HDMI ARC and eARC: What They Mean
HDMI ARC (Audio Return Channel) and eARC (enhanced Audio Return Channel) are features that let a single HDMI cable carry audio from your TV back to a soundbar or AV receiver, removing the need for a separate optical or analog audio cable. ARC, introduced in HDMI 1.4, supports compressed 5.1 surround sound; eARC, part of HDMI 2.1, adds support for lossless formats like Dolby TrueHD and DTS-HD Master Audio. If you are connecting a modern TV to a soundbar, eARC is the better choice when both devices support it, but ARC is still fine for most streaming and broadcast content.
What ARC Does and Why It Exists
Before ARC, getting sound from a TV to a separate audio system required two connections: one from the source (like a Blu-ray player) to the receiver for video and audio, and another from the TV’s optical output to the receiver for TV apps and over-the-air broadcasts. ARC simplified this by letting the HDMI cable that already carries video from the receiver to the TV also send audio back from the TV to the receiver. That single cable handles both directions, but it does have bandwidth limits.
ARC uses the same HDMI connection as standard video, but it reserves a small portion of the link for return audio. The practical result is that ARC can carry:
- Stereo PCM (uncompressed two-channel audio)
- Compressed 5.1 Dolby Digital and DTS (the same quality as optical cables)
- Some formats like Dolby Digital Plus, but often at reduced quality or with limitations depending on the TV
ARC cannot carry lossless formats like Dolby TrueHD or DTS-HD Master Audio, nor can it carry uncompressed multi-channel PCM. That is the main reason eARC was developed.
What eARC Adds
eARC, introduced with HDMI 2.1, dramatically increases the audio bandwidth of the return channel. While ARC operates at roughly 1 Mbps for audio, eARC can handle up to 37 Mbps. That extra capacity allows it to carry:
- Lossless Dolby TrueHD and DTS-HD Master Audio (the exact bit-for-bit tracks found on Blu-ray discs)
- Uncompressed 5.1 and 7.1 PCM audio
- Dolby Atmos and DTS:X object-based audio in their lossless forms
- Higher sample rates (up to 192 kHz) for high-resolution audio
In practice, eARC is most useful if you have a 4K Blu-ray player connected directly to the TV, or if you use a TV app that streams lossless audio (rare, but some services offer it). If your soundbar or receiver supports eARC, you get the full audio quality from any source connected to the TV.
How to Tell If Your Devices Support ARC or eARC
Look for the HDMI port labels on the back of your TV and soundbar. ARC ports are usually labeled “ARC” or “HDMI ARC.” eARC ports are labeled “eARC” or “HDMI eARC.” If a port is labeled only “ARC,” it does not support eARC. If it is labeled “eARC,” it is backward compatible with ARC, so an older device will still work, just at ARC bandwidth.
Also check the HDMI cable. For eARC, you need a cable that supports HDMI 2.1’s higher bandwidth (often labeled “Ultra High Speed” or “48Gbps”). Standard HDMI cables from a few years ago may not handle eARC reliably, though many will work at shorter lengths. If you get dropouts or no audio, try a certified Ultra High Speed cable.
Connecting and Setting Up ARC/eARC
Setting up ARC or eARC is straightforward, but there are a few steps to get right:
- Connect an HDMI cable from the TV’s ARC/eARC port to the soundbar or receiver’s ARC/eARC port. Do not use any other port.
- On the TV, enable the ARC or eARC setting. On many TVs it is under Settings → Sound → Audio Output, and you may need to select “HDMI ARC” or “eARC” as the output.
- On the soundbar or receiver, make sure the input is set to the ARC/eARC port (often labeled “TV” or “ARC”).
- If you have a separate source like a Blu-ray player, connect it to the TV (for eARC) or to the receiver (for traditional setup). For eARC to pass lossless audio, the source must be plugged into the TV, not the soundbar.
- Test with content known to have 5.1 or Atmos audio. Many streaming apps have a “Test” or “Info” screen that shows the audio format being played.
If you get no sound, try a different HDMI cable, check that both devices have ARC/eARC enabled, and make sure the TV’s audio output is not set to “PCM” if you want surround sound (PCM is fine for stereo, but for 5.1 you usually need “Bitstream” or “Auto”).
ARC vs. eARC: Which One Do You Need?
For most people, ARC is enough. Streaming services like Netflix, Disney+, and YouTube use Dolby Digital Plus or Dolby Atmos in a compressed form that ARC can carry (though Atmos via ARC is limited to the compressed version). If you only watch streaming and cable TV, ARC will give you full surround sound and even Atmos in many cases.
Choose eARC if you have any of these:
- A 4K Blu-ray player connected directly to the TV
- A gaming console that outputs uncompressed 7.1 PCM (like the PS5 or Xbox Series X)
- A soundbar or receiver that supports Dolby Atmos or DTS:X and you want the best possible quality
- A desire to future-proof your setup for when lossless streaming becomes more common
If you already have a soundbar with ARC and it sounds fine, there is no urgent need to upgrade. eARC only matters if you have content that actually uses lossless audio, and most streaming services do not.
Common Problems and Troubleshooting
ARC and eARC are convenient, but they can be finicky. Here are the most common issues and what to check:
- No sound at all: Check that the cable is plugged into the correct port (labeled ARC/eARC on both ends). Try a different cable, and make sure the TV’s audio output is set to “HDMI ARC” or “eARC.”
- Sound cuts out intermittently: This is often a cable bandwidth issue, especially with eARC. Try a shorter, certified Ultra High Speed cable.
- Only stereo sound, no surround: On the TV, change the audio output from “PCM” to “Bitstream” or “Auto.” Also check that the source device is set to output bitstream, not PCM.
- No Atmos: Make sure the content actually has Atmos (look for the logo in the app). Also check that the TV’s audio output is set to “Bitstream” or “Auto,” and that the soundbar is in the correct mode.
- eARC not working even though both devices support it: Some TVs require you to enable “eARC” in the sound settings; it is not always on by default. Also, some TVs only support eARC on one specific HDMI port.
If you have an older AV receiver that does not support eARC, you can still get lossless audio by connecting your Blu-ray player directly to the receiver and using a separate HDMI cable from the receiver’s output to the TV for video. That bypasses ARC entirely.
Frequently Asked Questions
Do I need an eARC soundbar if my TV only has ARC?
No. If your TV only has ARC, an eARC soundbar will still work via ARC, but you will not get the lossless audio benefits of eARC. The soundbar will fall back to ARC bandwidth, which is fine for streaming but not for lossless Blu-ray audio.
Can I use an optical cable instead of ARC?
Yes, optical cables carry the same compressed 5.1 formats as ARC (Dolby Digital and DTS), but they cannot carry Atmos or lossless audio. ARC also allows volume control from the TV remote and automatic input switching, which optical does not.
Does eARC require an HDMI 2.1 cable?
For full eARC bandwidth, yes, you need a cable that supports HDMI 2.1’s higher data rate, often marketed as “Ultra High Speed.” However, many standard high-speed HDMI cables (18Gbps) will work for eARC at shorter lengths, but it is not guaranteed.
Is ARC good enough for a soundbar?
For most soundbars, yes. Soundbars with a single subwoofer and a few drivers do not benefit much from lossless audio. ARC will give you full 5.1 surround sound for streaming and cable, which is what most people watch.
Why does my TV say “ARC” but no sound comes out?
Check that the HDMI cable is plugged into the ARC-labeled port on both the TV and the soundbar. Then go to TV settings and select “HDMI ARC” as the audio output. If that does not work, try a different cable or a different HDMI port on the TV (some TVs have only one ARC port).
Can I use an HDMI adapter to get eARC on an older TV?
There are external eARC adapters that convert an optical or HDMI ARC signal to eARC, but they only work if the source device outputs lossless audio over HDMI. They do not add eARC capability to a TV that lacks it; they just convert the signal format. In practice, they are rarely worth the cost.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.