ThisCalculator

Everyday

How to Root ZTE Blade S7: Step-by-Step Guide

Updated · Standard formula, shown below

How to Root ZTE Blade S7: Step-by-Step Guide

Rooting your ZTE Blade S7 gives you full administrative control over the Android operating system, allowing you to remove bloatware, install custom ROMs, use root-only apps, and tweak system settings. This guide walks you through unlocking the bootloader, flashing a custom recovery, and installing Magisk to root the device. Before you begin, back up all important data, as the process will wipe your phone.

What You’ll Need

  • A Windows PC (or a Mac/Linux with appropriate drivers)
  • USB data cable for the ZTE Blade S7
  • ZTE USB drivers installed on your computer
  • ADB and Fastboot tools (download from the official Android developer site)
  • Magisk ZIP file (latest stable version)
  • Custom recovery image for ZTE Blade S7 (e.g., TWRP)
  • Unlocked bootloader (required for rooting)
  • Backup of your personal data (photos, contacts, etc.)

Step-by-Step

  1. Enable Developer Options: On your ZTE Blade S7, go to Settings → About phone. Tap Build number seven times until you see a message that Developer Options are enabled.
  2. Enable USB Debugging and OEM Unlock: Go to Settings → Developer options. Toggle on USB debugging and OEM unlocking. (If OEM unlocking is not present, your device may not support bootloader unlocking via this method.)
  3. Install ADB and Fastboot: Download the platform-tools from the official Android developer page and extract them to a folder on your PC (e.g., C:\adb).
  4. Connect Your Phone: Connect the ZTE Blade S7 to your PC via USB. On your phone, accept the RSA fingerprint prompt for USB debugging.
  5. Verify ADB Connection: Open a command prompt in the ADB folder (Shift+Right-click → Open command window here). Type adb devices and press Enter. Your device should appear as “device�. If not, reinstall drivers and try again.
  6. Reboot to Bootloader: Type adb reboot bootloader and press Enter. Your phone will reboot into fastboot mode (a screen with a robot or similar).
  7. Unlock the Bootloader: In fastboot mode, type fastboot oem unlock and press Enter. Confirm the unlock on your phone when prompted. This will wipe your device. (If your device uses a different command, check with your carrier or ZTE support.)
  8. Flash Custom Recovery (TWRP): Download the TWRP image for the ZTE Blade S7. Place it in the ADB folder. In fastboot mode, type fastboot flash recovery twrp.img (replace twrp.img with the actual filename). Then type fastboot reboot to boot back into Android.
  9. Boot into Recovery: Power off your phone. Hold Volume Up + Power buttons simultaneously until the TWRP logo appears. (Button combination may vary; try Volume Down if Volume Up doesn’t work.)
  10. Transfer Magisk ZIP: While in TWRP, connect your phone to the PC. Use adb push Magisk.zip /sdcard/ from the ADB folder, or simply copy the file to the phone’s internal storage via file explorer.
  11. Install Magisk: In TWRP, tap Install, navigate to the Magisk ZIP file, and select it. Swipe to confirm the flash. Wait for the process to complete.
  12. Reboot System: After flashing, tap Reboot System. Your phone will restart (first boot may take longer).
  13. Verify Root: Once booted, install a root checker app from the Play Store (e.g., Root Checker). Open it and tap “Verify Root�. You should see a message confirming root access.

Common Mistakes

  • Skipping OEM Unlock: Forgetting to enable OEM unlocking in Developer Options will cause the bootloader unlock command to fail.
  • Using Wrong Drivers: If ADB doesn’t recognize your device, it’s usually a driver issue. Install the correct ZTE USB drivers and ensure you’re using a data cable, not a charging-only one.
  • Flashing Wrong Recovery: Using a TWRP image for a different device can brick your phone. Always download the exact model-specific file.
  • Not Backing Up Data: Unlocking the bootloader erases all data. If you skip the backup, you’ll lose everything.
  • Incorrect Fastboot Commands: Typing commands incorrectly (e.g., fastboot flash recovery without the filename) will result in errors. Double-check your syntax.

Tips

  • Charge Your Battery: Ensure your phone is at least 70% charged before starting to avoid shutdown during flashing.
  • Use a Reliable USB Port: Use a rear USB port on your PC for a stable connection.
  • Keep the ADB Folder Clean: Place all necessary files (recovery, Magisk) in the same folder as adb.exe to make commands shorter and less error-prone.
  • Research Your Model: The ZTE Blade S7 may have regional variants. Confirm your exact model number (e.g., S7, S7+?) before downloading files.
  • Stay on Android Version: If you’re on a newer Android version, ensure Magisk is compatible. Check the Magisk release notes for supported versions.

Troubleshooting

  • ADB Not Recognizing Device: Reinstall drivers, try a different USB port, and ensure USB debugging is enabled. Also, check the device manager for any errors.
  • Bootloop After Rooting: If your phone gets stuck on the boot logo, boot into recovery (Volume Up + Power), then wipe cache and dalvik cache. If that fails, restore your backup or flash the stock ROM.
  • Fastboot Command Not Working: Make sure you’re in fastboot mode (the screen should say “FASTBOOTâ€� or similar). If the command hangs, try fastboot devices to see if your device is listed.
  • Magisk App Shows Not Installed: If the Magisk app is missing after flashing, download the Magisk APK from the official GitHub and install it manually. The app will detect the installed root.
  • Root Checker Fails: Some root checkers require internet access. If it fails, try another app or check if Superuser is granted in Magisk.
  • Phone Won’t Boot into Recovery: Try different button combinations (Volume Down + Power, or Volume Up + Power). If still not, reflash recovery using fastboot.

Frequently Asked Questions

Will rooting void my warranty?

Yes, rooting typically voids the manufacturer warranty. However, you can unroot and restore the stock firmware to regain warranty in many cases.

Is rooting safe?

Rooting itself is safe if done correctly, but there are risks of bricking your device if you flash incompatible files or make mistakes. Follow the guide carefully.

Can I get OTA updates after rooting?

Usually, OTA updates will fail on a rooted device. You may need to unroot temporarily or flash updates manually. Many custom ROMs provide their own update methods.

Will I lose my data?

Unlocking the bootloader will wipe all data. Always back up your phone before starting the process.

Can I unroot later?

Yes, you can unroot by flashing the stock firmware or by using Magisk’s “Uninstallâ€� option in the app.

What if I don’t have an OEM unlock option?

Some carrier-locked devices may not have the OEM unlock toggle. In that case, you may need to wait for a carrier unlock or find a workaround specific to your model.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.