Everyday Items You Can Stop Buying With 3D Printing
You can stop buying a surprising range of everyday items once you own a 3D printer, from replacement drawer knobs and cable clips to custom kitchen organizers and phone stands. The key is knowing which things are cheaper and faster to print at home than to purchase at a store. This article explains what those items are, how the printing process works, what to consider before you start, and where 3D printing still doesn’t make sense.
What 3D Printing Actually Replaces
3D printing, also called fused deposition modeling (FDM) in most home machines, builds objects layer by layer from melted plastic filament. The most common materials are PLA (a biodegradable plastic from cornstarch) and PETG (a tougher, more heat-resistant plastic). With a basic printer costing less than a mid-range smartphone, you can produce functional plastic parts that would otherwise cost a few dollars each at a hardware store.
The items that make sense to print share three traits: they are small, they are simple in shape, and they are not subject to heavy wear or food safety requirements. Examples include:
- Drawer knobs and cabinet pulls
- Cable clips, cord organizers, and headphone stands
- Phone stands, tablet holders, and laptop risers
- Bathroom hooks, towel rings, and soap dishes
- Kitchen drawer dividers, spice jar lids, and funnel sets
- Garden plant labels, pot feet, and hose adapters
- Custom-sized spacers, shims, and washers
- Game piece replacements, dice trays, and miniature bases
What you stop buying depends on your household. A family with kids might print toy parts and board game pieces; a hobbyist might print camera lens caps and drone propellers; an office worker might print cable management and desk accessories. The common thread is that these are items where the retail price is mostly markup on a simple plastic shape.
How to Choose What to Print
Not every plastic item is a good candidate. Before you hit print, ask three questions:
- Is the part under stress? Hinges, clips that flex, and load-bearing brackets will wear out quickly in PLA. Use PETG or ABS for those, or buy the metal version.
- Does it touch food or skin? PLA is not food-safe because printed layers trap bacteria. For utensils or cutting boards, buy commercial items or use food-safe coatings.
- Is the print time worth it? A 10-centimeter cube takes about 2 hours. If the store price is $1 and your time is worth $20/hour, printing is not a saving.
A good rule of thumb: if the item is a simple, non-structural replacement that you can model or download in under 10 minutes and print in under 3 hours, it’s worth doing. If it’s a complex mechanism or a safety-critical part, buy it.
Where to Find Models and How to Start
You don’t need to design anything to start saving money. Online repositories host millions of free, ready-to-print models. Popular sites include Thingiverse, Printables, and MyMiniFactory. Search for the item you want, download the STL file, slice it with free software like Cura or PrusaSlicer, and send it to your printer.
For custom items, free CAD software like Tinkercad (for beginners) or Fusion 360 (for advanced users) lets you design your own. This is where 3D printing really shines: you can measure a broken part and recreate it exactly, rather than searching for a replacement that may no longer be sold.
When you start, use PLA. It prints easily, doesn’t warp, and is cheap. Set your nozzle temperature to around 200°C and bed temperature to 60°C. Print a calibration cube first to check your settings, then move to useful items.
Costs: Filament vs. Store Prices
A standard 1-kilogram spool of PLA costs about $20–$25 and prints roughly 100–150 small parts (like knobs or clips) or 20–30 medium parts (like phone stands). That means a single drawer knob costs about 15 cents in material, versus $3–$5 at a store. A cable clip costs about 2 cents versus 50 cents retail.
However, the printer itself is a fixed cost. A decent entry-level FDM printer runs $200–$400. If you print 50 items in the first year, each item carries $4–$8 of printer cost, which still beats retail for many items but not all. The break-even point comes when you print more than a few dozen parts or when you replace a part that is no longer sold.
Electricity adds a small amount—about 0.1–0.2 kWh per hour of printing, which at typical rates is 1–3 cents per hour. A 3-hour print costs less than 10 cents in power.
Common Problems and How to Avoid Them
New users often run into the same issues. Here are the most frequent ones and their fixes:
- Warping – corners lift off the bed. Use a heated bed, apply glue stick or painter’s tape, and keep the room draft-free.
- Stringing – thin plastic threads between parts. Lower the nozzle temperature by 5–10°C and increase retraction speed.
- Layer shifting – the print looks like stairs. Tighten the belts and make sure the printer is on a stable surface.
- Poor adhesion – the first layer doesn’t stick. Level the bed, clean it with isopropyl alcohol, and slow down the first layer speed.
- Clogged nozzle – filament stops coming out. Heat the nozzle to 230°C and push a cleaning filament through, or use a needle.
Most problems are solvable with calibration. Print a temperature tower and a retraction test once and you’ll avoid 80% of issues.
What You Should Still Buy, Not Print
3D printing isn’t a replacement for everything. Avoid printing these:
- Food-contact items – printed layers harbor bacteria; use commercial silicone or glass.
- Electrical components – plugs, sockets, and anything that carries mains voltage should be certified, not printed.
- High-wear parts – gears that spin at high speed, bearings, and hinges will wear out quickly; buy metal or nylon.
- Large items – a 30-centimeter vase takes 10+ hours and uses more filament than a store-bought one costs.
- Items requiring flexibility – TPU (flexible filament) is possible but tricky; a rubber gasket from the store is cheaper and more reliable.
Also, don’t print items that must meet safety standards, like child car seat parts or climbing gear. The strength and layer adhesion of home prints are not consistent enough for life-critical use.
Frequently Asked Questions
Is 3D printing actually cheaper than buying?
For small, simple plastic items, yes—material cost is often 10–20% of retail. But you must factor in the printer’s cost, your time, and failed prints. If you print more than 30–50 items a year, you’ll likely save money overall.
What filament should I use for everyday items?
PLA is best for most indoor, non-structural items like organizers, knobs, and stands. PETG is better for items that see heat or mild stress, like car phone mounts or outdoor planters. ABS is for high-heat parts but emits fumes and is harder to print.
Do I need to know CAD to start printing?
No. You can download thousands of free models and print them immediately. For custom parts, start with Tinkercad, which is browser-based and takes minutes to learn. More advanced software like Fusion 360 is free for hobbyists but has a steeper learning curve.
How long does it take to print a typical item?
A small item like a cable clip takes 15–30 minutes. A phone stand takes 2–4 hours. A large vase or lithophane can take 8–12 hours. Print time depends on size, layer height, and infill percentage.
Is 3D printing safe for kids?
Yes, with supervision. The nozzle and bed are hot (200°C+), so young children should not touch the printer while it’s running. PLA is non-toxic, but it’s best to print in a well-ventilated area. Printed toys should not be given to children under 3 due to choking hazards.
Can I print replacement parts for appliances?
Often yes, if you can find or model the part. Many people print knobs, buttons, and brackets for appliances. However, avoid parts that are under mechanical load or that come into contact with heat or water without checking the material specs.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.