BeamNG.drive Multiplayer Server Cost: Full Guide
- Cost per player
- USD/mo
- Result
- Max players
- 16
- You entered
- Months hosted
- 1
- You entered
Running a BeamNG.drive multiplayer server typically costs between $10 and $60 per month, depending on your player count, hardware, and hosting provider. For a small group of friends (up to 8 players), you can often get away with a $10–$15 VPS, while a larger public server (32+ players) may need a dedicated machine costing $40–$60 monthly.
Formula
The total monthly cost is the base hosting fee (CPU, RAM, storage) plus any bandwidth or DDoS protection addons, plus a per‑player overhead for game files and network load. In symbols:
Total = CPU/memory fee + Bandwidth addon + (Max players × 0.5)
- CPU/memory fee – the base price for the virtual or dedicated server resources (USD/month).
- Bandwidth addon – extra cost if you need more than the included monthly traffic (USD/month).
- Max players – the maximum number of simultaneous players you want to support.
The $0.50 per player is a rough estimate for the extra RAM and disk I/O each connected client consumes. Real costs vary, but this gives a planning baseline.
Worked Example
Using the defaults from the calculator: 16 players, 1 month, $25 CPU/mem fee, $5 bandwidth addon.
- Per‑player overhead: 16 × 0.5 = $8
- Total = $25 + $5 + $8 = $38/month
- Cost per player = $38 ÷ 16 = $2.38/month
The calculator shows $38.00 and $2.38, matching the example.
Why BeamNG Multiplayer Needs a Server
BeamNG.drive is a soft‑body physics simulation game. Unlike typical racing games, every car is a network of thousands of nodes that must stay in sync. The official multiplayer mod (BeamMP) relays position, velocity, and damage data between players. This is far more demanding than a typical FPS server because the server must constantly validate physics states. Consequently, you can’t run a 64‑player server on a $5 shared host; you need a CPU with strong single‑thread performance and enough RAM to hold the map and vehicle models.
Hosting Options and Their Costs
You have three main paths, each with different price points and trade‑offs:
- Self‑hosting (free) – Run the server on your own PC. Costs nothing extra beyond your electricity and internet, but only works if your upload speed (at least 10 Mbps) and CPU (modern quad‑core) can handle it. You also need to leave your PC on 24/7 if you want the server always available.
- VPS (Virtual Private Server) – A rented virtual machine from a provider like DigitalOcean, Linode, or Hetzner. Prices range from $10–$30/month for 4–8 GB RAM and 2–4 vCPUs. This is the sweet spot for 8–20 players. You must install and configure the server yourself, which takes about an hour.
- Game server provider – Companies that specialize in hosting BeamMP servers (e.g., Citadel Servers, GTXGaming). They offer one‑click installs and a control panel. Typical pricing: $15–$40/month for 10–30 slots. They handle updates and DDoS protection, but you pay a premium over a raw VPS.
How to Choose the Right Plan
Start with your expected player count and desired uptime. Then match that to hardware specs:
- 2–8 players – 2 vCPUs, 4 GB RAM, 20 GB SSD. A $10–$15 VPS or a budget game server plan works.
- 8–16 players – 4 vCPUs, 8 GB RAM, 40 GB SSD. Expect $20–$30/month.
- 16–32 players – 6–8 vCPUs, 12–16 GB RAM, 60+ GB SSD. Dedicated or high‑end VPS: $40–$60/month.
Also consider your region. If all players are in Europe, choose a European host to keep ping low. Check the provider’s policy on game server hosting – some cheap VPS plans forbid game servers in their terms of service.
Common Problems and Hidden Costs
The biggest surprise is bandwidth. BeamMP servers can use 100–200 GB per month for a small community. Most VPS plans include 1–2 TB, which is fine, but unlimited plans often have “fair use” caps. If you exceed them, you’ll get throttled or billed extra. Another hidden cost is DDoS protection. Public servers are often targeted; providers charge $5–$20/month for mitigation. Finally, don’t forget the time cost: setting up a VPS requires Linux basics, configuring the BeamMP server, and keeping it updated. If that’s not your thing, the extra $10/month for a managed game server is worth it.
Comparing Self‑Hosting vs. Paid Hosting
Self‑hosting is free but has real limitations. Your home IP is exposed, which invites DDoS attacks that can take down your entire home network. Your upload speed is usually asymmetric – you may have 500 Mbps download but only 20 Mbps upload, which caps out at around 8–10 players. Paid hosting solves both problems, but you lose the ability to mod the server as freely unless you pay for full file access (some providers restrict it). For a serious community, a $20–$30 VPS is the best balance of cost and control.
Frequently Asked Questions
Can I run a BeamNG server for free?
Yes, by hosting it on your own PC. You need a decent CPU (like an Intel i5 or AMD Ryzen 5), at least 8 GB RAM, and a stable internet connection with at least 10 Mbps upload. It works fine for a few friends, but you’ll have to leave your computer on and deal with port forwarding.
What is the cheapest paid option?
The cheapest reliable paid option is a low‑end VPS from a budget provider, often around $10–$12/month for 2 vCPUs and 4 GB RAM. That can handle up to 8 players. Avoid ultra‑cheap $3 VPSs – they usually have terrible CPU performance and insufficient RAM.
How many players can a 4‑core server handle?
A 4‑core server with 8 GB RAM can handle about 16 players in BeamMP, provided the CPU has good single‑thread speed (e.g., a modern Intel Core i5 or AMD Ryzen 5). Physics calculations are the bottleneck, so faster cores matter more than core count.
Does the official BeamNG multiplayer mod cost money?
No, BeamMP is free and open‑source. You only pay for the server hardware or hosting. The game itself must be purchased, but the multiplayer mod is free to download from its official site.
Why does my server lag with 10 players?
Lag usually comes from the server’s CPU being overloaded, not the network. Check if the CPU is at 100% in the task manager. If so, reduce the number of vehicles per player (each car adds physics load) or lower the physics tick rate in the server config. Also, ensure your upload bandwidth is above 10 Mbps.
Can I use a Minecraft server host for BeamNG?
Technically yes, if the host gives you full root access (like a VPS). However, most Minecraft-specific hosts restrict you to their control panel and won’t let you run arbitrary executables. It’s better to use a general VPS provider or a host that explicitly supports BeamMP.
Related
Formula used
in players | Max players | - | 16 | 2 in months | Months hosted | - | 1 | 1 in cpu_cost | CPU/mem cost ($/mo) | USD | 25 | 0 in bw_cost | Bandwidth addon ($/mo) | USD | 5 | 0 out total | Total monthly cost | USD | cpu_cost + bw_cost + (players * 0.5) | 2 out per_player | Cost per player | USD/mo | total / players | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.