SmartThings Routines: Step-by-Step Setup Guide
This guide walks you through creating SmartThings Routines and Automations, so your compatible lights, plugs, sensors, and other devices can respond automatically to triggers like time, motion, or device status. You’ll learn how to build a routine from scratch, add conditions, and troubleshoot common issues.
What You’ll Need
- A Samsung SmartThings account and the SmartThings app (iOS or Android) installed and logged in.
- A SmartThings Hub (V2 or V3) or a compatible Samsung SmartThings Hub-enabled device (like certain Samsung TVs or monitors).
- At least one SmartThings-compatible device already added and working in the app (e.g., smart bulb, plug, motion sensor, contact sensor).
- Reliable Wi-Fi and power for your hub and devices.
Step-by-Step
- Open the SmartThings app on your phone and tap the Automations tab at the bottom of the screen (it looks like a play button or a circle with a checkmark, depending on your app version).
- Tap the + (plus) icon in the top-right corner, then select Routine from the menu that appears. (If you see “Add Automation” instead, tap that – it’s the same thing.)
- Give your routine a clear name – for example, “Good Morning” or “Motion Lights.” Tap Next or Add to continue.
- Set the “If” (trigger) condition. Tap Add condition and choose what starts the routine:
- Time – set a specific time of day (sunrise/sunset also available).
- Device status – choose a device and its state (e.g., motion sensor detects motion, door opens, button pressed).
- Device mode – trigger when the home mode changes (Home, Away, Night).
- Routine trigger – trigger from another routine (if supported).
For a time-based routine, pick the time and days of the week. For device status, select the device and the specific state (e.g., “motion detected”). Tap Done.
- Add “Then” (action) steps. Tap Add action and choose what happens when the trigger fires:
- Device control – select a device and set its state (on/off, brightness, color, volume, etc.).
- Scene – run an existing scene (a group of device states).
- Delay – wait a set amount of time before the next action.
- Notify – send a notification to your phone.
- Home mode – change the home mode (e.g., to Away).
For example, to turn on a light: tap Device control, choose the light, set it to On, and optionally adjust brightness. Tap Done. You can add multiple actions – they will run in the order listed.
- Add “While” conditions (optional). If you want the routine to only run under certain circumstances, tap Add condition under the “While” section. For example, “only if the front door is closed” or “only when home mode is Home.” These are additional checks that must be true when the trigger fires.
- Review and save. Tap Save (or the checkmark) in the top-right. Your routine is now active. You’ll see it listed under the Automations tab.
- Test it. Trigger the condition manually (e.g., walk in front of the motion sensor) and watch if the actions run. If not, check the troubleshooting section below.
Common Mistakes
- Forgetting to set the “While” condition correctly. If you add a “While” condition, the routine only runs when that condition is true. If you don’t want any extra checks, leave that section empty.
- Using a device that is offline. If a device is unreachable, the routine may fail silently. Check the device status in the app.
- Not understanding “Device status” triggers. For motion sensors, “Motion detected” is the trigger. For contact sensors, “Open” or “Closed” is the state. Make sure you pick the right one.
- Creating a routine that triggers on a device state that is already true. For example, if you set a trigger to “When motion sensor detects motion” and the sensor is already detecting motion, the routine may not fire until the state changes (motion stops, then starts again).
- Overlapping routines. If two routines try to control the same device at the same time, they may conflict. Review your other routines to avoid clashes.
Tips
- Use sunrise/sunset as a time trigger for outdoor lights – it adapts to the season automatically.
- Combine multiple triggers with “and” logic by adding more conditions under the “If” section. For example, “If time is 7 AM AND motion detected.”
- Use delays to create sequences, like turning on a fan 5 minutes after a sensor detects motion.
- Name your routines clearly and consistently – it helps when you have many.
- Test routines immediately after creating them to catch issues early.
- Use the “Notify” action to get alerts when a sensor triggers – useful for security or monitoring.
Troubleshooting
Routine doesn’t run at all.
- Check that the routine is enabled (toggle is on) in the Automations tab.
- Verify the trigger device is online and reporting status. Open the device in the app and see if it shows the correct state.
- If using a time trigger, check the time zone in the app settings – it must match your location.
- Make sure the “While” conditions are met. If you have a condition like “While home mode is Home,” and your mode is Away, the routine won’t run.
Routine runs but actions don’t happen.
- Check that the action device is online and not in a “disabled” state.
- If you set a brightness or color, ensure the device supports those features.
- For delay actions, wait the full delay time – it may just be slow.
Routine runs but only partially.
- Some devices may not support all commands. Try simplifying the action to just “On” and see if that works.
- If you have multiple actions, test them individually by creating a temporary routine with one action.
Routine triggers too often or not often enough.
- For motion sensors, there is often a cooldown period. Check the sensor’s settings in the app.
- If you want a routine to run only once per day, add a condition like “While time is between 7 AM and 8 AM” or use the “Only once” option if available.
Frequently Asked Questions
Can I create a routine that runs when I arrive home?
Yes. Use the “Device status” trigger and select your phone’s location (if you have location permissions enabled) or use a smart lock or presence sensor. Choose “Arrives” as the state.
How do I make a routine run only on weekdays?
When setting a time trigger, tap on the days of the week and deselect Saturday and Sunday (or select only Mon-Fri).
Can I control multiple devices with one routine?
Absolutely. Add multiple actions under “Then” – each action can control a different device.
What’s the difference between a Routine and a Scene?
A Scene is a set of device states that you can manually activate or use in a routine. A Routine is a full automation with triggers and actions. You can run a Scene from within a Routine.
Can I use voice assistants like Alexa or Google Assistant with SmartThings routines?
Yes, if you have linked your SmartThings account to those assistants. You can then trigger routines by voice, but the routine itself must be created in the SmartThings app.
Why is my routine not showing up on my old SmartThings app?
Make sure your app is updated to the latest version. Some older versions have a different layout – look for “SmartApps” or “Automations” in the menu. If you’re on the classic app, consider migrating to the new app.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.