Root ZTE V967S: Step-by-Step Guide

Rooting your ZTE V967S gives you full administrative control over the Android system, allowing you to remove bloatware, install custom ROMs, use root-only apps, and tweak performance. This guide walks you through the safest method using a PC, covering everything from driver setup to verifying root access. Before starting, back up your data and ensure your phone has at least 70% battery.

What You’ll Need

• ZTE V967S with USB debugging enabled (Settings > Developer Options > USB Debugging)
• A Windows PC (XP, 7, 8, 10, or 11)
• Original USB cable that supports data transfer
• ZTE V967S USB drivers (install from official ZTE support or a trusted driver pack)
• Rooting software: Kingo Root (PC version) or SuperSU zip for manual flashing (if you have a custom recovery)
• Optional: A custom recovery like TWRP or CWM (for manual method)

Step-by-Step

1. Enable USB Debugging and Unknown Sources – Go to Settings > About Phone and tap Build Number seven times to unlock Developer Options. Then go to Settings > Developer Options and check USB Debugging. Also, in Settings > Security, enable Unknown Sources to allow installation of non-Play Store apps.
2. Install USB Drivers on PC – Download the ZTE V967S drivers and install them. After installation, connect your phone to the PC via USB. If Windows asks for a driver, point it to the installed driver folder. Verify the device appears in Device Manager under “Portable Devices� or “ADB Interface� without a yellow exclamation mark.
3. Backup Your Phone – Use a backup app like Titanium Backup (if you already have root) or simply copy your important files to the PC. A full backup via custom recovery is ideal but not mandatory for this method.
4. Download and Run Kingo Root (PC) – Download the Kingo Root PC software from the official website. Run the installer and launch the program. Connect your phone via USB – Kingo will detect it and install any missing drivers automatically.
5. Start Rooting – In Kingo Root, click the Root button. The software will push a root package to your phone and execute it. This may take a few minutes. Your phone will reboot automatically when done. Do not disconnect the USB cable during the process.
6. Verify Root Access – After reboot, install a root checker app from the Play Store (e.g., “Root Checker�) and run it. It should confirm that root access is granted. Alternatively, look for the SuperSU or Magisk app icon in your app drawer – its presence indicates root is installed.
7. Optional: Manual Root with Custom Recovery – If the one-click method fails, you can flash a custom recovery (TWRP) using tools like SP Flash Tool or Mobile Uncle Tools (requires an unlocked bootloader). Then download the SuperSU zip file and flash it from recovery. This method is more technical and requires precise steps – follow a dedicated guide for your phone model.

Common Mistakes

• Skipping USB debugging – Without it, the PC cannot communicate with the phone for root commands.
• Using a charge-only cable – Some USB cables only charge and don’t transfer data, causing detection failures.
• Not installing drivers properly – If the driver is not installed correctly, the rooting tool won’t see the device. Uninstall and reinstall drivers if needed.
• Disconnecting during root – Interrupting the process can soft-brick your phone. Always wait for the reboot.
• Ignoring battery level – A low battery during root can cause the phone to shut down mid-process. Keep it above 70%.

Tips

• Use a stable, original USB port on your PC (preferably USB 2.0) to avoid connection drops.
• Disable antivirus or Windows Defender temporarily – they may block the rooting tool from executing.
• After rooting, install a root management app like SuperSU or Magisk to control which apps get root access.
• Consider making a Nandroid backup via custom recovery before flashing anything else – it’s a full system snapshot.
• If you plan to install custom ROMs, unlock the bootloader first (if not already) and note that rooting may void your warranty.

Troubleshooting

• Phone not detected by PC – Try a different USB port, reinstall drivers, or use a different cable. On Windows, go to Device Manager and uninstall any “Unknown Deviceâ€� then rescan.
• Root process fails or gets stuck – Close other programs, disable antivirus, and try again. If it still fails, try the alternative manual method with SP Flash Tool and a custom recovery.
• Boot loop after rooting – This is rare but possible. Boot into recovery mode (usually Volume Up + Power), wipe cache and data, and reboot. If that doesn’t help, restore your backup or flash the stock ROM via SP Flash Tool.
• Root checker says no root – Re-run the rooting process, or manually flash SuperSU via custom recovery. Ensure that the root management app (SuperSU) is updated to the latest version.
• Phone stuck in a boot screen – Remove the battery, wait 30 seconds, reinsert and boot into recovery. From there, perform a factory reset (this will erase data).

Frequently Asked Questions

Will rooting my ZTE V967S void its warranty?

Yes, in most cases rooting voids the manufacturer’s warranty. Some carriers may allow it, but generally you lose official support. You can often unroot to restore the warranty, but it’s not guaranteed.

Can I root without a PC?

Yes, some apps like Kingo Root (Android version) or Framaroot can root directly on the device, but they are less reliable for this specific model. The PC method is more stable and recommended.

What is the difference between rooting and unlocking the bootloader?

Unlocking the bootloader allows you to flash custom recoveries and ROMs. Rooting gives you superuser access within the Android OS. You can root without unlocking, but for custom ROMs you usually need both.

Will I still receive OTA updates after rooting?

Usually not. Rooting modifies system files, so OTA updates may fail. You can manually flash updates or use custom ROMs that provide their own updates.

Can I unroot my ZTE V967S?

Yes, you can unroot by using the same rooting tool (Kingo Root has an “Unroot� button) or by flashing the stock firmware via SP Flash Tool. This restores the original system.

Is rooting safe for my phone?

Rooting itself is safe if done correctly. The main risks are software corruption if the process is interrupted, or security vulnerabilities if you grant root access to malicious apps. Always use trusted apps and be cautious about what you install.

Related

• Root LG Spirit 4G MS870: Full Guide
• Best Days to Fly: Smart Picks & Trade-Offs
• Location Sharing Off? How to Check & Turn It Back On