ThisCalculator

Everyday

Robotics Team Competition Prep: Roles, Tests, Checklists

Updated · Standard formula, shown below

This guide walks you through preparing a robotics team for competition by defining roles, running structured testing sessions, and using checklists to catch problems before they cost you on the field. You’ll end up with a team that knows who does what, a robot that has been pushed through realistic scenarios, and a pit area that runs smoothly.

What You’ll Need

  • Competition rules and scoring document (current season)
  • Robot with all subsystems assembled (drive, intake, shooter/arm, sensors)
  • Spare parts kit: motors, gears, belts, screws, zip ties, connectors
  • Tools: hex drivers, wrenches, screwdrivers, multimeter, soldering iron
  • Laptop with programming software and a way to download code
  • Field elements or practice versions (or tape/markers to simulate)
  • Batteries charged and a charger on hand
  • Notebook or digital doc for logs
  • Printed checklists (or a shared phone/tablet doc)
  • Timer or stopwatch

Step-by-Step

  1. Review the rules as a full team. Read the scoring section aloud. Highlight what earns points and what gets penalties. Make a list of the top three scoring actions and the most common fouls. Everyone needs to know these, not just the drive team.
  2. Assign roles based on skills, not seniority. Typical roles: drive team (driver, operator, human player), coach, drive coach (calls strategy), pit crew lead (fixes robot), programmer (loads code and handles sensor issues), scout (watches other teams), and safety captain. Write each name next to a role and post it in the pit.
  3. Create a role matrix with backup assignments. For every role, list who is primary and who is backup. If the driver is sick, the operator moves up and the backup takes operator. This prevents chaos at the event.
  4. Build a testing schedule that mirrors match length. If matches are 2:30, run 2:30 practice cycles with full robot resets between them. Include autonomous, teleop, and endgame. Do this at least 10 times over the two weeks before competition.
  5. Write a test checklist for each subsystem. For the drive: check motor direction, encoder values, wheel torque. For the shooter: check speed consistency, feed jams, and accuracy at different distances. For the intake: check pickup angle, belt tension, and reverse function. For sensors: check that limits and vision work in bright and dim light.
  6. Run a full robot check before every practice match. Use a printed checklist: battery voltage > 12.5V, all bolts tight, wires secured, no frayed cables, code version matches the plan, controller connected, and emergency stop works. Sign and date it.
  7. Practice pit repairs with a timer. Pick a common failure (belt snapped, motor dead, wire pulled). Give the pit crew 10 minutes to fix it. Time them, then review what took long. Repeat with different failures.
  8. Simulate match conditions during practice. Play crowd noise, have the drive team wear their gloves, and enforce the same time limits. This reduces first-match nerves and exposes weak spots in communication.
  9. Hold a pre-match briefing ritual. Five minutes before each match: check battery, check code, confirm role assignments, review the strategy for that specific alliance, and agree on who talks during the match. Keep it calm and short.
  10. Conduct a post-match debrief. Immediately after each match, spend 3 minutes: what scored, what broke, what confused the drive team. Write it down. Fix the top issue before the next match.
  11. Build a pit checklist for competition day. Include: table setup, tools laid out, spare parts organized, battery charging station, laptop plugged in, safety gear visible, and a list of who is where at all times.
  12. Do a final full-system test the night before. Run the robot through an entire match sequence without stopping. Check all lights, sounds, and indicators. Confirm the robot fits in the sizing box and passes all inspection items.

Common Mistakes

  • Not testing with the actual competition battery. Voltage drops under load can cause brownouts. Always test with fully charged, competition-legal batteries.
  • Ignoring the human player role. The person who loads game pieces or interacts with the field needs just as much practice as the driver. They often get forgotten until match day.
  • Changing code the morning of the event. Any code change after the last full test is a risk. If you must change, retest the full match sequence, not just the changed part.
  • Skipping the safety check. A loose wire can short a motor controller and cost a match. The 2-minute safety check is never wasted time.
  • Letting the drive team skip practice. If the driver doesn’t show up, someone else drives, but then the backup needs practice time. Never let a first-time driver take the field without at least 5 practice matches.
  • Not writing things down. If you fix a jam and don’t record it, you’ll fix the same jam again next match. Log everything.

Tips

  • Color-code your tools and parts. Tape red on the drive team’s tools, blue on the pit crew’s. It stops arguments over who took what.
  • Use a laminated checklist with a dry-erase marker. You can reuse it every match and wipe it clean after each one.
  • Assign one person to watch the clock. In the pit, it’s easy to lose track. The pit crew lead should have an alarm set for 5 minutes before match call.
  • Practice with a different driver order. If the rules allow, occasionally swap driver and operator to build flexibility. It also helps backups stay sharp.
  • Record your practice matches on a phone. Review the video the same day. You’ll spot positioning mistakes that nobody noticed live.
  • Bring snacks and water for the whole team. Hungry people make mistakes. Schedule a 10-minute break every 2 hours.

Troubleshooting

Robot won’t turn on. Check the battery voltage first. If it’s below 12V, swap it. If voltage is fine, check the main breaker and all power connections. Look for a tripped fuse or a loose Anderson connector.

Code upload fails. Check the USB cable and port. Restart the programming software. If the robot has a wireless module, try a wired connection. Make sure the robot is powered on before uploading.

Motor is weak or jerky. Check for a damaged gear or a loose set screw on the motor shaft. Also check the motor controller’s current limit settings. Test the motor with a known-good controller to isolate the problem.

Sensor reads wrong values. First, check the wiring for a short or loose pin. Then re-calibrate the sensor per the manufacturer’s instructions. Test it on a flat surface with known distances. If it still fails, swap in a spare sensor.

Drive team can’t hear each other. If you use headsets, check batteries and pairing. If you don’t use headsets, agree on simple hand signals for the most common calls (go, stop, intake, shoot). Practice them until they’re automatic.

Robot fails inspection. Read the inspection sheet before you arrive. Common failures: sharp edges, battery not secured, wires exposed, robot too large. Fix these at the pit table before you queue up.

Frequently Asked Questions

How many practice matches should we run before competition? Aim for at least 15 full-length practice matches. That’s enough to expose most mechanical and programming issues and to build drive team rhythm.

What if our backup driver never gets practice time? Schedule one practice session per week dedicated to backups. Run the same drills but with the backup driver and operator. They need at least 5 full matches to be competent.

Should we bring our own field elements? If possible, yes. Even simple cardboard targets or tape lines help. If you can’t, use the practice field at the event early in the day.

How do we decide who drives? Run a timed obstacle course and a scoring drill. Let each candidate try twice. Pick the one with the most consistent scores, not the fastest single run. Also consider who communicates well with the operator.

What should be in our spare parts kit? At minimum: 2 spare motors, 4 spare gears of each size you use, 10 feet of wire, 20 zip ties, 10 screws of each common size, 2 spare belts, a soldering iron, and a multimeter.

How early should we arrive on competition day? At least 90 minutes before your first match. That gives you time to set up the pit, charge batteries, do a full robot check, and walk the field once.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.