Fixed Backup Location Not Found? 6 Fixes
If you see a “Fixed backup location not found” error, it usually means your backup software can’t access the drive or folder you designated as the backup destination. The fix is to reconnect the drive, update the drive letter, or re-select the backup location in your software’s settings.
What Does This Error Mean?
Backup programs (like Windows File History, macOS Time Machine, or third-party tools) let you choose a “fixed” backup location—a specific external drive, network share, or internal partition. The software expects that location to be available every time it runs. When it’s not, you get an error like “Fixed backup location not found.”
This is different from a “backup failed” message, which might indicate a permission problem or a full disk. “Not found” specifically means the software can’t see the destination at all.
Why Does the Location Become “Not Found”?
Several common scenarios cause this:
- Drive is unplugged: External USB drives are often disconnected when not in use.
- Drive letter changed: Windows may assign a different letter to the drive after a reboot or if other devices were plugged in.
- Network share is offline: A NAS or shared folder on another computer may be asleep or disconnected.
- Drive is not mounted: On macOS, an external drive might not be mounted if it was ejected improperly.
- Drive failed or has a bad connection: A failing drive or a loose cable can make the drive invisible to the OS.
- Software settings corrupted: The backup program may have lost its saved path.
How to Fix It (Step-by-Step)
Try these in order, testing the backup after each step:
- Reconnect the drive: Unplug the USB cable, wait 10 seconds, and plug it back in. Try a different USB port if possible.
- Check if the drive appears in your OS: Open File Explorer (Windows) or Finder (macOS). If you see the drive, open it and confirm the backup folder exists.
- Assign a permanent drive letter (Windows): Right-click the Start button → Disk Management → right-click the drive’s partition → “Change Drive Letter and Paths” → assign a letter like E: or F:. This prevents future changes.
- Re-select the backup location: In your backup software, go to settings and choose the backup destination again. This updates the stored path.
- Restart the backup service: On Windows, open Services (services.msc), find “Windows Backup” or “File History,” right-click and restart. On macOS, restart Time Machine from System Settings.
- Check the drive’s health: If the drive still doesn’t appear, test it on another computer. If it fails there, the drive may be dead.
Preventing the Error in the Future
Once you’ve fixed it, take steps to avoid recurrence:
- Keep the drive plugged in: If it’s a desktop backup, leave the drive connected and powered on.
- Use a fixed drive letter: In Disk Management, assign a letter that’s unlikely to conflict (e.g., X:).
- Enable “always on” for network drives: On a NAS, disable sleep mode. On Windows, you can map a network drive and select “Reconnect at sign-in.”
- Schedule backups when the drive is present: Set backups to run at a time when you know the drive will be connected.
- Use a UPS for power failures: Power surges can corrupt the drive’s connection.
What If the Drive Is Not Recognized at All?
If the drive doesn’t show up in File Explorer or Disk Utility, it’s a hardware or driver issue:
- Try a different cable—many external drives use a USB-A to USB-B or USB-C cable that can fail.
- Plug the drive directly into the computer, not a hub.
- Check Device Manager (Windows) for yellow warning icons. If present, update the driver.
- On macOS, open Disk Utility and see if the drive appears under “External.” If it does but isn’t mounted, click “Mount.”
- If the drive makes clicking sounds or is very hot, it may be failing—stop using it and consult a data recovery professional.
Alternative Backup Strategies
If you keep hitting this error, consider a different backup method:
- Cloud backup: Services like Backblaze or iCloud don’t depend on a local drive being present. You pay a subscription, but the location is always available.
- Network-attached storage (NAS): A NAS with RAID is more reliable than a single external drive, but it still needs network connectivity.
- Multiple destinations: Some software lets you set two backup locations. If one fails, the other still works.
- Disk imaging: Tools like Macrium Reflect (Windows) or Carbon Copy Cloner (macOS) create a full system image that you can store on any drive.
Frequently Asked Questions
Why does the error appear even when the drive is plugged in?
The drive may be connected but not mounted, or the drive letter changed. Check File Explorer/Disk Utility to confirm it’s visible. If it’s visible, re-select the backup location in your software.
Can I use a network drive as a fixed backup location?
Yes, but the network share must be available at the time of backup. If the computer hosting the share is off, the backup will fail. Map the drive and ensure it reconnects at sign-in.
Will I lose my existing backups if I re-select the location?
No. Re-selecting the same drive/folder will keep your existing backups. The software will just update its path reference. If you choose a different folder, you may start a new backup set.
How do I know if my external drive is failing?
Signs include unusual noises, slow file transfers, frequent disconnections, and errors when reading/writing. You can check the drive’s SMART status using tools like CrystalDiskInfo (Windows) or DriveDx (macOS).
Is it safe to ignore this error?
No. If the backup location isn’t found, your backups are not running, leaving you vulnerable to data loss. Fix the issue as soon as possible.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.