ThisCalculator

Everyday

Weird 3D Printer Projects: Bidets to Telescopes

Updated · Standard formula, shown below

Filament cost 6.25 USD
Cost per hour
0.78 USD/hour
Result
Print time
8 hours
You entered
Filament weight
250 grams
You entered

This article answers what you can actually make with a portable 3D printer for a weekend project, from functional items like a travel bidet attachment to a fully working telescope mount. You’ll learn what’s realistic to print, what hardware you need to buy separately, and how to avoid the most common pitfalls.

Formula

The calculator works out the material cost of a print and the cost per hour of printing. The formula is:

Filament cost = (filament weight in grams / 1000) × price per kilogram

Cost per hour = filament cost / print time in hours

Where:

  • w = weight of filament used, in grams (g)
  • c = price of filament per kilogram, in your currency (USD, EUR, etc.)
  • t = total print time, in hours (h)

The result is the cost of the plastic alone. It does not include electricity, wear on the printer, or any non-printed parts.

Worked Example

Using the default values from the calculator: a print that takes 8 hours and uses 250 grams of filament, with filament priced at $25 per kilogram.

  1. Convert filament weight to kilograms: 250 g ÷ 1000 = 0.25 kg
  2. Multiply by price per kg: 0.25 × $25 = $6.25
  3. Cost per hour: $6.25 ÷ 8 = $0.78/hour

So the plastic for that weekend project costs about $6.25, or roughly $0.78 per hour of printing.

Why Print a Bidet or a Telescope?

Portable 3D printers (typically models under 10 kg that fold or fit in a backpack) have opened up a niche of “weird weekend projects” that are practical, funny, or both. A bidet attachment that screws onto a standard water bottle is a popular print because it’s small, uses less than 50 grams of filament, and solves a real travel problem. A telescope, on the other hand, is not fully printable — the lenses or mirrors must be purchased — but the entire mount, focuser, and even the tube can be printed, turning a $30 optics kit into a working scope.

These projects are possible because FDM (fused deposition modeling) printers can produce rigid, water-resistant parts from PLA, PETG, or ABS. The catch is that most functional prints need post-processing: sanding, sealing, or adding rubber gaskets. A printed bidet, for example, will leak if you don’t add an O-ring or use a threaded insert.

What You Can Print vs. What You Must Buy

Understanding the boundary between printable and non-printable parts is key to a successful weekend project.

  • Printable: brackets, mounts, gears, tubes, handles, cases, and structural frames.
  • Not printable (in most cases): lenses, mirrors, springs, screws, flexible seals, and anything that must be transparent or food-safe.

For a telescope, you’ll need to buy the primary mirror (for a reflector) or objective lens (for a refractor), an eyepiece, and possibly a diagonal mirror. For a bidet, you need a standard bottle thread adapter and a rubber washer. Many designs on popular model-sharing sites list the exact hardware required, so check the description before printing.

How to Choose a Project for Your Printer

Not every printer can handle every project. Here’s what to check before committing a weekend:

  1. Build volume: A telescope tube may be too large for a 20×20×20 cm print bed. Look for designs that split into segments that glue or screw together.
  2. Material compatibility: If the part will touch water (bidet) or sit in the sun (telescope outdoors), use PETG or ABS, not PLA, which deforms above 60°C and degrades in moisture.
  3. Layer height and precision: A telescope focuser needs smooth motion — print at 0.12 mm layer height for fine detail. A bidet nozzle can be printed at 0.2 mm.
  4. Print time: Most weekend projects take 6–15 hours total. If you have a single printer, plan for overnight prints.

If you’re new to printing, start with a simple project like a phone stand or a cable clip. A telescope is an advanced project that may require multiple iterations to get right.

Common Problems and How to Avoid Them

Even experienced makers hit issues with these projects. Here are the most frequent ones:

  • Leaks in the bidet: The threads may not seal perfectly. Solution: apply plumber’s tape or add a rubber gasket. Also, print with 100% infill for water-tightness.
  • Telescope wobble: Printed mounts flex more than metal ones. Solution: increase wall thickness to 4+ perimeters and use a sturdy tripod.
  • Warping: ABS and PETG can warp during printing. Solution: use a heated bed and an enclosure, or switch to PLA for non-critical parts.
  • Layer separation: If the print fails along layer lines, increase the nozzle temperature by 5–10°C and reduce cooling fan speed.

If a part fails, don’t reprint the whole thing. Many designs have individual STL files for each component, so you can reprint just the broken piece.

Costs and Time Estimates

Using the calculator above, you can estimate the filament cost. Here are typical values for weekend projects:

  • Bidet attachment: 30–60 grams, 2–4 hours, cost $0.75–$1.50 (at $25/kg)
  • Telescope mount (full): 500–800 grams, 15–25 hours, cost $12.50–$20
  • Phone macro lens adapter: 10–20 grams, 1–2 hours, cost $0.25–$0.50

Remember to add the cost of non-printed parts. A telescope mirror set can cost $30–$100, while a bottle adapter and O-ring cost under $5.

Safety and Practical Considerations

Safety is often overlooked in hobby projects. Here are the key points:

  • Food safety: Do not use printed parts for food or drink unless you use a food-safe filament and seal the surface. PLA is porous and can harbor bacteria.
  • Water contact: Printed parts are not inherently waterproof. Use 100% infill and coat with epoxy or polyurethane if needed.
  • Optical safety: Never point a telescope at the sun without a proper solar filter. A printed mount won’t protect your eyes.
  • Electrical safety: If your project includes wiring (e.g., a motorized focuser), ensure proper insulation and avoid overloading the printer’s power supply.

Also, be aware that PLA is biodegradable but not compostable in home bins; dispose of failed prints properly.

Frequently Asked Questions

Can I really print a working telescope?

Yes, but only the mechanical parts. The optics (mirrors or lenses) must be purchased. Many designs, like a “Dobsonian telescope,” use a printed tube and mount with a store-bought mirror. The result is fully functional for lunar and planetary observation, though not as sharp as a commercial telescope of similar cost.

Is a 3D-printed bidet safe to use?

For external use, yes, if you print with a water-safe material like PETG and seal the surface. Avoid PLA because it can absorb water and degrade. Also, use a fresh water bottle each time and clean the nozzle regularly. It is not a substitute for medical hygiene.

What is the best filament for outdoor projects?

PETG is the most reliable for outdoor use because it resists UV and moisture better than PLA and is easier to print than ABS. ASA is another good choice, with higher temperature resistance, but it requires a heated chamber to avoid warping.

How long does it take to print a telescope mount?

It depends on the design and your printer speed. A full mount can take 15–25 hours of print time, spread over a weekend. The tube itself may be printed in 2–4 segments of 3–5 hours each. Plan for a few extra hours for assembly and calibration.

Do I need a special 3D printer for these projects?

No, a standard FDM printer with a 20×20×20 cm build volume can handle most designs. For larger parts, you may need to split the model and glue pieces together. A heated bed is recommended for PETG and ABS, but not strictly required for PLA.

Why does my printed bidet leak?

Leaks usually come from the thread seal or porous infill. Ensure you print with at least 4 walls and 100% infill. Apply plumber’s tape to the threads before screwing onto the bottle. If it still leaks, coat the inside with a food-safe epoxy.

Related

Formula used
in t | Print time | hours | 8 | 0
in w | Filament weight | grams | 250 | 0
in c | Filament cost per kg | USD | 25 | 0
out cost | Filament cost | USD | (w / 1000) * c | 2
out pph | Cost per hour | USD/hour | ((w / 1000) * c) / t | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.