ThisCalculator

Home and garden

Corn Test Plot Calculator: How to Use One

Updated · Standard formula, shown below

Yield at 15.5% moisture 4,948.8 bu/ac
Wet yield
93.3 bu/ac
Result
Plot area
0.023 ac
Result
Plot length
100 ft
You entered

A corn test plot calculator works out yield (bushels per acre) from the weight of harvested corn and the area of the plot, and it can also convert that to a per-acre moisture-adjusted figure. You enter the plot length and width (or total area), the total weight of harvested grain, and the moisture percentage; the calculator returns the yield at a standard 15.5% moisture, which is the number used for comparing hybrids and management practices. This article explains the formula, how to use the calculator, and the common mistakes that make test plot numbers misleading.

Formula

The core formula for corn yield from a test plot is:

Yield (bu/ac) = [grain weight (lb) × (100 – moisture%) / 84.5] / [plot area (ac)]

Here is what each variable means:

  • Grain weight (lb): the total weight of shelled corn harvested from the plot, in pounds.
  • Moisture (%): the moisture content of the harvested grain, measured with a moisture meter.
  • 84.5: the dry matter weight (in pounds) of one bushel of corn at 15.5% moisture. A standard bushel is 56 lb at 15.5% moisture; 56 × 0.845 = 47.32 lb of dry matter, but the convention uses 84.5 as the wet-basis factor because 56 lb / 0.845 = 66.27, not 84.5. Actually, the standard formula for adjusting to 15.5% moisture is: adjusted weight = wet weight × (100 – wet%) / (100 – 15.5) = wet weight × (100 – wet%) / 84.5. That gives the weight at 15.5% moisture, which you then divide by 56 lb/bu to get bushels.
  • Plot area (ac): the area of the harvested plot in acres. If you measure length and width in feet, divide by 43,560 to get acres.

For a plot measured in feet, the full formula becomes:

Yield = [wt × (100 – m) / 84.5] / [(length × width) / 43560]

Most test plot calculators also let you enter the plot dimensions directly, so you don’t have to compute the area yourself.

Worked Example

Using the default values from the calculator above:

  • Plot length = 100 ft
  • Plot width = 10 ft
  • Harvested grain weight = 120 lb
  • Moisture = 20%

Step 1: Calculate the plot area in acres.

Area = 100 × 10 = 1,000 sq ft. Divide by 43,560 = 0.02296 acres.

Step 2: Adjust the grain weight to 15.5% moisture.

Adjusted weight = 120 × (100 – 20) / 84.5 = 120 × 80 / 84.5 = 113.61 lb.

Step 3: Convert adjusted weight to bushels (56 lb/bu).

Bushels = 113.61 / 56 = 2.029 bu.

Step 4: Divide by the area to get yield per acre.

Yield = 2.029 / 0.02296 = 88.4 bu/ac.

The calculator rounds to one decimal place, giving 88.4 bu/ac. This is the number you would compare with other hybrids or treatments.

How to Use a Corn Test Plot Calculator

Using a test plot calculator is straightforward, but the quality of the result depends entirely on the accuracy of your measurements. Here is the typical process:

  1. Measure the plot: Use a tape measure or a calibrated wheel to get the exact length and width of the harvested area. For a single row, measure the row length and the row width (e.g., 30 inches = 2.5 ft).
  2. Harvest the grain: Combine the plot, collecting all the shelled corn. Weigh the total harvest using a scale that can handle the load. For small plots, a hanging scale or a grain cart scale works.
  3. Measure moisture: Take a representative grain sample and test it with a moisture meter. The meter should be calibrated for corn.
  4. Enter the numbers: Input the length, width, weight, and moisture into the calculator. The calculator will compute the yield at 15.5% moisture.
  5. Record the result: Write down the yield and the plot details. Always note the hybrid, planting date, and any treatments so you can compare fairly.

Common Mistakes and How to Avoid Them

Even with a good calculator, errors in measurement or entry can ruin the result. Here are the most common pitfalls:

  • Wrong moisture adjustment: The standard moisture for corn is 15.5%, not 15% or 14%. Using the wrong baseline changes the yield by about 1% per point of moisture. Always use 84.5 as the denominator.
  • Mixing units: If you measure the plot in feet but enter the area in acres, or if you weigh in kilograms instead of pounds, the result will be off by a factor of 2.47 (for kg to lb) or 43,560 (for sq ft to ac). Use the same unit system throughout.
  • Including non-grain material: The weight should be shelled corn only, not cobs, husks, or foreign material. If you weigh the whole ear, you must shell it and weigh the grain separately.
  • Incorrect plot area: A 10 ft x 100 ft plot is 1,000 sq ft, but if you accidentally use 10 ft x 1000 ft, the yield will be 10 times too low. Double-check your dimensions.
  • Not accounting for harvest loss: The calculator assumes you collected all the grain. If the combine leaves ears or kernels behind, the yield will be underestimated.

When to Use a Test Plot Calculator

Test plot calculators are used in several situations:

  • Comparing hybrids: Growers plant side-by-side strips of different hybrids and harvest them separately to see which yields better.
  • Evaluating treatments: Testing different seeding rates, fertilizer levels, or fungicide applications.
  • On-farm research: Farmers conducting their own trials to make management decisions.
  • Seed company demonstrations: Companies use test plots to show the performance of their products.

The calculator is most useful when you have a small, measured area and a scale. For whole-field yields, you would use the combine monitor or a grain cart scale, which gives you the total weight and moisture directly.

Limitations of the Formula

The test plot formula is a simple arithmetic adjustment; it does not account for several factors that affect real-world yield:

  • Harvest losses: The formula assumes you collected every kernel. In practice, some grain is lost at the header, through the combine, or on the ground.
  • Moisture meter accuracy: The moisture reading is only as good as the meter and the sample. A non-representative sample (e.g., from the edge of the plot) can skew the result.
  • Test weight: The formula uses a standard 56 lb/bu. If the grain has a different test weight (e.g., light, drought-stressed corn), the actual bushels will differ. The calculator does not correct for test weight.
  • Plot edge effects: Outer rows often have more sunlight and space, leading to higher yields. If you harvest only the middle rows, the result may not reflect the whole field.

For accurate comparisons, keep the plot size consistent and use the same harvest and measurement methods every time.

Frequently Asked Questions

What is the standard moisture for corn yield calculation?

The standard moisture is 15.5%. The formula adjusts the harvested weight to that moisture level using the factor 84.5 (which is 100 – 15.5). This allows fair comparison between corn harvested at different moisture contents.

How do I measure the plot area if I only harvested one row?

For a single row, measure the row length and the row width (the distance between rows, e.g., 30 inches = 2.5 ft). Multiply length × width to get the area in square feet, then divide by 43,560 to get acres. For example, a 100 ft row with 30-inch spacing is 100 × 2.5 = 250 sq ft = 0.00574 acres.

Can I use this calculator for ear corn instead of shelled corn?

No, the formula is for shelled grain. If you have ear corn, you must shell it and weigh the kernels only. The moisture should also be measured on the shelled grain, not the whole ear.

Why is my yield different from the combine monitor?

Combine monitors use a sensor that estimates flow rate, which can be affected by moisture, grain density, and calibration. A test plot calculation using an actual scale is usually more accurate for a small area. Differences can also come from harvest losses or the monitor not being calibrated for the specific hybrid.

How do I convert my plot yield to a whole-field estimate?

If your plot is representative of the field, you can multiply the per-acre yield by the total acres in the field. However, be cautious: if the plot was on better or worse soil, or had different management, the estimate will be off. For a whole-field number, use the total weight from the grain cart and the field acreage.

What if my moisture is above 25%?

The formula still works, but very high moisture corn may have more field loss and drying shrink. The calculator adjusts the weight to 15.5% moisture, but it does not account for drying cost or shrink. For very wet corn, you may want to use a shrink factor, but the test plot formula remains the standard for yield comparison.

Related

Formula used
in l | Plot length | ft | 100 | 0
in w | Plot width | ft | 10 | 0
in wt | Harvested grain weight | lb | 120 | 0
in m | Moisture | % | 20 | 0
out yield | Yield at 15.5% moisture | bu/ac | (wt * (100 - m) / 84.5) / (l * w / 43560) | 1
out wet_yield | Wet yield | bu/ac | wt / (l * w / 43560) / 56 | 1
out area | Plot area | ac | l * w / 43560 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.