Control Resonant Speaker and Subwoofer Locations
Control Resonant is an optional side mission in Control that asks you to locate and destroy five Resonance Speakers in the Sealed Threshold Hall. They are not ordinary audio collectibles: find each speaker in the mission area and shoot it until it breaks, then return to the mission’s objective area to finish the task.
Where the Resonant Speakers Are
The five targets are spread through the Sealed Threshold Hall, the large room associated with the mission. Use the following route as a practical checklist; the room’s altered perspective and suspended structures can make a target easy to miss while moving quickly.
- Near the mission’s starting area: Search the initial part of the hall and look around the nearby structures rather than following the open floor alone. The first speaker is close enough to be found before you explore the room’s farther sections.
- On a raised structure: Look upward as you enter the broader chamber. A speaker is positioned on an elevated platform or structure, so use Levitate if you have it, or scan from different angles to get a clear shot.
- Along the side of the hall: Check the outer edges of the room, including the areas beside the main route. A speaker can blend into the architecture and is less noticeable if you only look toward the center.
- Near the far end of the chamber: Continue through the hall and inspect the structures toward the distant end. Turn around and check behind you as well; the room’s unusual layout can obscure targets from one direction.
- Above or behind the main route: Before leaving the area, sweep the upper and rear-facing surfaces. The final speaker is easy to overlook if you assume every target is at floor level or directly along the path.
These directions are deliberately based on landmarks and viewing angles rather than a compass heading: Control does not provide a conventional map view that makes every speaker’s precise position obvious, and room orientation can feel disorienting. Move slowly, look up, and use the mission objective marker to keep track of the general area.
How to Destroy Each Speaker
The speakers are environmental targets, not enemies that need to be defeated with a special sequence. Aim at a speaker and fire your Service Weapon until it visibly breaks. If you have unlocked Launch, throwing an object at it can also be a useful way to attack a target that is awkward to reach with ordinary gunfire. The key is to confirm that the object has actually been destroyed before moving on.
- Use brief visual sweeps of the room: ground level, side structures, then overhead.
- Try a different angle if a shot appears blocked by a ledge or piece of architecture.
- Watch for the destruction animation or other clear feedback; a few hits may not be enough.
- After breaking a target, pause to see whether the objective count or mission message changes.
Levitate is particularly helpful for searching elevated surfaces, but it is not a reason to ignore the floor and side areas. If you do not yet have the ability, inspect the room from accessible platforms and use line of sight to shoot what you can reach. If a speaker seems inaccessible, continue exploring the hall for a route or viewpoint rather than assuming the mission is broken.
Starting the Mission and Tracking Progress
Control Resonant is a side mission, so it may not appear as part of the main story’s immediate objective. The task is associated with the Sealed Threshold Hall in the Maintenance sector. If you have not picked it up, explore the area and interact with the relevant mission prompt or object when you find it; then check the mission list to confirm that Control Resonant is active.
Once the mission is active, the objective gives you the broad destination, but it does not necessarily lead your aim directly onto every speaker. Treat the counter or objective update as your progress check. When the last target is destroyed, follow the updated objective or return to the indicated point to complete the mission. Do not leave the area merely because you have found what seems like the final speaker: make sure the game registers all five.
Why the Room Can Be Hard to Search
The Sealed Threshold Hall is designed to feel strange and visually disorienting. Its scale, vertical spaces, and architecture can make it difficult to tell what is above, behind, or across from your current position. Speakers are small compared with the room, and environmental details can hide their outlines.
A systematic search is more dependable than repeatedly circling the same path. Divide the room into zones and check each one once:
- Low: floor-level corners and spaces beside the route.
- Middle: walls, platforms, and structures around the main path.
- High: overhead ledges, suspended structures, and surfaces visible only from a different angle.
- Behind: turn around at major landmarks and inspect the approach you just used.
This method also helps distinguish a missed target from a target that has already been destroyed. A destroyed speaker should no longer be an intact object; if you cannot tell, revisit the area and look for any remaining speaker-like object rather than relying only on memory.
Common Problems and Fixes
The mission counter has not advanced: The shot may have missed, or the speaker may still be intact. Aim again and keep firing until you see it break, then check the objective status.
You cannot see the target from the floor: Search from a different side of the room or use Levitate to gain height. Objects and platforms can block a direct shot even when the speaker itself is nearby.
You think only four speakers are present: Recheck the upper structures and the far or rear sections of the hall. The most common search mistake is checking the main route while overlooking an elevated or off-angle target.
The side mission is missing: Confirm that you are in the Sealed Threshold Hall and inspect your mission list. If the mission has not been activated, look for its prompt or associated object in the area before trying to complete the speaker objective.
You destroyed all five but are not finished: Check the updated objective and return to the indicated location if required. Destroying the targets and completing the mission are separate steps in the objective flow.
Frequently Asked Questions
How many speakers are in Control Resonant?
There are five Resonance Speakers to find and destroy in the Sealed Threshold Hall.
Where is the Control Resonant mission?
It is associated with the Sealed Threshold Hall in the Maintenance sector. Check the area for the side-mission prompt and use your mission list to confirm it is active.
Do I need Levitate to reach every speaker?
Levitate makes searching elevated areas easier, but the important thing is to get a clear view and shot. If a target is out of reach, explore for another viewpoint or route through the room.
What weapon destroys Resonance Speakers?
Use the Service Weapon and keep firing until the speaker breaks. Launch can also help attack a target when throwing an object is more convenient.
Why does the mission still say a speaker is missing?
One may be hidden above, behind, or beside the main route, or a target may have taken more damage before breaking. Search the room methodically and verify each destruction.
Does destroying the speakers finish the mission automatically?
Not always. Follow the updated objective and return to its indicated point if the mission asks you to do so.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.