ThisCalculator

Everyday

How to Root LG Optimus F3Q T-Mobile Guide

Updated · Standard formula, shown below

How to Root LG Optimus F3Q T-Mobile Guide

This guide walks you through rooting the LG Optimus F3Q on T-Mobile, giving you administrative access to remove bloatware, install custom recovery, and enable system-level tweaks. You will need a Windows PC, the original USB cable, and about 30 minutes. The process uses a one-click tool that automates the exploit, so no command-line experience is required.

What You’ll Need

  • LG Optimus F3Q (T-Mobile model LS720 or MS870) with at least 50% battery
  • Windows PC (XP, 7, 8, or 10) with USB drivers installed
  • Original micro-USB cable
  • LG USB drivers (download from LG’s support site)
  • Rooting tool: LG One Click Root (version 1.1 or newer)
  • Backup of your personal data (photos, contacts, messages)

Step-by-Step

  1. Enable USB debugging: On your phone, go to Settings > About Phone > tap Build Number seven times until you see “You are now a developer.” Then go to Settings > Developer Options > check USB Debugging.
  2. Install LG USB drivers: Download and run the LG Mobile Support Tool or the standalone USB driver package. Connect your phone to the PC and let Windows finish installing the drivers. Verify the device appears under Device Manager as “ADB Interface” or “LGE Mobile” without errors.
  3. Download the rooting tool: Get LG One Click Root from a reputable source like XDA Developers. Extract the ZIP to a folder on your desktop. Do not run it from inside the archive.
  4. Connect your phone: Plug the phone into the PC with the original cable. On the phone, when prompted, allow the computer to access the device. If asked about USB connection type, choose “Charge only” or “Media sync”—either works for ADB.
  5. Run the tool as administrator: Right-click on the extracted .exe file and select “Run as administrator.” If Windows SmartScreen appears, click “More info” then “Run anyway”—this is a known false positive for unsigned tools.
  6. Start the root process: In the tool’s window, click the “Root” button. The tool will push a temporary exploit, install Superuser, and reboot your phone automatically. This takes 2–5 minutes. Do not unplug the cable or touch the phone during this time.
  7. Verify root: After the phone reboots, look for the Superuser app in your app drawer. Open it and check that the binary is up to date. To confirm, install a root checker app from the Play Store and run it—it should say “Root access is properly installed.”

Common Mistakes

  • Skipping the driver install: If the PC doesn’t recognize the phone, the tool will fail with “Device not found.” Always install the LG driver package first, even if Windows says it found generic drivers.
  • Using a non-original cable: Cheap third-party cables often lack data pins or have poor shielding, causing intermittent disconnects. Use the cable that came in the box.
  • Running the tool from a ZIP: Extracting to a folder is mandatory. Running from inside the archive can cause the exploit files to be blocked by Windows.
  • Not enabling USB debugging: The tool relies on ADB, which only works with USB debugging enabled. If you skip step 1, the process stalls at “Waiting for device.”
  • Interrupting the process: Pulling the cable or pressing buttons during the root can soft-brick the phone. Let it reboot on its own.

Tips

  • Back up your data before starting. Rooting does not wipe the phone, but a failed exploit can force a factory reset.
  • Keep the phone on a flat surface and avoid touching it while the tool runs. The screen may flicker—this is normal.
  • After rooting, install a custom recovery like TWRP if you plan to flash ROMs. The One Click Root only installs Superuser, not recovery.
  • If you want to unroot later, the same tool has an “Unroot” button. Alternatively, use Superuser’s built-in unroot option.
  • Write down your phone’s model number (Settings > About Phone) before you start. The tool may ask for it if you need support.

Troubleshooting

Tool says “Device not found”: Reinstall the LG drivers, try a different USB port (preferably a rear port on a desktop), and restart both the phone and PC. Check that USB debugging is still enabled—some phones turn it off after a reboot.

Phone reboots but Superuser is missing: The exploit may have partially succeeded. Run the tool again. If it still fails, manually install Superuser from the Play Store—it will request root access and the binary may already be present.

Phone stuck on boot logo: This is rare with this tool. Hold the power button for 10 seconds to force a restart. If it still hangs, boot into recovery (hold Volume Down + Power) and select “Wipe data/factory reset.” This will erase your data but should restore the phone.

Windows blocks the .exe: The tool is unsigned, so antivirus may quarantine it. Temporarily disable real-time protection, run the tool, then re-enable it. Do not disable your firewall.

Root checker says “Not rooted”: Open Superuser and check for binary updates. If the binary is outdated, the app will prompt you to update it. If that fails, re-run the One Click Root with the phone connected in the same mode.

Phone is not recognized in Device Manager: Uninstall the device from Device Manager, unplug the phone, reboot the PC, reinstall the drivers, and reconnect. Sometimes the order matters—install drivers before plugging in the phone.

Frequently Asked Questions

Will rooting void my warranty? Yes, rooting typically voids the manufacturer’s warranty. However, you can unroot with the same tool, and if you restore the phone to stock firmware, most carriers won’t detect it.

Can I get OTA updates after rooting? Generally no. System updates will fail or cause boot loops. You can re-lock the bootloader or unroot to receive updates, but it’s easier to flash custom ROMs that include updates.

Does rooting improve battery life? Not directly. Rooting gives you tools like Greenify or BetterBatteryStats to identify and stop battery-draining apps, but the root itself doesn’t change battery performance.

Is it possible to brick my phone? Yes, but the risk is low with this one-click method. The main risk is interrupting the process or flashing incompatible files afterward. Follow the steps exactly and you should be fine.

What can I do after rooting? You can remove pre-installed T-Mobile bloatware, install a custom kernel for overclocking, use ad-blockers, backup apps with Titanium Backup, and flash custom ROMs like LineageOS.

How do I unroot? Use the same LG One Click Root tool and click the “Unroot” button. Alternatively, open Superuser, go to Settings, and select “Cleanup” to remove the binary—then uninstall the app.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.