How to Choose CPUs and Accelerators for AI Inference
This guide helps you pick the right CPUs and accelerators (GPUs, NPUs, and other specialized hardware) for an AI inference server. You’ll learn what to consider based on your model type, latency requirements, and budget, and end with a clear selection strategy.
What You’ll Need
- A clear understanding of your AI workload: model type (e.g., transformer, CNN, LSTM), input size, and expected request rate.
- Knowledge of your latency target (e.g., p95 response time) and throughput needs (requests per second).
- Familiarity with your existing software stack (PyTorch, TensorFlow, ONNX Runtime, etc.) and whether it supports the accelerators you’re considering.
- A budget range for both initial hardware and ongoing power/cooling costs.
Step-by-Step
- Profile your model’s inference characteristics. Measure the model’s size (parameters), compute intensity (FLOPs per inference), memory footprint, and whether it’s memory-bound or compute-bound. Use profiling tools like PyTorch’s profiler or NVIDIA’s Nsight to get these numbers.
- Determine your performance targets. Define the maximum acceptable latency (e.g., 50ms per request) and the required throughput (e.g., 100 requests per second). Also note if you need batching (processing multiple inputs at once) to improve efficiency.
- Check your software compatibility. Verify that your inference framework and model (especially if using custom ops) support the accelerators you’re considering. For example, if you use TensorRT, you’re limited to NVIDIA GPUs; if you use OpenVINO, it supports Intel CPUs, GPUs, and VPUs.
- Evaluate CPU options. For low-latency, low-throughput workloads (e.g., a small model serving a few requests per second), a modern server CPU with high single-thread performance and AVX-512 or AMX instructions may suffice. Look at Intel Xeon Scalable or AMD EPYC processors with high base clocks and enough cores for concurrent requests.
- Consider GPU accelerators. For most deep learning inference, especially with transformers or large CNNs, a GPU like NVIDIA A10, L4, or A100 offers high throughput and low latency. Choose based on memory capacity (e.g., 24GB for L4 vs. 80GB for A100) and compute power (TFLOPS).
- Explore specialized accelerators. For edge or high-efficiency scenarios, consider NPUs (e.g., Google Coral, Intel Movidius) or FPGAs. These offer lower power consumption but may require more integration effort and have less software maturity.
- Benchmark with representative workloads. Use your actual model and data to test candidate hardware. Many cloud providers offer free trial instances; run your inference server and measure latency, throughput, and power draw.
- Consider scalability and power. Plan for future growth. If you expect to double your traffic, ensure you can add more accelerators or scale out across servers. Also factor in power and cooling costs; a GPU server can draw 1kW or more.
- Calculate total cost of ownership (TCO). Include hardware purchase or cloud rental, power, cooling, maintenance, and software licensing. A cheaper accelerator with higher power draw may cost more in the long run.
- Make your choice and validate. Select the hardware that meets your performance targets at the lowest TCO. Deploy a pilot, run load tests, and monitor real-world performance to confirm it meets expectations.
Common Mistakes
- Ignoring memory bandwidth. Inference is often memory-bound; a GPU with high compute but insufficient memory bandwidth can underperform.
- Overlooking batching. Some accelerators excel with large batches but have poor single-request latency. If your workload is real-time, you need low latency, not just high throughput.
- Assuming CPU-only is always cheaper. For heavy workloads, a GPU can serve many more requests per dollar despite higher upfront cost.
- Forgetting about software optimization. Even the best hardware won’t help if your model isn’t optimized (e.g., quantization, pruning).
- Not testing with real traffic. Synthetic benchmarks may not reflect your actual request patterns and model behavior.
Tips
- Use quantization (e.g., INT8) to reduce memory and compute requirements, often with minimal accuracy loss.
- Consider using a model server like Triton or TorchServe to manage batching and hardware utilization.
- For multi-tenant workloads, look for accelerators with good virtualization support (e.g., NVIDIA MIG).
- Keep an eye on emerging accelerators like Intel Gaudi or AWS Inferentia, which offer competitive performance for specific models.
- If you’re on the cloud, start with a small instance and scale out; you can always upgrade later.
Troubleshooting
- High latency despite powerful hardware: Check for network bottlenecks, inefficient batching, or CPU bottlenecks in preprocessing. Use profiling to identify the slow stage.
- Accelerator not utilized: Ensure your framework is using the accelerator (e.g., set device to cuda). Look for CPU-bound data loading that starves the GPU.
- Out of memory errors: Reduce batch size, use gradient checkpointing (if training), or switch to a model with smaller memory footprint. For inference, consider quantization.
- Poor performance with small batches: Some accelerators have high fixed overhead; if your workload is low-latency, consider a CPU or a smaller GPU.
- Software crashes or incompatibility: Check driver and framework versions. Update to the latest stable releases and consult the accelerator’s compatibility matrix.
Frequently Asked Questions
Can I use a CPU for AI inference?
Yes, CPUs can handle inference, especially for small models or low throughput. They are easier to integrate and have lower power draw, but they generally offer lower throughput than GPUs for deep learning.
What’s the difference between GPU and NPU for inference?
GPUs are general-purpose parallel processors that excel at matrix operations, while NPUs are specialized for neural network workloads, offering higher efficiency per watt but less flexibility. NPUs are common in edge devices.
How much GPU memory do I need for inference?
It depends on model size and batch size. A rule of thumb: the memory should be at least 2-3 times the model size (in bytes) to accommodate activations and overhead. For a 1GB model, 4GB GPU memory is a safe start.
Should I choose a cloud instance or buy my own hardware?
Cloud is flexible and good for variable workloads, but can be costly at scale. On-premises hardware offers lower per-request cost if you have sustained high usage, but requires upfront investment and maintenance.
How do I benchmark an accelerator for my model?
Use your actual model and a representative dataset. Run inference with a realistic batch size and measure latency, throughput, and power. Tools like NVIDIA’s DLProf or TensorFlow’s profiler can help.
What is the best accelerator for transformer models?
NVIDIA GPUs are currently the most mature for transformers, especially with TensorRT optimization. For high efficiency, consider dedicated inference chips like AWS Inferentia or Google TPU, but check software support.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.