Back Up a NASync DXP6800 Ultra: Cloud & NAS Guide
This guide walks you through backing up your NASync DXP6800 Ultra to a cloud service or another NAS. You’ll learn the essential preparation steps, two reliable backup methods, and how to troubleshoot common issues. By the end, you’ll have a solid backup strategy in place to protect your data from drive failure, accidental deletion, or a catastrophic event like a fire or theft.
What You’ll Need
- Your NASync DXP6800 Ultra powered on and accessible via its web interface (usually by entering its IP address in a browser).
- Administrator credentials for the NAS.
- For cloud backup: an active account with a supported cloud provider (e.g., Backblaze B2, Amazon S3, Wasabi, or Microsoft Azure).
- For NAS-to-NAS backup: a second NAS device (any brand that supports rsync or SMB) with sufficient free storage.
- A stable network connection—wired Ethernet is recommended for large transfers.
- Optional but recommended: a UPS (uninterruptible power supply) to prevent interruptions during long backups.
Step-by-Step
Part 1: Prepare Your NAS
- Update the operating system. Log into the NAS web interface, go to Settings > System Update, and install any available updates. A current OS ensures compatibility with backup tools.
- Create a backup user (optional but recommended). Go to Control Panel > Users and create a dedicated user with read access to the folders you want to back up. This avoids using your admin account for backup tasks.
- Decide what to back up. Identify the shared folders (e.g., /home, /data, /photos) that contain critical data. You may not need to back up the entire volume if some folders are disposable.
Part 2: Backup to a Cloud Service
- Open the backup app. From the main menu, launch Hyper Backup (or the built-in backup tool). If it’s not installed, install it from the package center.
- Select “Cloud” as the destination. Click Create > Backup Task and choose Cloud.
- Choose your cloud provider. Pick from the list (e.g., Backblaze B2, Amazon S3, S3-compatible, Microsoft Azure, etc.). Enter your account credentials and, if required, a bucket or container name.
- Select folders to back up. Check the boxes next to the shared folders you want to include. You can also exclude subfolders using the filter options.
- Set a schedule. Choose when the backup should run—daily, weekly, or manually. For critical data, a daily schedule is recommended.
- Enable backup rotation (optional). In the Rotation section, you can set how many versions to keep. For example, keep 7 daily versions and 4 weekly versions to balance storage and recovery options.
- Finish and run. Review the summary, click Finish, and then click Back Up Now to start the first backup. The initial transfer may take a while depending on data size and upload speed.
Part 3: Backup to Another NAS
- Open the backup app. Launch Hyper Backup on your DXP6800 Ultra.
- Select “Remote NAS” as the destination. Click Create > Backup Task and choose Remote NAS.
- Enter the destination NAS details. Provide the IP address or hostname of the second NAS, the protocol (usually rsync or SMB), and the credentials for an account on that NAS that has write permissions to the target folder.
- Choose the target folder. On the remote NAS, select or create a folder where the backup data will be stored.
- Select folders to back up. As with cloud backup, choose the local folders you want to include.
- Set a schedule and rotation. Configure the frequency and version retention as described in the cloud backup steps.
- Run the backup. Click Finish and then Back Up Now to start the initial transfer.
Common Mistakes
- Not enabling versioning. Without version rotation, a ransomware attack or accidental overwrite will corrupt your backup permanently. Always enable at least a few versions.
- Using the same credentials for backup and everyday use. A compromised admin account can delete backups. Use a separate backup user with limited permissions.
- Ignoring upload bandwidth. Cloud backups can saturate your internet connection, slowing down other activities. Schedule backups during off-peak hours.
- Backing up to a NAS that is in the same room. If a fire or flood destroys both devices, your backup is gone. For true disaster recovery, the second NAS should be at a different location.
- Forgetting to test restores. A backup that cannot be restored is worthless. Periodically test a file restore to ensure the process works.
Tips
- Use a hybrid approach. Back up critical files to the cloud and a second NAS. This covers both ransomware (cloud keeps old versions) and local disasters (offsite NAS).
- Encrypt your backups. In Hyper Backup, enable encryption before the first backup. This protects your data if the cloud provider is breached or the remote NAS is stolen.
- Monitor backup logs. Set up email notifications for backup failures so you know immediately when something goes wrong.
- Start with a small test folder. Before backing up everything, run a test with a few files to verify the configuration is correct.
- Consider using a backup versioning scheme. For example, keep 7 daily, 4 weekly, and 12 monthly versions. This balances storage cost with recovery options.
Troubleshooting
- Backup fails with a connection error. Check that the destination NAS is powered on and reachable (ping the IP). For cloud, verify your internet connection and that the cloud account credentials are correct. Also, ensure the cloud provider’s API is not down.
- Transfer is extremely slow. This is often due to network congestion or a slow internet upload speed. Try connecting both NAS devices via Ethernet, or schedule the backup during off-peak hours. For cloud, you can enable data compression (if available) to reduce transfer size.
- Backup completes but some files are skipped. Check the backup log for “permission denied” errors. The backup user may not have read access to all folders. Grant read permissions to the backup user.
- Cannot connect to the remote NAS via rsync. Ensure the remote NAS has rsync service enabled (usually in its own backup settings). Firewall rules on either NAS may block the port (default 873).
- Cloud backup fails with “bucket not found”. You may have entered the bucket name incorrectly, or the bucket is in a different region. Double-check the bucket name and region in your cloud provider’s console.
- Backup task disappears after a reboot. This is rare but can happen if the backup database is corrupted. Check the system log for errors and consider recreating the task.
Frequently Asked Questions
Can I back up to a USB drive instead of cloud or NAS?
Yes, Hyper Backup also supports local USB drives. The steps are similar: choose “Local Folder” or “USB” as the destination. However, USB drives are not recommended as the only backup because they are prone to failure and theft.
How long does the first backup take?
It depends on the amount of data and your upload speed. For example, 1 TB of data with a 100 Mbps upload speed will take roughly 22 hours. Subsequent backups are incremental and much faster.
Can I access my cloud backup files directly?
Yes, if you use a cloud provider like Backblaze B2 or S3, you can browse the files using the provider’s web console. However, the files may be in a proprietary format if you enabled encryption or deduplication. For easy access, you can also mount the backup as a network drive using the NAS’s built-in tools.
What happens if I delete a file locally after a backup?
If you have versioning enabled, the file will still exist in older versions of the backup. You can restore it from a previous version. If versioning is disabled, the file will be removed from the backup on the next run.
Is it safe to back up to a cloud provider that I don’t control?
Yes, as long as you enable encryption in Hyper Backup before the first backup. The encryption key is stored on your NAS, so the cloud provider cannot read your data. Be sure to keep a copy of the encryption key somewhere safe—if you lose it, you cannot restore your data.
Can I back up multiple NAS devices to the same cloud bucket?
Yes, but you should use different folder prefixes or separate buckets for each NAS to avoid file conflicts. Hyper Backup will create a unique folder structure for each task.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.