ThisCalculator

Everyday

How to Root the Oppo Find: Full Guide

Updated · Standard formula, shown below

How to Root the Oppo Find: Full Guide

Rooting your Oppo Find gives you full administrative control over the Android operating system, allowing you to remove bloatware, install root-only apps, tweak system settings, and flash custom ROMs. This guide walks you through the entire process safely, from unlocking the bootloader to installing Magisk. Before you begin, back up all important data, as rooting will wipe your device, and ensure your phone is charged to at least 70%.

What You’ll Need

  • An Oppo Find device (model-specific steps may vary slightly, but the general process applies to most Oppo Find series).
  • A Windows PC (or a Mac/Linux with appropriate drivers).
  • USB data cable.
  • Oppo USB drivers installed on your PC.
  • ADB and Fastboot tools (download the platform-tools from the official Android developer site).
  • Magisk APK (latest stable version) – download from the official Magisk GitHub releases.
  • Your device’s stock boot.img file – you can extract it from the official firmware package (available from Oppo’s support site) or back it up before any modifications.
  • Unlocked bootloader – note that Oppo’s bootloader unlocking policy varies by region and model; some devices may not be officially unlockable. Check your specific model’s status.

Step-by-Step

  1. Back up your data. Rooting wipes your device. Copy photos, contacts, and files to a safe location.
  2. Enable Developer Options. Go to Settings > About Phone and tap the Build Number seven times until you see a message that developer mode is enabled.
  3. Enable OEM Unlocking and USB Debugging. In Settings > Developer Options, toggle on OEM Unlocking (if available) and USB Debugging.
  4. Install ADB and Fastboot. Download the platform-tools zip, extract it to a folder on your PC (e.g., C:\adb).
  5. Install Oppo USB drivers. Download and install the official drivers from Oppo’s website to ensure your PC recognizes the phone.
  6. Connect your phone to the PC. Use a good quality USB cable. When prompted on the phone, allow USB debugging.
  7. Test ADB connection. Open a command prompt in the platform-tools folder (Shift+Right-click > Open command window here). Type adb devices and press Enter. Your device should appear with “device� status. If not, check drivers and USB settings.
  8. Reboot to bootloader. Type adb reboot bootloader and press Enter. The phone will restart into fastboot mode.
  9. Unlock the bootloader. In fastboot mode, type fastboot flashing unlock (or fastboot oem unlock depending on your model). Confirm the unlock on the phone screen. This will wipe your data. After the process, the phone will reboot.
  10. Re-enable USB debugging. After the phone reboots, go back to Developer Options and re-enable USB debugging (and OEM unlocking if it got reset).
  11. Extract boot.img from firmware. Download the official firmware for your exact model from Oppo’s support site. Extract the payload.bin file and use a tool like payload dumper (available on GitHub) to extract the boot.img.
  12. Patch boot.img with Magisk. Transfer the boot.img to your phone. Install the Magisk APK on your phone. Open Magisk, tap “Install� next to Magisk, select “Select and Patch a File�, choose the boot.img, and let it patch. The patched file will be saved in the Download folder (usually named magisk_patched.img).
  13. Copy patched boot.img to PC. Transfer the magisk_patched.img to your PC.
  14. Reboot to bootloader again. With the phone connected and USB debugging enabled, run adb reboot bootloader.
  15. Flash the patched boot.img. In fastboot mode, type fastboot flash boot magisk_patched.img and press Enter. Wait for the flash to complete.
  16. Reboot. Type fastboot reboot. The phone will restart. It may take a few minutes on the first boot.
  17. Verify root. After boot, open the Magisk app. It should show “Installed� with the Magisk version. You can also install a root checker app from the Play Store to confirm.

Common Mistakes

  • Skipping the backup. Forgetting to back up data is the most common and painful mistake—rooting wipes everything.
  • Using the wrong boot.img. Flashing a boot.img from a different firmware version or model can cause boot loops or brick the device.
  • Not enabling OEM unlocking. If this option is missing or disabled, the bootloader unlock command will fail.
  • Incorrect fastboot command. Using the wrong unlock command (e.g., oem unlock vs flashing unlock) can result in an error. Check your device’s specific command.
  • Interrupting the process. Unplugging the USB cable or turning off the PC during flashing can brick the phone.
  • Not re-enabling USB debugging. After the bootloader unlock, USB debugging is often reset, causing adb commands to fail.

Tips

  • Always use the official firmware and tools to avoid malware and compatibility issues.
  • Keep your phone charged above 70% to prevent shutdown during the process.
  • Use a short, high-quality USB cable and connect directly to a USB port on your PC (not a hub).
  • Read your device’s specific forum (e.g., XDA Developers) for model-specific quirks and known issues.
  • After rooting, consider installing a custom recovery like TWRP to make backups and flash mods more easily.
  • If you ever need to unroot, you can flash the stock boot.img back using the same fastboot method.

Troubleshooting

Boot loop after flashing: This usually means the patched boot.img is incompatible. Download the correct firmware, extract the boot.img again, and re-patch with the latest Magisk. Flash the stock boot.img first to recover, then try again.

Fastboot not recognizing device: Ensure drivers are installed correctly. Try a different USB port or cable. On Windows, check Device Manager for any yellow exclamation marks. Also, make sure you are in fastboot mode (screen shows “Fastboot� or “FASTBOOT MODE�).

OEM unlocking option is grayed out: This is often due to carrier restrictions or regional policies. Some Oppo devices cannot be bootloader unlocked officially. You may need to wait for a third-party tool or use a different method (not covered here).

Magisk app shows “Not installed�: The patch may not have been applied correctly. Re-patch the boot.img and reflash. Also, ensure you are using the latest Magisk version.

adb devices shows “unauthorizedâ€�: On your phone, a prompt appears asking to allow USB debugging. Accept it and check “Always allow from this computerâ€�. If it doesn’t appear, revoke USB debugging authorizations in Developer Options and try again.

Phone is stuck on boot logo: This is a soft brick. Try holding the power button for 10-15 seconds to force restart. If it persists, boot into recovery (usually Volume Down + Power) and perform a factory reset. If that fails, flash the stock boot.img via fastboot.

Frequently Asked Questions

Will rooting void my warranty?

Yes, rooting typically voids the manufacturer’s warranty. Some regions have laws protecting consumer rights, but generally, you assume the risk. You can often unroot and restore the stock firmware to regain warranty eligibility, but it’s not guaranteed.

Can I still receive OTA updates after rooting?

Usually no, because the system partition is modified. You’ll need to manually flash updates or use custom ROMs that support OTA. Some devices can receive OTA if you use Magisk’s “Preserve AVB 2.0/dm-verityâ€� option, but it’s not reliable across all models.

Is rooting safe for my data?

Rooting itself is safe if done correctly, but the process wipes your data. After rooting, you have more control, but you also risk damaging the system if you misuse root privileges. Always back up before making system changes.

What are the risks of rooting?

The main risks include bricking your device (making it unusable), voiding warranty, losing OTA updates, and security vulnerabilities if you grant root access to malicious apps. Following instructions carefully minimizes these risks.

Can I unroot my Oppo Find?

Yes, you can unroot by flashing the stock boot.img back to your device. Download the official firmware, extract the boot.img, and flash it via fastboot. This will remove Magisk and restore the original boot partition, but your data will remain intact.

Do I need to unlock the bootloader to root?

Yes, unlocking the bootloader is a prerequisite for rooting on most modern Android devices, including the Oppo Find. It allows you to flash custom images and is the first step in the rooting process.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.