Feet to Meters Conversion Table
- Feet
- 10 ft
- You entered
This calculator converts feet to meters instantly. Enter a length in feet, and you get the equivalent in meters, plus the reverse calculation if needed. The conversion uses the exact standard factor: 1 foot = 0.3048 meters.
Formula
The conversion formula is:
meters = feet × 0.3048
Where:
- feet is the length in feet (unit: ft)
- meters is the length in meters (unit: m)
- 0.3048 is the exact conversion factor (defined by international agreement in 1959)
To go the other way, divide meters by 0.3048 to get feet.
Worked Example
Using the default input of 10 feet:
- Write the formula: meters = feet × 0.3048
- Plug in 10 feet: meters = 10 × 0.3048
- Multiply: 10 × 0.3048 = 3.048
- Round to two decimals: 3.05 meters
So 10 feet equals 3.05 meters (rounded). The calculator shows 3.05 m for the default value.
Why 0.3048? A Short History
Before 1959, the foot was defined differently in various countries, causing confusion in engineering and trade. In that year, the United States, the United Kingdom, Canada, Australia, New Zealand, and South Africa signed the International Yard and Pound Agreement. They defined the international yard as exactly 0.9144 meters, which makes the foot exactly 0.3048 meters (since 1 yard = 3 feet). This single definition replaced older variants like the U.S. survey foot (which was slightly longer, about 0.3048006 meters). Today, the international foot is the standard for most purposes, though the U.S. survey foot is still used in some land surveying contexts.
How to Convert Feet to Meters Without a Calculator
For quick mental estimates, remember that 1 foot is roughly 0.3 meters. So to approximate, multiply the number of feet by 0.3. For example, 10 feet × 0.3 = 3 meters (close to the exact 3.048 m). For a more precise mental math trick, multiply feet by 3 and then divide by 10: 10 × 3 = 30, 30 ÷ 10 = 3. This works because 0.3 = 3/10. If you need better accuracy, use the exact factor 0.3048 or this calculator.
Common Conversions at a Glance
Here are some frequently used values (rounded to two decimals):
- 1 ft = 0.30 m
- 3 ft = 0.91 m (almost 1 meter)
- 5 ft = 1.52 m
- 6 ft = 1.83 m (typical door height)
- 10 ft = 3.05 m
- 100 ft = 30.48 m
- 1000 ft = 304.80 m
Notice that 3 feet is very close to 1 meter, which is a handy reference: a yardstick is almost a meter stick.
Real-World Uses for Feet-to-Meters Conversion
You might need this conversion in many everyday situations:
- Sports: American football fields are 100 yards (300 ft) long, which is about 91.44 meters. Track and field events use meters, so converting helps compare performances.
- Aviation: Altitudes are often given in feet (e.g., cruising altitude 35,000 ft), but many countries use meters for weather reports.
- Construction: Building plans in the U.S. use feet, but materials from metric countries may be labeled in meters.
- Personal height: People in the U.S. often state height in feet and inches; elsewhere it’s in centimeters or meters. For example, 5’10” is 70 inches, which is 5.833 ft, or about 1.78 m.
Common Mistakes and How to Avoid Them
The most frequent errors when converting feet to meters are:
- Using the wrong factor: Some people mistakenly use 0.3 (approximation) when they need exact values. For precise work, always use 0.3048.
- Forgetting to convert inches: If you have a measurement like 5’10”, you must convert the inches to feet first (10 inches ÷ 12 = 0.833 ft), then add to 5 ft to get 5.833 ft, then multiply by 0.3048.
- Mixing up the direction: Dividing by 0.3048 instead of multiplying will give you a much larger number (that’s feet from meters). Always check: a meter is slightly longer than a yard, so a number in meters is always smaller than the same length in feet.
- Rounding too early: If you round intermediate steps, your final answer may be off. Keep extra digits until the end.
Limitations of the Conversion
This conversion is exact for the international foot. However, if you are working with historical documents or U.S. land surveys, you might encounter the U.S. survey foot, which is 0.3048006 meters. The difference is tiny (about 2 parts per million), but for large distances (like state boundaries), it can add up. For almost all everyday and engineering uses, 0.3048 is correct. Also, remember that this calculator gives results rounded to two decimals by default; for high-precision work, you can change the decimal places in the output.
Frequently Asked Questions
How many meters is 6 feet?
6 feet × 0.3048 = 1.8288 meters, which rounds to 1.83 meters. This is a common height for doorways and people.
What is the difference between a foot and a meter?
A meter is the base unit of length in the metric system, defined as the distance light travels in 1/299,792,458 of a second. A foot is a unit in the imperial/US customary systems, now defined as exactly 0.3048 meters. One meter is about 3.28 feet.
How do I convert meters back to feet?
Divide the number of meters by 0.3048. For example, 2 meters ÷ 0.3048 = 6.56 feet. Or multiply meters by 3.28084.
Is 1 meter exactly 3 feet?
No, 1 meter is approximately 3.28 feet. It’s close to 3.28, not exactly 3. The exact value is 1 / 0.3048 = 3.280839895… feet.
Why do some countries use feet while others use meters?
Most countries adopted the metric system in the 19th and 20th centuries. The United States, Myanmar, and Liberia still use imperial units for many everyday measurements. This is a historical legacy; the metric system is the international standard for science and most commerce.
Related
Formula used
in ft | Feet | ft | 10 | 0 out m | Meters | m | ft * 0.3048 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.