ThisCalculator

Everyday

How to Root Lava Iris X1: Full Guide

Updated · Standard formula, shown below

How to Root Lava Iris X1: Full Guide

Rooting your Lava Iris X1 gives you full administrative control over the Android operating system, letting you remove bloatware, install custom ROMs, use root-only apps, and tweak system settings that are normally locked. This guide walks you through the entire process safely, from unlocking the bootloader to installing Magisk. Before you start, back up your data and ensure your device is charged above 70%.

What You’ll Need

  • Lava Iris X1 with at least 70% battery
  • A Windows PC (or a Mac with minimal ADB support)
  • USB data cable (the one that came with the phone works best)
  • Backup of your important files (photos, contacts, messages)
  • Internet connection to download required files
  • Enable Developer Options and USB Debugging on your phone
  • Download the following files:
    • SP Flash Tool (for MediaTek devices)
    • Lava Iris X1 stock ROM (to extract boot.img)
    • Magisk APK (rename to .zip for flashing)
    • ADB and Fastboot drivers

Step-by-Step

  1. Enable Developer Options: Go to Settings → About Phone → tap “Build Number� seven times until you see “You are now a developer!�
  2. Turn on USB Debugging: Go to Settings → Developer Options → enable “USB Debugging� and “OEM Unlocking� (if available).
  3. Install ADB and Fastboot on your PC: Download the platform-tools from the Android developer site, extract them to a folder like C:\adb, and add that folder to your system PATH.
  4. Install USB drivers: Install the MediaTek USB VCOM drivers (included with SP Flash Tool) so your PC recognizes the phone.
  5. Backup your device: Use the built-in backup or a third-party app to save your data. Rooting will wipe your phone.
  6. Unlock the bootloader (if applicable): On some Lava Iris X1 units, the bootloader is already unlocked. To check, reboot into fastboot mode (Power + Volume Down) and run fastboot oem unlock. If it says “already unlocked,� proceed.
  7. Download the stock ROM: Find the official Lava Iris X1 stock ROM from a reliable source (e.g., Lava’s support page or a trusted forum). Extract it to a folder.
  8. Extract boot.img: Inside the ROM folder, locate the file named boot.img. Copy it to your PC’s ADB folder.
  9. Patch boot.img with Magisk: Transfer boot.img to your phone’s internal storage. Install the Magisk APK, open it, tap “Install� → “Select and Patch a File�, choose boot.img, and wait for it to finish. The patched file will be saved in Download folder as magisk_patched.img.
  10. Copy patched image to PC: Move magisk_patched.img from your phone to the ADB folder on your PC.
  11. Boot into fastboot mode: Turn off the phone. Press and hold Volume Down + Power until the fastboot screen appears.
  12. Flash the patched boot image: Connect the phone to PC via USB. Open a command prompt in the ADB folder and run: fastboot flash boot magisk_patched.img
  13. Reboot: After flashing, run fastboot reboot. Your phone will restart. This may take a few minutes on first boot.
  14. Verify root: Once booted, open the Magisk app. If it shows “Magisk is up to date� and “Installed� with a version number, root is successful. You can also use a root checker app from the Play Store.

Common Mistakes

  • Using the wrong boot.img: Make sure the boot.img is from the exact build number of your phone’s firmware. A mismatched boot image can cause a bootloop.
  • Skipping backup: Rooting wipes data. Always back up before starting.
  • Not enabling USB Debugging: Without it, ADB won’t recognize your device.
  • Flashing with SP Flash Tool instead of fastboot: This guide uses fastboot. Using SP Flash Tool incorrectly can brick your device.
  • Interrupting the flash: Do not unplug the USB cable during flashing. Wait for the command to finish completely.

Tips

  • Use the original USB cable and a USB 2.0 port for stable connection.
  • Keep the phone charged above 50% during the process.
  • After rooting, install a good backup app like Titanium Backup to manage system apps.
  • If you plan to install custom ROMs, note that the Lava Iris X1 has limited custom ROM support; check XDA forums for compatible builds.
  • Always download Magisk from the official GitHub repository to avoid malware.

Troubleshooting

  • Device not detected by fastboot: Install the correct USB drivers, try a different port, or run fastboot devices to check. If nothing, reinstall drivers.
  • Bootloop after flashing: If your phone gets stuck on the logo, reboot into recovery (Volume Up + Power) and wipe cache/data. If that fails, reflash the stock boot.img from your ROM to restore, then repeat the process.
  • Magisk app shows “Not installedâ€�: The patched image might not have flashed correctly. Reflash the patched image using the same method, ensuring the command says “OKAYâ€�.
  • Root checker says no root: Try reinstalling Magisk via the app’s “Direct Installâ€� method (if you have a custom recovery) or use the patched image method again.
  • Fastboot command fails with “FAILED (remote: unknown command)â€�: Your bootloader might be locked. Try fastboot oem unlock first, then flash again.

Frequently Asked Questions

Will rooting void my warranty?

Yes, rooting typically voids the manufacturer’s warranty. However, you can often restore the warranty by flashing the stock firmware (unrooting) before sending it for service.

Can I unroot my Lava Iris X1?

Yes. You can unroot by flashing the original stock boot.img via fastboot, or by using the “Uninstall� option in the Magisk app if you installed via Direct Install.

Is rooting safe?

Rooting itself is safe if done correctly. The risk lies in flashing wrong files or making mistakes, which can brick the device. Following this guide minimizes that risk.

Will I lose my data?

Yes, the bootloader unlock and flashing process will wipe all data. Always back up before starting.

Can I still receive OTA updates after rooting?

Usually not. Rooting modifies the system partition, so OTA updates may fail. You can still manually flash updates via fastboot or SP Flash Tool.

What if I don’t have a Windows PC?

You can use a Mac or Linux with ADB installed. The fastboot commands are the same, but driver installation differs. For Mac, you may need to install the Android File Transfer and use the terminal.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.