ThisCalculator

Everyday

How to Root Lenovo A6000: Full Guide

Updated · Standard formula, shown below

How to Root Lenovo A6000: Full Guide

Rooting your Lenovo A6000 gives you full administrative control over the Android operating system, allowing you to remove bloatware, install custom ROMs, use root-only apps, and tweak system settings for better performance or battery life. This guide walks you through the entire process using a reliable, widely used method. Before starting, back up all important data, ensure your phone has at least 70% battery, and understand that rooting voids your warranty and carries a small risk of bricking the device if steps are not followed exactly.

What You’ll Need

  • A Lenovo A6000 (or A6000 Plus) with Android 4.4.4 KitKat or 5.0 Lollipop
  • A Windows PC (Windows 7, 8, 10, or 11)
  • A USB data cable that can transfer files
  • Lenovo USB drivers installed on your PC
  • KingRoot APK (version 4.9.2 or newer) – download from a trusted source
  • SuperSU flashable ZIP file (for replacing KingRoot with a more stable root manager)
  • Custom recovery (TWRP or CWM) for the Lenovo A6000 – optional but recommended
  • An unlocked bootloader – required for custom recovery and permanent root

Step-by-Step

  1. Enable Developer Options and USB Debugging
    On your phone, go to Settings > About Phone. Tap Build Number seven times until you see “You are now a developer!�. Then go back to Settings > Developer Options and enable USB Debugging and OEM Unlocking (if available).
  2. Install Lenovo USB Drivers on your PC
    Download the official Lenovo USB drivers for the A6000 and install them. Restart your PC after installation to ensure the drivers are properly loaded.
  3. Connect your phone to the PC
    Use the USB cable to connect your phone to the PC. Set the USB connection mode to “File Transfer (MTP)� from the notification shade. Your PC should recognize the device; if not, reinstall the drivers.
  4. Unlock the Bootloader (if not already unlocked)
    With the phone connected and USB debugging enabled, open a command prompt on your PC. Type adb devices to confirm the phone is listed. Then type adb reboot bootloader. Once in fastboot mode, type fastboot oem unlock and confirm on the phone screen. This wipes all data, so ensure you have backed up. After unlocking, reboot the phone by typing fastboot reboot.
  5. Install Custom Recovery (TWRP)
    Download the TWRP recovery image for the Lenovo A6000 (usually named twrp-3.x.x-0-a6000.img). Place it in the same folder as your ADB tools. Boot your phone into fastboot mode again (using the command from step 4). Then type fastboot flash recovery twrp-3.x.x-0-a6000.img. After flashing, type fastboot reboot but immediately hold Volume Up + Power to boot into recovery. If you skip this, the stock recovery will overwrite TWRP.
  6. Backup your current ROM (optional but recommended)
    In TWRP, tap Backup, select all partitions, and swipe to back up. This creates a safety net you can restore if anything goes wrong.
  7. Install KingRoot APK
    Reboot the phone normally. Transfer the KingRoot APK to your phone’s internal storage. Using a file manager, tap the APK to install it. You may need to enable “Unknown Sources� in Settings > Security.
  8. Run KingRoot to gain temporary root
    Open KingRoot. It will scan your device and display a “Root� button. Tap it and wait for the process to complete (may take 1-3 minutes). If successful, you’ll see a message confirming root access. Do not reboot yet.
  9. Replace KingRoot with SuperSU (recommended)
    Download the SuperSU ZIP file (e.g., SuperSU-v2.82-201705271743.zip) and place it on your phone’s SD card. Reboot into TWRP recovery (hold Volume Up + Power). Tap Install, select the SuperSU ZIP, and swipe to flash. After flashing, tap Wipe Cache/Dalvik and reboot.
  10. Verify root access
    After reboot, install a root checker app from the Play Store (e.g., “Root Checker�). Open it and tap “Verify Root�. If it says “Root access is properly installed�, you are done. You can also open SuperSU – it will ask to update the binary, which you should do via Normal mode.

Common Mistakes

  • Skipping the bootloader unlock: Without unlocking, custom recovery will not stick, and root may not survive a reboot.
  • Not holding the right key combo to enter recovery after flashing: If you let the phone boot normally, the stock recovery overwrites TWRP, forcing you to reflash.
  • Using the wrong TWRP image: The A6000 has a specific variant; using an image for another device will brick your phone. Always double-check the filename and source.
  • Forgetting to enable USB debugging: ADB commands will fail with “device not foundâ€�.
  • Interrupting the KingRoot process: Do not touch the phone or disconnect the USB while rooting is in progress.
  • Not backing up before unlocking: Unlocking the bootloader wipes all data – losing photos, contacts, and app data is a common regret.

Tips

  • After rooting, install a firewall app (like AFWall+) to control which apps have internet access – this improves privacy and saves battery.
  • Use a root uninstaller (e.g., System App Remover) to remove bloatware, but be careful not to delete essential system components.
  • Always keep a Nandroid backup (from TWRP) on your SD card before making major system changes.
  • If you plan to flash custom ROMs, make sure they are specifically built for the Lenovo A6000 (codename “A6000â€�).
  • After rooting, you can install Greenify to hibernate background apps and extend battery life significantly.
  • Keep your phone’s bootloader unlocked if you want to easily switch between ROMs; locking it again requires a full wipe.

Troubleshooting

  • ADB says “device not foundâ€�: Reinstall USB drivers, try a different USB port, disable and re-enable USB debugging, and ensure the phone is in MTP mode. Also check that the ADB version is up to date.
  • KingRoot fails with “Root failedâ€�: This can happen if the firmware is too new or too old. Try a different version of KingRoot, or use an alternative one-click root tool like iRoot or KingoRoot. Alternatively, root manually via fastboot flashing SuperSU.
  • Phone stuck in boot loop after rooting: Boot into TWRP (Volume Up + Power) and restore the backup you made earlier. If you didn’t make a backup, flash the stock firmware using SP Flash Tool.
  • TWRP doesn’t stick after reboot: You likely didn’t boot into recovery immediately after flashing. Reflash TWRP and immediately boot into it. Also ensure the bootloader is unlocked.
  • SuperSU binary update fails: This is common with KingRoot leftovers. Reboot into TWRP, flash the SuperSU ZIP again, and wipe cache. If it still fails, try flashing a newer SuperSU version.
  • Root checker says “not rootedâ€� after reboot: The root may not be persistent. Make sure you replaced KingRoot with SuperSU – KingRoot’s root is often temporary. Also, verify that the bootloader is unlocked and TWRP is installed.

Frequently Asked Questions

Will rooting my Lenovo A6000 void the warranty?

Yes, rooting typically voids the manufacturer’s warranty. You can often unroot by flashing the stock firmware, but the bootloader unlock status may still be detected.

Can I root without unlocking the bootloader?

Yes, using one-click tools like KingRoot may work without unlocking the bootloader, but the root is often temporary and may not survive a reboot. For a permanent root, unlocking the bootloader is recommended.

What is the difference between KingRoot and SuperSU?

KingRoot is a one-click root app that uses a proprietary method, but it is often considered less stable and has been criticized for privacy concerns. SuperSU is a traditional root manager that gives you full control and is more reliable for ongoing use.

Will rooting delete my data?

Unlocking the bootloader will wipe all data. The root process itself (via KingRoot or SuperSU) does not delete data, but it’s always wise to back up before starting.

Can I unroot my Lenovo A6000 later?

Yes, you can unroot by flashing the stock firmware using SP Flash Tool, or by removing SuperSU from within the app (if you used the systemless method). This will restore the phone to factory state, but the bootloader will remain unlocked unless you lock it again.

Is it safe to root my phone?

Rooting is safe if you follow the steps correctly and use reliable tools. The main risks are bricking the device if you flash wrong files, or security risks if you grant root access to malicious apps. Always download files from trusted sources and be cautious about what you grant root to.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.