Cheapest ARMA 3 Server Hosting That’s Still Good
The calculator for this page is switched off while it is checked. The formula is below, and the worked example in the article shows how to use it by hand.
For October, the cheapest ARMA 3 server hosting that’s still good is generally a budget VPS from providers like OVH, Hetzner, or Contabo, costing around $10–$20/month, rather than a dedicated game-server provider. You get full control, enough CPU power for a 60-slot mission, and you avoid the per-slot fees that make “cheap” game hosts either expensive or laggy. This article explains why a VPS wins on price and performance, what specs to look for, and how to set it up without tearing your hair out.
Why ARMA 3 Hosting Is Expensive (and Where the Money Goes)
ARMA 3 is a single-threaded game server. It uses one CPU core heavily, and that core’s speed matters more than core count or RAM. Most budget game hosts advertise low prices but oversell their servers, so you end up sharing that critical core with other customers. When a mission with 50 AI units runs, your server stutters and players desync. The “cheap” price often buys you a slot on a crowded machine, not a usable experience.
The real costs for a host are: a fast CPU (high clock speed, not many cores), enough RAM for mods (ARMA 3 can use 8–16 GB with heavy modsets), and reliable network bandwidth. A VPS from a large cloud provider gives you dedicated CPU resources at a lower price than a gaming-specific host because they don’t add the “gaming” markup. For October, the sweet spot is a VPS with a modern 4-core CPU (like an AMD Ryzen or Intel i7) and 16 GB RAM.
What Specs Actually Matter for ARMA 3
- CPU clock speed – Aim for 4.0 GHz or higher. ARMA 3’s server is single-threaded, so a 4-core CPU at 4.5 GHz beats an 8-core at 3.0 GHz.
- RAM – 8 GB minimum for vanilla, 16 GB recommended for mods like ACE, CUP, or RHS. The server loads the entire mission and all mods into memory.
- Storage – SSD is mandatory. Loading a 10 GB modset from an HDD causes long startup and stutter when players join.
- Network – 1 Gbps uplink is standard on most VPS. Look for a provider with low ping to your player base (e.g., US East for US players).
- DDoS protection – ARMA 3 servers are often targeted. Some budget hosts offer basic protection, but a VPS may require you to add a service like OVH’s game DDoS filter (extra cost).
Don’t be fooled by “unlimited slots” – ARMA 3’s engine limits performance regardless of slot count. A 60-slot server with 50 AI units will lag on any hardware if the mission is heavy.
VPS vs. Game-Specific Hosts: The Real Comparison
Game-specific hosts (like Nitrado, GTXGaming, or Survival Servers) offer one-click installs and a web panel. They cost $15–$30/month for 20–30 slots. For the same price, a VPS from a cloud provider gives you 4 dedicated cores, 16 GB RAM, and a 1 Gbps connection – far more power. The trade-off is setup effort: you must install Linux, SteamCMD, and the ARMA 3 server files yourself. But if you can follow a tutorial, you save money and get better performance.
For October, the cheapest good VPS options are:
- OVH (US or EU) – Their VPS “Value” line starts around $10/month for 4 GB RAM, but you’ll want the $20 tier for 8 GB. They have good DDoS protection included.
- Hetzner (EU) – Their CX22 or CX32 instances offer 4 vCPU and 8 GB RAM for about €5–€10/month. Excellent price/performance, but no built-in DDoS protection (you can add it via a third-party proxy).
- Contabo – Often the absolute cheapest, with 4 vCPU and 16 GB RAM for around $6–$10/month. Their network can be slower, but for a small group (10–20 players) it’s fine.
Always check the provider’s fair-use policy. Some “unlimited” bandwidth plans throttle after a certain amount of traffic.
How to Set Up ARMA 3 Server on a VPS (Step-by-Step)
- Buy a VPS – Choose Ubuntu 22.04 LTS (or 24.04). Pick a location close to your players.
- SSH into the server – Use a terminal (Windows: PuTTY or PowerShell; Mac/Linux: built-in SSH).
- Update the system – Run
apt update && apt upgrade -y. - Install SteamCMD –
apt install steamcmd(or download from Valve’s site). - Create a dedicated user – Run
useradd -m armaand switch to that user. - Download the ARMA 3 server files – Use SteamCMD with the app ID 233780. Example command:
steamcmd +login anonymous +force_install_dir /home/arma/arma3 +app_update 233780 validate +quit. - Configure your server – Edit
server.cfgandbasic.cfgin theconfigfolder. Set your server name, password, and max players. - Start the server – Run the executable with parameters like
-config=server.cfg -port=2302 -mod=@mods. - Keep it running – Use a tool like
screenortmuxto detach the process, or set up a systemd service.
For mods, download them to the @modname folders and add them to the launch parameters. Many players use a launcher like Arma3Sync to automate this.
Common Mistakes That Ruin Budget Hosting
- Choosing a VPS with a slow CPU – A 2.0 GHz CPU will make your server unplayable. Always check the clock speed.
- Not enough RAM – ARMA 3 with mods can easily use 12 GB. If the server runs out of memory, it crashes or lags.
- Ignoring DDoS protection – A single attack can take your server offline. If your VPS doesn’t include protection, consider a proxy like TCPShield (free tier) or a paid service.
- Using the default ports – ARMA 3 uses UDP 2302-2305. Make sure your firewall allows these.
- Not optimizing the mission – Even the best hardware can’t fix a poorly optimized mission. Reduce AI count, disable dynamic simulation, and use headless clients if needed.
One misconception: “more slots = better.” ARMA 3’s engine has a 100-player limit, but most missions run well with 40-60. A VPS with 4 cores and 16 GB RAM can handle that if the mission is efficient.
Cost Breakdown: What You’ll Really Pay in October
Let’s compare a typical game host vs. a VPS for a 50-slot server:
- Game host (e.g., Nitrado) – $25/month for 50 slots, but CPU is shared and often throttled. You get a web panel and support.
- VPS (Hetzner CX32) – ~€6.50/month (about $7) for 4 vCPU, 8 GB RAM, 160 GB SSD. Add €1 for a backup. Total under $10.
- VPS (Contabo) – ~$6/month for 4 vCPU, 16 GB RAM, 200 GB SSD. Total under $10.
You’ll also need a domain (optional) and possibly a DDoS protection proxy (free tier exists). So your total cost is $6–$15/month, versus $25+ for a game host. The VPS gives you more RAM and a dedicated core, so you get better performance for less money.
One caveat: if you’re not comfortable with Linux command line, a game host might be worth the extra cost. But for a technically inclined person, the savings are significant.
Frequently Asked Questions
Is a VPS really cheaper than a game host? Yes, often by half. Game hosts charge a premium for convenience. A VPS from a cloud provider costs less for more resources, but you trade off ease of setup.
Can I run ARMA 3 on a $5 VPS? Technically yes, but only for a few players (like 10) and with no mods. The CPU and RAM will be too limited for a good experience. Spend at least $10–$15.
How many slots can I run on a 4-core VPS? With a 4-core CPU at 4 GHz and 16 GB RAM, you can run 50-60 slots on a well-optimized mission. If you use heavy mods or lots of AI, reduce to 30-40.
What about Windows vs. Linux? Linux is cheaper (no Windows license) and more stable. ARMA 3 server runs fine on Linux via SteamCMD. Use Linux unless you need a Windows-only plugin.
Do I need DDoS protection? If your server is public, yes. A cheap VPS without protection can be taken down easily. Use a free proxy like TCPShield (for TCP) or a game-specific proxy like ProxyPipe (paid).
Can I migrate my existing server to a VPS? Yes. Copy your server files and mods to the VPS, adjust paths, and start. You’ll need to reconfigure your launch parameters.
Related
Formula used
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.