How to Measure Your Shoe Size at Home
This guide shows you how to measure your foot length and width at home so you can find your correct shoe size, whether you’re buying online or in a store. You’ll need a few simple household items, and by following the steps below you’ll get measurements you can compare to any brand’s size chart.
What You’ll Need
- A piece of paper larger than your foot (printer paper works for most adults)
- A pencil or pen
- A ruler or tape measure (preferably one with millimeters)
- A wall or flat vertical surface
- A chair (optional, for balance)
- Socks you plan to wear with the shoes (optional but recommended)
Step-by-Step
- Prepare the area: Place the paper on a hard, flat floor against a wall. Make sure it doesn’t slide—tape it down if needed.
- Put on your socks: If you’ll wear socks with the shoes, put on a similar pair now. This adds a few millimeters that matter for fit.
- Stand on the paper: Stand with your heel lightly touching the wall. Keep your weight evenly on both feet—don’t lean forward or back.
- Mark your heel: Have someone (or use a chair for balance) trace a line at the very back of your heel where it touches the wall. Alternatively, you can mark where the wall meets the paper.
- Mark your longest toe: While still standing, place a pencil vertically against the tip of your longest toe (usually the big toe, but not always) and draw a small line on the paper. Keep the pencil straight up and down, not angled.
- Measure the length: Use the ruler to measure the distance between the heel line and the toe line in centimeters (or inches). Write this number down.
- Measure the width: Wrap the tape measure around the widest part of your foot (usually across the ball, just behind the toes) while standing. Note the circumference in centimeters. Alternatively, trace the outline of your foot and measure the widest point across the outline.
- Repeat for the other foot: Feet are often slightly different sizes. Repeat steps 3–7 for your other foot and use the larger measurement when choosing a size.
- Convert to shoe size: Use a shoe size chart (available from most shoe brands or online) to convert your foot length in centimeters to your US, UK, or EU size. For width, compare your circumference to the brand’s width guide (e.g., B, D, EE).
- Test the fit: If you already have shoes, try them on with the same socks. There should be about a thumb’s width (roughly 1 cm) of space between your longest toe and the end of the shoe. Your heel should not slip when you walk.
Common Mistakes
- Measuring while sitting: Your feet spread and lengthen when you stand. Always measure standing with full weight on the foot.
- Measuring only one foot: Most people have one foot larger than the other. Always measure both and go with the larger.
- Using a flexible tape that bends: When measuring length, a rigid ruler is more accurate. A soft tape can curve and give a wrong reading.
- Ignoring width: Two people with the same foot length can need different widths. A too-narrow shoe can cause pain and blisters even if the length is correct.
- Measuring at the wrong time of day: Feet swell during the day, so measuring in the morning may give a size that’s too small. Measure in the late afternoon or evening.
- Rounding down: If your measurement is between sizes, round up to the next half size, not down. It’s easier to add an insole than to stretch a too-small shoe.
Tips
- Measure both feet at the end of the day when they are at their largest—this helps avoid buying shoes that become tight after a few hours of wear.
- If you’re between sizes, consider the type of shoe: for running shoes, go up half a size to allow for foot swelling; for dress shoes, you may prefer a snugger fit.
- Use the same socks you plan to wear. Thick hiking socks add several millimeters compared to thin dress socks.
- When tracing your foot, keep the pencil perpendicular to the floor. Angling it inward will make the outline smaller than your actual foot.
- Check the brand’s specific size chart—sizes vary between brands and even between models of the same brand. A size 9 in one line may be an 8.5 in another.
- If you have access to a Brannock device (the metal foot-measuring tool in many shoe stores), use it as a cross-check, but remember it measures length and width separately, and your foot may still differ from the device’s assumptions.
Troubleshooting
My measurements seem too large/small compared to my usual size. This is common because brand sizing varies. Use your measured length (in cm) and the brand’s chart, not your memory of a size from another brand. If your measurement is a full size off from what you normally wear, double-check your technique—especially that you were standing and that the pencil was vertical.
I can’t tell which toe is longest. Look at your foot from above and find the toe that extends farthest forward. For some people it’s the second toe. Use that one for the length measurement.
My two feet measure different sizes. That’s normal. Use the larger foot’s measurement for buying shoes. If the difference is more than a full size, you may need to buy two different sizes (some brands offer split sizing) or choose a style that accommodates both.
The width measurement seems confusing. Width is usually given as a letter (B = narrow, D = medium/standard, EE = wide, etc.). If you can’t find your circumference on a chart, a simple rule: if the ball of your foot is wider than the outline of the shoe’s sole, you need a wide width.
I measured at home but the shoes still don’t fit. Home measurements give a good starting point, but shoe construction, materials, and last shape all affect fit. Always check the return policy when buying online, and try shoes on at home on carpet to avoid scuffing.
Frequently Asked Questions
How often should I measure my feet?
Feet can change size over time due to aging, weight changes, pregnancy, or medical conditions. It’s a good idea to measure your feet every time you buy new shoes, especially if it’s been more than a year since your last measurement.
Can I measure my foot with a ruler without tracing?
Yes, but tracing is more accurate because it captures the full shape. If you measure directly with a ruler, make sure you’re standing and that the ruler is flat against the floor, not angled.
What is the difference between US, UK, and EU shoe sizes?
US and UK sizes are based on different length units (US men’s and women’s sizes differ, and UK sizes are typically one size smaller than US men’s). EU sizes are based on the Paris point (2/3 cm per size). Always convert using a reliable chart.
Should I buy shoes a half size larger if I’m between sizes?
Generally, yes. A slightly larger shoe can be adjusted with insoles or thicker socks, while a too-small shoe can cause blisters, corns, and long-term foot problems. For athletic shoes, going up half a size is often recommended.
How do I know if I need a wide width?
If your foot width measurement is larger than the standard width for your length (most charts show this), or if you often feel that shoes are too tight across the ball of your foot, you likely need a wide width. Look for shoes labeled ‘W’ or ‘EE’.
Does foot size change during the day?
Yes. Feet can swell by up to 5% by the end of the day due to gravity and activity. That’s why measuring in the evening is recommended—it gives you the largest size your feet will be during normal wear.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.