ThisCalculator

Everyday

How to Reset HP Printer to Factory Settings

Updated · Standard formula, shown below

Resetting your HP printer to factory settings restores its original out-of-the-box state, clearing custom settings, network configurations, and stored data. This is useful when you’re troubleshooting persistent issues, preparing to sell or give away the printer, or starting fresh with a new setup. Before you begin, ensure the printer is powered on and you have access to its control panel or the HP Smart app.

What You’ll Need

  • Your HP printer (powered on)
  • Access to the printer’s control panel (touchscreen or buttons)
  • Optional: HP Smart app or a web browser for network-connected printers
  • Your Wi-Fi network name and password (to reconnect after reset)

Step-by-Step

The reset process varies slightly depending on your printer model. Use the method that matches your printer’s interface.

Method 1: Using the Touchscreen Control Panel

  1. On the printer’s touchscreen, swipe down from the top of the screen to open the Dashboard (or tap the gear icon).
  2. Tap Setup (or the wrench icon).
  3. Scroll and select Printer Maintenance (or Tools).
  4. Tap Restore or Reset.
  5. Choose Restore Factory Settings (or Factory Reset).
  6. Confirm the action when prompted. The printer will restart automatically.

Method 2: Using the Buttons (Non-Touchscreen Models)

  1. With the printer on, press and hold the Cancel (X) button and the Wireless button simultaneously for about 10 seconds.
  2. Release the buttons when the Power light starts blinking.
  3. The printer will reset and restart. This works on many HP DeskJet and ENVY models.

Method 3: Using the HP Smart App (for Network Printers)

  1. Open the HP Smart app on your computer or mobile device.
  2. Select your printer from the dashboard.
  3. Click Printer Settings (or the gear icon).
  4. Scroll down and select Printer Maintenance or Advanced Settings.
  5. Look for Restore Factory Defaults or Factory Reset and follow the on-screen prompts.

Method 4: Using the Embedded Web Server (EWS)

  1. Find your printer’s IP address: On the printer, go to Setup > Network > View Network Settings (or print a network configuration page).
  2. Open a web browser on a computer connected to the same network, and enter the IP address in the address bar.
  3. Log in to the EWS (default admin password is often admin or blank).
  4. Go to System or Administration tab.
  5. Find Restore Factory Defaults or Factory Reset and click it.
  6. Confirm the reset and wait for the printer to reboot.

Common Mistakes

  • Choosing the wrong reset option: Many HP printers have both a “Restore Network Defaults” and a “Restore Factory Settings”. The former only resets Wi-Fi and network settings; the latter clears everything. Make sure you select the full factory reset.
  • Interrupting the reset: Do not unplug the printer or turn it off during the reset process. This can corrupt the firmware and cause more serious problems.
  • Not saving important settings: A factory reset will erase your Wi-Fi password, custom scan settings, and any stored fax numbers. If you need them, write them down first.
  • Assuming the printer is reset when it’s not: Some models require you to confirm the reset twice. If the printer doesn’t restart, check the screen for a confirmation prompt.

Tips

  • After the reset, the printer will restart and may show a setup wizard. Follow the prompts to reconnect it to your Wi-Fi network.
  • If you’re selling or giving away the printer, a factory reset is essential to remove your personal data and network credentials.
  • If the printer still has issues after a reset, check for firmware updates on HP’s support website.
  • For printers with a touchscreen, you can often find the reset option under Settings > Printer Maintenance > Restore.
  • If you can’t find the reset option, consult your printer’s user manual or HP’s support page for model-specific instructions.

Troubleshooting

  • Printer doesn’t respond to the button combination: Try a different combination (e.g., hold the Resume button and the Wireless button). If that fails, use the touchscreen or EWS method instead.
  • Reset option not available in the menu: Some entry-level models may not have a factory reset option in the menu. In that case, use the button combination or the HP Smart app. If still unavailable, contact HP support.
  • Printer is stuck on the reset screen: Wait at least 10 minutes. If it doesn’t progress, unplug the printer for 60 seconds, plug it back in, and try again.
  • Can’t access the EWS: Make sure your computer is on the same network as the printer. Try using the printer’s IP address in a different browser. If the page doesn’t load, the printer may not have a valid IP address—print a network configuration page to verify.
  • After reset, printer won’t connect to Wi-Fi: Run the Wireless Setup Wizard from the printer’s control panel (usually under Setup > Network > Wireless Setup Wizard). Re-enter your Wi-Fi password.

Frequently Asked Questions

Will a factory reset remove the printer’s firmware?

No, a factory reset restores default settings but does not downgrade or remove firmware. The printer will keep its current firmware version.

Will a factory reset clear the ink level information?

No, ink levels are stored in the cartridges themselves and are not affected by a factory reset. The printer will still show the correct ink levels.

How long does a factory reset take?

Typically, the reset takes 1 to 3 minutes, including the automatic restart. Some models may take up to 5 minutes.

Do I need to reinstall the printer drivers after a factory reset?

No, the drivers on your computer remain intact. However, you will need to reconnect the printer to your Wi-Fi network and possibly re-add it to the HP Smart app.

Will a factory reset fix paper jam errors?

Usually not. Paper jams are mechanical issues. A reset may clear a temporary error, but if the jam persists, you need to physically remove the paper and check for obstructions.

Can I reset my HP printer without a touchscreen?

Yes, many non-touchscreen models have a button combination (like holding Cancel and Wireless) that triggers a factory reset. Check your manual for the exact combination.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.