietary) to specific IP addresses. This limits the blast radius if a device is compromised.
  3. Change default credentials immediately. Every controller, reader, server, and database often ships with default usernames and passwords. Change them all to strong, unique passwords. Use a password manager to store them. Never reuse passwords across devices.
  4. Enable encryption for all communication. Use OSDP (Open Supervised Device Protocol) with Secure Channel instead of the older, unencrypted Wiegand protocol where possible. For IP-based readers, use TLS 1.2 or higher. Ensure the central server communicates with controllers over encrypted channels (e.g., HTTPS, SSH).
  5. Update firmware and software regularly. Check the manufacturer’s website for updates at least quarterly. Apply security patches as soon as they are released. Set a reminder to check monthly, as many manufacturers release critical patches without public announcements.
  6. Implement multi-factor authentication (MFA) for administrative access. Require a password plus a second factor (like a one-time code from an app or a hardware token) for anyone logging into the access control management software. This prevents credential theft from being enough to compromise the system.
  7. Use strong authentication for cardholders. Move away from simple proximity cards that can be cloned. Use smart cards with cryptographic authentication (e.g., MIFARE DESFire) or mobile credentials with secure elements. If you must keep legacy cards, at least enable card + PIN where possible.
  8. Restrict physical access to controllers and panels. Place controllers in locked enclosures with tamper switches that trigger an alarm. Ensure that only authorized personnel can physically reach the hardware. This prevents attackers from directly connecting to the controller’s debug port or swapping out a reader.
  9. Audit user accounts and access levels. Review the user list every quarter. Remove accounts for former employees immediately upon termination. Ensure that no one has more access than their job requires. Use role-based access control (RBAC) to group permissions.
  10. Monitor logs and set up alerts. Enable logging on the server and controllers. Review logs weekly for unusual activity, such as repeated failed attempts, access outside normal hours, or door forced-open alarms. Configure real-time alerts for critical events like a controller going offline or multiple failed authentications.
  11. Disable unused services and ports. Turn off any network services on the controllers that are not needed (e.g., Telnet, SNMP v1/v2). Close unused ports on the firewall. This reduces the attack surface.
  12. Develop an incident response plan. Write down what to do if a breach is suspected: who to contact, how to isolate affected devices, how to revoke credentials, and how to restore from backups. Test this plan annually.

Common Mistakes

  • Ignoring physical security. Even the best cyber defenses are useless if an attacker can physically open a controller and short-circuit a reader or connect a laptop to the network.
  • Using Wiegand protocol. Wiegand transmits card data in plaintext and is vulnerable to interception and replay. If you must use it, at least use it over a shielded cable and limit its exposure.
  • Neglecting firmware updates. Many systems are left unpatched for years, leaving known vulnerabilities open.
  • Sharing credentials. Multiple administrators sharing a single account makes it impossible to trace actions to an individual.
  • Not monitoring logs. Without active monitoring, a breach can go undetected for months.
  • Assuming the cloud provider secures everything. If you use a cloud-based access control service, you are still responsible for your own user accounts, credentials, and network configuration.

Tips

  • Use a dedicated email address for the access control system’s service account to avoid phishing attacks on personal accounts.
  • Document all changes in a change log to track who did what and when.
  • Consider using a hardware security module (HSM) for storing encryption keys if your system supports it.
  • Train all users on how to recognize phishing attempts and the importance of not sharing their badges or PINs.
  • Regularly test your system by attempting to clone a card or access a restricted area to identify weaknesses.
  • Keep a spare controller on hand to quickly replace a compromised or failed unit.

Troubleshooting

If you encounter issues during the hardening process, here’s what to do:

  • System becomes unresponsive after a firmware update. First, try rebooting the controller. If that fails, contact the manufacturer’s support. Always have a backup of the previous firmware before updating.
  • Readers stop working after switching to OSDP. Ensure that the reader and controller both support OSDP and that the wiring is correct (OSDP uses RS-485, not Wiegand’s data lines). Check the baud rate and address settings on both devices.
  • MFA setup fails for admin accounts. Verify that the MFA server (e.g., RADIUS or TACACS+) is reachable from the access control server. Check that the time is synchronized on all devices (use NTP).
  • Cannot access the management software after changing firewall rules. Temporarily enable the rule to allow your IP address, then test. If it works, re-tighten the rule to only allow specific IPs.
  • Card readers are not reading smart cards. Check that the reader is configured for the correct card type and that the card’s encryption keys match the reader’s. Test with a known-good card.
  • Logs are not showing events. Check that logging is enabled in the software and that the server’s clock is correct. Also verify that the log storage location has enough disk space.

Frequently Asked Questions

What is the difference between Wiegand and OSDP?

Wiegand is an old, unencrypted wiring standard that sends card data as electrical pulses. OSDP is a modern, encrypted communication protocol that also supervises the connection, making it far more secure and reliable.

Do I need to replace all my existing readers to improve security?

Not necessarily. If your controllers support OSDP, you may only need to replace the readers. If your controllers are very old, you might need to upgrade them as well. A cost-benefit analysis is recommended.

How often should I update firmware?

At least quarterly, but ideally monthly. Subscribe to the manufacturer’s security advisories to stay informed about critical patches.

Can I secure an access control system that is on the same network as other devices?

Yes, but it’s not ideal. You should create a separate VLAN and use firewalls to restrict traffic. If that’s not possible, at least ensure that all devices are patched and use strong encryption.

What is the most common vulnerability in access control systems?

Default credentials and unpatched firmware are the most common. Many systems are left with default passwords, making them easy to compromise.

Is mobile credential more secure than a physical card?

Generally, yes, because mobile credentials use strong encryption and can be revoked remotely. However, they rely on the phone’s security, so users must keep their phones locked and updated.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.