ThisCalculator

Everyday

How to Fix Galaxy S9 IMEI Problem: Step-by-Step

Updated · Standard formula, shown below

This guide walks you through repairing a missing or corrupted IMEI number on a Samsung Galaxy S9. You’ll learn how to restore the IMEI using a combination of Android settings, Odin flashing, and a backup restore. Before starting, back up all personal data, ensure your phone has at least 70% battery, and have a Windows PC with the necessary drivers installed.

What You’ll Need

  • Windows PC with USB port
  • USB data cable (preferably original Samsung)
  • Samsung USB drivers installed on PC
  • Odin3 software (latest version)
  • Stock firmware for your exact Galaxy S9 model (e.g., SM-G960F)
  • Backup of your EFS partition (or a backup from the same model)
  • Root access (temporary or permanent) – required for some methods
  • Hex editor (like HxD) if you need to edit the EFS backup

Step-by-Step

  1. Identify the root cause. Check if the IMEI is missing by dialing *#06#. If it shows ‘null’ or ‘unknown’, proceed. Common causes: bad flash, corrupted EFS partition, or a failed OTA update.
  2. Backup current state. If the phone boots, enable USB debugging (Settings > Developer options). If not, skip to step 4.
  3. Try the simple fix – reboot and toggle airplane mode. Sometimes a temporary glitch clears. Turn on airplane mode, wait 30 seconds, turn it off, and check *#06#.
  4. Flash stock firmware with Odin. This restores the modem and baseband. Download the correct firmware for your model and region. Power off the phone, then boot into Download mode (hold Volume Down + Power + Bixby). Open Odin, connect the phone, click ‘AP’ and select the firmware file. Ensure ‘Re-Partition’ is unchecked. Click ‘Start’ and wait for ‘PASS’. Reboot and check IMEI.
  5. If IMEI still missing, restore EFS backup. This requires root. Boot the phone, install Magisk or SuperSU to gain root. Use a root explorer (like Root Explorer) to navigate to /dev/block and find the partition named ‘efs’ (often /dev/block/sda14). Copy the entire ‘efs’ folder to your PC using adb pull.
  6. Restore from backup. If you have a backup of the EFS folder (from before the issue), use adb push to copy it back to the phone. Reboot and check.
  7. If no backup, use a donor EFS backup. Find a backup from the same model (e.g., from a forum). Extract the ‘efs’ folder, then use a hex editor to change the IMEI inside the ‘nv_data.bin’ file to your original IMEI (find it on the sticker under the battery or on the original box). This is advanced – you must replace the exact bytes.
  8. Write the modified EFS. With root, copy the modified ‘nv_data.bin’ back to the phone’s EFS partition. Set permissions to 660. Reboot.
  9. Verify. Dial *#06# to see if the IMEI appears correctly. Also test calls and mobile data.

Common Mistakes

  • Using the wrong firmware variant (e.g., SM-G960U on a SM-G960F) – always match the exact model number.
  • Forgetting to back up the EFS before flashing – always do this first.
  • Editing the IMEI incorrectly – a single wrong byte can brick the phone.
  • Skipping the driver installation – Odin won’t recognize the phone without proper drivers.
  • Not disabling ‘Re-Partition’ in Odin – this can wipe the EFS permanently.

Tips

  • Always use a genuine USB cable and a USB port directly on the PC (not a hub).
  • Keep a backup of your EFS partition on your PC and in cloud storage – it’s unique to your phone.
  • If you’re not comfortable with hex editing, consider using a paid tool like Octoplus or Z3X – but be aware of the costs and legality.
  • After any flash, perform a factory reset to clear cache that might cause conflicts.
  • Check the IMEI in both SIM slots – some flashes only restore one.

Troubleshooting

If the IMEI is still missing after following these steps:

  • Odin fails with ‘FAIL’ – Re-download the firmware, try a different USB port, or reinstall Samsung drivers. Also, disable Windows driver signature enforcement if needed.
  • Phone boots to a black screen after EFS restore – The EFS partition may be corrupt. Re-flash the full firmware, then try a different backup source.
  • IMEI shows but no signal – The modem partition may be damaged. Flash the modem separately via Odin (in the ‘CP’ slot).
  • Root lost after flashing – Re-root with Magisk patched AP file.
  • Hex editor changes don’t stick – Ensure the file permissions are set to rw-rw—- (660) and that you’re editing the correct file (nv_data.bin, not nv_data.bin.md5).

Frequently Asked Questions

Is it legal to repair my own IMEI?

In most countries, restoring your own device’s IMEI is legal, but altering it to a different number is not. Only restore the original IMEI that came with your phone.

Will this void my warranty?

Yes, flashing custom firmware or rooting will void your Samsung warranty. However, if the phone is already out of warranty, this is a common repair path.

Can I fix the IMEI without a PC?

No, the methods described require a PC for Odin and adb commands. There is no reliable on-device fix.

What if I don’t have an EFS backup?

You can try using a backup from another S9 of the same model, but you must edit the IMEI to match yours. If you don’t have your original IMEI, check the sticker under the battery or the original box.

Why did my IMEI disappear in the first place?

Common causes include a failed OTA update, flashing wrong firmware, or a corrupt EFS partition due to a sudden power loss during a flash.

How long does this repair take?

If you have the backup and firmware ready, the process takes about 30–60 minutes, including download time. If you need to find and edit a donor backup, it can take a few hours.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.