Cyberpunk 2077 PS5 Pro Display and Performance Settings

Updated 5 November 2026 · Standard formula, shown below

These settings help you balance image quality, smooth motion, and responsiveness in Cyberpunk 2077 on PS5 Pro. You’ll need a PS5 Pro, an up-to-date game, and a display connected by HDMI; the best choice depends on whether you value visual detail or frame rate more.

What You’ll Need

A PS5 Pro with Cyberpunk 2077 installed and updated.
An HDMI display. A 4K HDR television or monitor with HDMI 2.1, 120 Hz support, and VRR gives you the widest set of options, but is not required.
The display’s remote or controls, if you need to enable its Game Mode, HDR, or VRR features.

Step-by-Step

Check the physical connection and display capabilities. Connect the console directly to a compatible HDMI port on the TV or monitor. If you use a receiver or soundbar between them, it must pass through the resolution, refresh rate, HDR, and VRR features you want. Check the display’s manual for which HDMI port supports 4K at 120 Hz and VRR; not every port necessarily does.
Enable the display’s gaming features. Select the HDMI input connected to the PS5 Pro, then turn on Game Mode or the display’s equivalent low-latency mode. If available, enable HDMI enhanced format, 4K 120 Hz, and VRR for that input. Names differ by manufacturer. Game Mode may change picture processing, so adjust brightness or picture preferences afterward without turning off the low-latency mode.
Set up the PS5 Pro’s video output. On the console, open Settings > Screen and Video > Video Output. Set Resolution to Automatic initially, and leave 120 Hz Output and VRR on Automatic if the options are available. Set HDR to On When Supported rather than forcing it for games that do not support HDR. The screen should report which formats the connected display accepts.
Calibrate HDR at the console and in the game. If your display supports HDR, use Settings > Screen and Video > Video Output > Adjust HDR and follow the on-screen pattern instructions in your normal viewing environment. Then launch Cyberpunk 2077 and open Settings > Video. If an HDR calibration option is shown, adjust it while looking at its test image; avoid copying another screen’s values, since panel brightness and tone mapping vary. If the image looks washed out, confirm the display is in HDR mode and that HDR is enabled only when supported.
Choose a graphics mode in Cyberpunk 2077. Open the game’s Settings > Video menu and look for its graphics-mode options. On PS5 Pro, select Ray Tracing Pro for the most extensive ray-tracing effects and a more cinematic image, with a lower frame-rate target. Choose Performance if smooth, responsive play matters more than the fullest ray-tracing effects. If the game offers another ray-tracing or balanced mode on your installation, read the in-game description and compare it; available modes can vary with game updates and display capabilities.
Use the right display mode for the selected priority. For a 120 Hz screen, keep the PS5’s 120 Hz Output setting on Automatic and use the display’s supported 120 Hz input mode. This allows the game to use compatible high-refresh features where available; it does not mean every mode runs at 120 frames per second. For a 60 Hz display, leave 120 Hz Output on Automatic and choose the game mode you prefer. VRR can help reduce visible tearing or unevenness when the game’s frame rate varies, but only if the display supports it and the feature is enabled on both devices.
Check image framing and readability. In the game’s video settings, adjust the safe-zone or interface-area setting if interface elements sit too close to the edges. On the PS5, use Settings > Screen and Video > Screen options if the console image itself does not fit. Set the display’s sharpness conservatively; excessive sharpening can add halos and noise. Use the game’s brightness setting to make dark scenes visible without turning blacks grey.
Test both modes in actual play. Load a familiar area with movement, combat, and bright lights. Compare the modes from the same viewpoint, then choose based on what you notice: Performance is generally the practical starting point for fast action, while Ray Tracing Pro prioritizes lighting and reflections. Revisit the choice if motion clarity, image stability, or input feel is more important than visual effects.

Common Mistakes

Expecting every mode to deliver 4K at 120 fps. Resolution, ray tracing, and frame rate involve trade-offs. A 120 Hz-capable display does not guarantee that a game mode renders at 120 fps.
Forcing HDR or changing several HDR controls at once. Use HDR when supported, calibrate the console first, and then tune the game. Forcing HDR on unsupported content can make colors look wrong.
Assuming any HDMI cable, port, or receiver supports every feature. Check the specific port and equipment specifications. A connection can work at 4K while failing to pass 120 Hz or VRR.
Judging performance from a menu or a single scene. Frame rate and effects can vary between gameplay situations. Compare the same areas and remember that display processing can affect perceived smoothness.
Using another person’s brightness values. Display technology, room lighting, and HDR behavior differ. Calibrate using your own screen’s patterns and in-game image.

Tips

Start with Performance if you play shooters, drive often, or are sensitive to uneven motion. Try Ray Tracing Pro when exploring or prioritizing lighting and visual detail.
Use VRR when both the screen and console report support. Keep it on Automatic rather than forcing unsupported formats.
Make one change at a time. This makes it easier to tell whether a picture or responsiveness improvement came from the game mode, HDR, or display processing.
Turn off extra motion smoothing on the TV if it adds a soap-opera look or noticeable artifacts; the display’s Game Mode is usually the better starting point for console play.
After a game update, revisit its Video menu. Updates may adjust options or how a mode is presented.

Troubleshooting

A 120 Hz or VRR option is missing: Check that the display supports the feature, the correct HDMI port is in use, and any enhanced-format setting is enabled for that input. Connect the PS5 Pro directly to the display to rule out a receiver or adapter. Reopen Settings > Screen and Video > Video Output after reconnecting.

The picture goes black or flickers: Turn off 120 Hz Output or VRR temporarily, then test again. Reseat the HDMI cable and try another certified cable or compatible HDMI port. If the issue only occurs through an AV receiver, check its passthrough settings or connect the console directly.

HDR looks dim, grey, or oversaturated: Confirm the TV has entered HDR mode, use On When Supported, and redo the PS5 HDR adjustment. Recheck the game’s HDR controls afterward. If the display’s Game Mode disables some processing, use its own HDR picture controls rather than changing several console settings.

Performance feels uneven: Confirm the game is set to the intended graphics mode and that the display is in Game Mode. If VRR is supported, enable it on both the display and PS5. Compare Performance mode, and test a different area before concluding there is a persistent issue.

The image is cropped or interface text is hard to see: Adjust the game’s safe area and the console’s screen-area setting. If only the game interface is affected, change the in-game setting rather than zooming the entire display image.

Frequently Asked Questions

What is the best Cyberpunk 2077 mode on PS5 Pro?
Performance is a good starting point for smoother motion and responsiveness. Ray Tracing Pro is the better choice if you prefer stronger ray-traced visuals and accept a lower frame-rate target.

Do I need a 4K 120 Hz TV?
No. The game works with a standard HDMI display. A 4K 120 Hz screen with VRR can expose more display features, but it is not required to play.

Does a 120 Hz TV make the game run at 120 fps?
No. It allows the display to accept higher-refresh output, but the game’s actual frame rate depends on its mode and performance.

Should I turn on VRR?
If your display supports VRR, enable it on the display and leave the PS5 setting on Automatic. If you see flicker or compatibility problems, turn it off and compare.

Should HDR be on all the time?
Use On When Supported. Calibrate HDR on the PS5 and in the game if its HDR controls are available; forcing HDR for all content can produce inaccurate results.

Why does my display show 60 Hz even though it supports 120 Hz?
Check the HDMI port, cable, display input mode, and any receiver passthrough. Also confirm 120 Hz Output is set to Automatic and that the current game mode supports the relevant output.

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.