Create Shortcut Without Shortcut Text?
- Average speed
- km/h
- Result
- Finish time
- 50 min
- You entered
- Distance
- 10 km
- You entered
Yes, you can create a shortcut without shortcut text (the label that appears under the icon) on most operating systems and launchers. The method depends on your device: on Windows, you can use a blank character in the name; on Android, you can use a launcher that supports icon-only shortcuts; on iOS, you can use the Shortcuts app with a blank name. This article explains the exact steps for each platform, what the limitations are, and why you might want to do it.
Formula
The calculator above is a pace calculator, not related to shortcuts, but it follows the same principle of giving you a clear output. For the shortcut question, the “formula” is: Shortcut without text = Icon + Blank Name. The blank name is achieved by inserting a special Unicode character that renders as invisible (or nearly invisible) in the file system and on the launcher. The most common is the zero-width space (U+200B) or the hair space (U+200A). Some systems also accept the non-breaking space (U+00A0) or a regular space, but those may show a visible gap.
Worked Example
Using the default values from the calculator: finish time = 50 minutes, distance = 10 km. The average pace is calculated as time divided by distance: 50 ÷ 10 = 5.0 min/km. The average speed is distance divided by time in hours: 10 ÷ (50/60) = 12.0 km/h. This shows how a simple division can give you useful metrics, just like how a blank name requires a simple substitution.
Why Remove Shortcut Text?
People remove shortcut text for a cleaner home screen, a more minimal aesthetic, or to avoid redundancy when the icon itself is self-explanatory. For example, a phone icon doesn’t need the word “Phone” under it. On a desktop, a browser icon with a recognizable logo doesn’t need “Chrome” or “Firefox” below it. Removing text also gives more space for more icons, especially on small screens.
How to Do It on Windows
On Windows, you can rename a shortcut to an invisible character. Follow these steps:
- Right-click the shortcut and select Rename (or press F2).
- Delete the existing name.
- Hold down the Alt key and type 0160 on the numeric keypad (this is a non-breaking space). Release Alt.
- Press Enter. The shortcut should now have no visible text.
If Alt+0160 doesn’t work, you can copy a zero-width space from a website (like this: ) and paste it into the name field. Note that the shortcut might still show a tiny dot or a placeholder in some file managers, but on the desktop it usually appears blank.
How to Do It on macOS
On macOS, the Finder doesn’t allow a file name to be empty, but you can use a zero-width space as the name. Here’s how:
- Copy a zero-width space character (U+200B) from a web page or character viewer.
- Right-click the shortcut (alias) and select Get Info or press Cmd+I.
- In the “Name & Extension” field, delete the current name and paste the zero-width space.
- Press Enter. The name field may appear empty, but the system accepts it.
Alternatively, you can use the built-in Character Viewer (press Control+Cmd+Space) to search for “zero width space” and insert it. Some macOS versions may show a warning about the name being invalid; if so, try a different invisible character like the hair space (U+200A).
How to Do It on Android
Android launchers vary, but most stock launchers (like Pixel Launcher, Samsung One UI) do not allow empty app names. However, you can use a third-party launcher like Nova Launcher, Action Launcher, or Microsoft Launcher that supports hiding icon labels. Steps:
- Install a third-party launcher that supports label hiding.
- Long-press the app icon on the home screen.
- Select Edit or Settings (depending on launcher).
- Look for a “Label” or “Name” field and delete the text, or toggle off “Show label”.
- Save the change.
On stock Android without a third-party launcher, you can still rename the app to a zero-width space using the same copy-paste method, but the system may revert it after a restart. For a permanent solution, a custom launcher is recommended.
How to Do It on iOS (iPhone/iPad)
iOS does not allow you to rename apps on the home screen directly. However, you can create a Shortcut (using the Apple Shortcuts app) that opens the app, and then give that Shortcut a blank name. Here’s how:
- Open the Shortcuts app (pre-installed on iOS 13+).
- Tap the + to create a new shortcut.
- Add an action: Open App and choose the app you want.
- Tap the shortcut name (usually at the top) and delete it.
- Copy a zero-width space and paste it as the name.
- Tap Done.
- Add the shortcut to your home screen via the share sheet and choose “Add to Home Screen”.
The shortcut will appear as a blank tile (or with a custom icon if you set one). Note that the Shortcuts app may show a warning about an empty name, but it often accepts the zero-width space.
Common Problems and Solutions
- The name reverts to “New Folder” or “Untitled”: This happens if the invisible character is not recognized. Use a zero-width space (U+200B) instead of a regular space.
- The icon disappears entirely: This is rare, but if the name is too short, some systems might hide the icon. Make sure the icon itself is set correctly.
- The shortcut text shows as a small rectangle or dot: This indicates the font doesn’t support the invisible character. Try a different invisible character like U+200B, U+200A, or U+00A0.
- Cannot rename on Android without launcher: Use a third-party launcher or an app like “Nova Launcher” that gives you full control.
- On iOS, the Shortcut opens the Shortcuts app instead of the target app: Make sure you add the “Open App” action correctly and test the shortcut before adding to home screen.
Alternatives to Blank Text
If you don’t want to deal with invisible characters, consider these alternatives:
- Use a custom icon with no label: Some launchers allow you to set a transparent label or hide it entirely.
- Use a folder with a blank name: On iOS, you can create a folder and name it with a zero-width space, then place the app inside. The folder will appear as a blank square.
- Use a different launcher or theme: Many Android themes and launchers have a “minimal” mode that hides all labels by default.
- Use a widget: Instead of a shortcut, add a widget that shows only the icon (if the widget allows customization).
Frequently Asked Questions
Is it possible to have a shortcut with no name on Windows 11?
Yes, the Alt+0160 method works on Windows 11, but you might need to use the zero-width space character. Right-click the shortcut, rename, and paste the character. If it doesn’t work, try using the character map to copy a non-breaking space.
Will a blank shortcut name affect functionality?
No, the name is purely cosmetic. The shortcut still points to the same target file or app. However, some system dialogs (like “Open with”) might show a blank name, which can be confusing.
Can I use an empty string (just delete the name) on Android?
Most Android launchers will not allow an empty string. They will either revert to the default name or show an error. Using a zero-width space is the workaround, but it may not persist after a reboot on stock launchers.
Does this work on Linux desktop environments?
Yes, most Linux file managers (like Nautilus, Dolphin) allow renaming to a zero-width space. Right-click, rename, paste the character. Some may show a warning, but it usually accepts it.
Why does my shortcut show a tiny dot after renaming?
That dot is likely the cursor or a placeholder for an empty name. It’s normal and will disappear when you click elsewhere. If it persists, try using a different invisible character.
Can I remove the text from a shortcut on Chrome OS?
Chrome OS doesn’t allow renaming app icons on the shelf. However, you can use a PWA (Progressive Web App) shortcut and rename it with a zero-width space in the file manager, but the shelf may still show the app name. There’s no official way to hide labels on the shelf.
Related
Formula used
in t | Finish time | min | 50 | 0 in d | Distance | km | 10 | 0 out pace | Average pace | min/km | t / d | 2 out speed | Average speed | km/h | d / (t / 60) | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.