Device Attached to the System Is Not Functioning: Fixes
When Windows reports “Device attached to the system is not functioning,” it means the operating system has detected a connected device but cannot communicate with it properly, often due to a driver, power, or hardware conflict. The fix usually involves reinstalling the device driver, checking the physical connection, or updating USB controllers. Below is a step-by-step guide to resolve this error on current Windows versions (10 and 11), along with background on why it happens and how to prevent it.
What This Error Means
The message appears when a device—such as a printer, external hard drive, USB hub, or webcam—fails the Windows Plug and Play handshake. The system sees that something is plugged in but cannot load a working driver or establish a stable data link. Common triggers include:
- Outdated, corrupted, or incompatible drivers
- Faulty USB ports or cables
- Power management settings that suspend the device
- Conflicts with other devices or ports
- Hardware failure (less common but possible)
The error can appear in the notification area, in Device Manager under the device’s properties, or as a pop-up when you plug something in.
Quick Fixes to Try First
Before diving into driver reinstallation, eliminate the simplest causes. These steps take less than a minute and often solve the problem:
- Unplug the device, wait 10 seconds, and plug it into a different USB port (preferably a port directly on the motherboard, not a hub).
- If it’s a laptop, ensure it’s not in battery saver mode that might cut power to USB ports.
- Restart the computer. This clears temporary glitches in the USB controller.
- Check the device’s own power switch or external power adapter—some external drives need their own power supply.
- Try the device on another computer. If it works there, the problem is with your system; if not, the device itself may be faulty.
If the error persists, move to the driver-based solutions below.
Reinstall the Device Driver
The most effective fix is to uninstall and reinstall the driver. This forces Windows to re-detect the hardware and load fresh driver files.
- Right-click the Start button and select Device Manager.
- Expand the category that matches your device (e.g., “Printers,” “Disk drives,” “Universal Serial Bus controllers,” “Imaging devices”).
- Right-click the problematic device (it may have a yellow exclamation mark) and select Uninstall device.
- In the confirmation dialog, check “Delete the driver software for this device” if the option appears. This ensures Windows removes the corrupted driver files.
- Click Uninstall and then disconnect the device.
- Restart your computer.
- Reconnect the device. Windows should automatically install the correct driver.
If Windows doesn’t automatically find a driver, go to the manufacturer’s website, download the latest driver for your exact model and Windows version, and install it manually.
Update USB Controllers and Chipset Drivers
Sometimes the issue isn’t the device itself but the USB controller it’s connected to. Updating the controller drivers can resolve communication errors.
- In Device Manager, expand Universal Serial Bus controllers.
- Right-click each entry that includes “Host Controller” or “Root Hub” and select Update driver.
- Choose Search automatically for drivers.
- Repeat for all entries in that section.
- Also check for chipset driver updates from your motherboard or computer manufacturer’s website, as these control the USB infrastructure.
If you see a device with a yellow exclamation mark in this section, that’s a strong clue the controller itself is failing. Try uninstalling it and restarting—Windows will reinstall it automatically.
Disable USB Power Saving
Windows can suspend USB devices to save power, but this sometimes causes the “not functioning” error when the device fails to wake up properly. Disabling this feature is a common permanent fix.
- Open Device Manager and expand Universal Serial Bus controllers.
- Double-click any “Root Hub” or “Host Controller” entry.
- Go to the Power Management tab.
- Uncheck “Allow the computer to turn off this device to save power.”
- Click OK and repeat for other Root Hubs.
This setting is safe to disable; the power savings are negligible for most users. If you have multiple hubs, do this for each one.
Check for Hardware Conflicts and Faulty Ports
If the error persists, the issue may be physical. Try these diagnostics:
- Test the device on all USB ports—both front and back of the case.
- Use a different cable (especially for printers and external drives).
- If using a USB hub, plug the device directly into the computer. Hubs can cause power or data issues.
- In Device Manager, click View > Show hidden devices. Look for greyed-out entries that might indicate a ghost device. Right-click and uninstall them, then restart.
- Check if the error occurs with a specific device or with any device. If it’s all devices, the USB controller may be failing—consider a PCIe USB expansion card.
Frequently Asked Questions
Why does this error happen after a Windows update?
Windows updates can replace or update drivers automatically. If the new driver isn’t compatible with your device, the communication fails. Reinstalling the driver (as above) or rolling back the driver in Device Manager (Properties > Driver tab > Roll Back Driver) usually resolves it.
Can a faulty USB port cause this error?
Yes. A damaged or dirty port can interrupt data transfer while still providing power. Try a different port and inspect the port for debris or bent pins. If the device works on another port, the original port is likely faulty.
What if the device works on another computer but not mine?
That points to a driver or software conflict on your system. Follow the driver reinstall steps, and also check for conflicting software like virtual USB drivers or outdated chipset drivers. In rare cases, a clean boot (disabling startup programs) can isolate the conflict.
Is this error a sign that my device is broken?
Not necessarily. The error is often software-related. However, if you’ve tried all the steps above and the device still fails on multiple computers, it may be a hardware failure. For storage devices, back up data immediately if you can access it at all.
How do I fix the error for a specific device like a printer or external drive?
The steps are the same: uninstall the device in Device Manager, delete the driver software, restart, and reconnect. For printers, also remove the printer from Settings > Devices > Printers & scanners before reinstalling. For external drives, ensure the drive has sufficient power (use a Y-cable or powered hub if needed).