Can the FCC Ban Chinese Labs From Testing US Electronics?
- Average speed
- km/h
- Result
- Finish time
- 50 min
- You entered
- Distance
- 10 km
- You entered
Yes, the FCC can ban Chinese labs from testing US electronics, and it has already taken steps in that direction. In 2021, the FCC adopted rules that would revoke the authorization of certain Chinese telecommunications equipment companies, and in 2024 it proposed a rule to prevent entities owned or controlled by China from participating in its equipment authorization program, which includes testing labs. This article explains how the FCC’s authority works, what a ban would mean for manufacturers and consumers, and what the current status is.
How the FCC’s Equipment Authorization Program Works
The Federal Communications Commission (FCC) regulates radio frequency (RF) devices sold in the United States under Part 15 of its rules. Before a device can be marketed or imported, it must be authorized—either through a Supplier’s Declaration of Conformity (SDoC) or a Certification. Certification requires testing by an accredited lab, and the test report is submitted to the FCC (or a Telecommunications Certification Body, TCB) for review.
Labs are not directly licensed by the FCC. Instead, they are accredited by private organizations (like A2LA or NVLAP) that are recognized by the FCC. The FCC maintains a list of approved test labs, and it can remove a lab from that list if it finds problems. The FCC’s authority to ban a lab comes from its general power to regulate devices that could cause harmful interference.
The 2024 Proposed Rule on Covered Entities
In March 2024, the FCC adopted a Notice of Proposed Rulemaking (NPRM) that would prohibit equipment authorization for devices that use components or software from certain Chinese companies (like Huawei and ZTE). The proposed rule also targets testing labs: it would not accept test results from labs that are owned or controlled by those same “covered entities.” The FCC’s goal is to address national security risks from devices that could be used for espionage or disruption.
If finalized, the rule would effectively bar Chinese-owned labs from testing US electronics for FCC certification. However, the rule is not yet in effect—it is still in the comment and review phase. The FCC has not published a final order, so as of now, Chinese labs can still test devices, unless they are already on a denial list.
What Would a Ban Actually Change?
If the FCC finalizes the ban, it would mean that any lab with Chinese ownership or control could not be used for FCC certification testing. That would affect:
- US manufacturers who currently use labs in China for cost or speed reasons.
- Chinese manufacturers who export to the US and rely on local testing.
- Global labs with Chinese parent companies, even if the lab itself is in the US or another country.
The ban would not stop the import of all Chinese-made electronics—it would only affect the testing process. Manufacturers would need to find an FCC-accepted lab outside the banned categories. That could increase costs and testing time, especially for small companies.
Common Misconceptions About the Ban
One misconception is that the FCC is banning all Chinese labs immediately. That is not true—the proposal is not final. Another misconception is that the ban would apply to all Chinese companies. The FCC’s proposal targets specific “covered entities” (like Huawei, ZTE, and their affiliates), not every lab in China. Also, the ban would not apply to testing for other countries’ regulations, only FCC authorization.
People also often think the FCC tests devices itself. It does not. The FCC relies on accredited labs, so the ban is about which labs’ results it will accept.
How to Choose a Testing Lab (If You’re a Manufacturer)
If you are a manufacturer of RF devices, and you want to avoid future disruptions, consider these factors:
- Check the FCC’s current list of accepted labs (the “Telecommunication Certification Body” and “Test Firm” lists).
- Review the lab’s ownership structure—if it has Chinese state or corporate ties, it may be affected by future rules.
- Ask if the lab is accredited by a recognized body (like A2LA or NVLAP) and if it has experience with FCC Part 15 testing.
- Consider using a lab in the US, Canada, or another trusted country to avoid future regulatory changes.
Keep in mind that the FCC’s rules can change, so staying informed is key.
Potential Costs and Delays
Switching labs can be expensive. A typical FCC certification test for a wireless device can cost anywhere from a few thousand to tens of thousands of dollars, depending on the complexity. If you move from a Chinese lab to a US lab, you might pay more for labor and overhead. Testing time can also increase—US labs may have longer queues, especially if many companies switch at once.
There is also the cost of re-testing. If your device was already tested by a banned lab, you might need to redo the tests with a new lab. That could delay product launches by weeks or months.
What About Other Countries’ Rules?
The FCC’s ban would only affect US market access. Other countries have their own testing requirements. For example, the EU uses the RED (Radio Equipment Directive) and accepts test reports from labs in many countries. India, Japan, and South Korea have their own approved lab lists. So a Chinese lab could still test for those markets, even if it cannot test for the FCC.
This means a global manufacturer might need to use multiple labs for different markets, increasing complexity and cost.
Frequently Asked Questions
Is the FCC ban already in effect?
No. The FCC proposed the rule in March 2024, but it is still in the rulemaking process. The FCC has not issued a final order, so the ban is not yet in effect. You can check the FCC’s website for the latest status.
Does the ban apply to all Chinese labs?
No. The proposal targets labs that are owned or controlled by specific “covered entities” (like Huawei, ZTE, and their affiliates). It does not ban all labs in China. However, the FCC could expand the list in the future.
Can a US company still use a Chinese lab for FCC testing?
Currently, yes, unless the lab is already on a denial list. But if the proposed rule is finalized, that would change for labs tied to covered entities. It is wise to monitor the FCC’s actions.
What happens if my product was tested by a banned lab?
If the FCC finalizes the ban, it may revoke or suspend equipment authorizations that relied on tests from banned labs. That could force you to re-test and re-certify your product with an acceptable lab. The FCC would likely provide a transition period, but it is not guaranteed.
Are there alternatives to FCC certification?
No, FCC authorization is mandatory for RF devices sold in the US. There is no alternative. But you can use a TCB (Telecommunications Certification Body) to review your test report, and the TCB can be located anywhere, as long as it is recognized by the FCC.
Related
Formula used
in t | Finish time | min | 50 | 0 in d | Distance | km | 10 | 0 out pace | Average pace | min/km | t / d | 2 out speed | Average speed | km/h | d / (t / 60) | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.