Change Faceplate on Ring Doorbell? Easy Steps
Yes, you can change the faceplate on most Ring video doorbells, and it takes less than a minute with no tools. This guide covers which models allow faceplate swaps, how to remove and attach a new one safely, and what to do if the faceplate feels stuck.
Which Ring Doorbells Have Replaceable Faceplates
Ring offers interchangeable faceplates for several of its video doorbell models. The following models support faceplate changes:
- Ring Video Doorbell (1st and 2nd generation)
- Ring Video Doorbell 2
- Ring Video Doorbell 3 and 3 Plus
- Ring Video Doorbell 4
- Ring Video Doorbell Pro and Pro 2
- Ring Video Doorbell Elite
- Ring Video Doorbell Wired
Models like the Ring Video Doorbell Pro, Pro 2, and Elite have faceplates that cover the front and sides, while the standard models use a faceplate that wraps around the front and edges. The newer Ring Battery Doorbell Plus and Ring Battery Doorbell Pro also have replaceable faceplates, but they use a different attachment mechanism than older models.
If you own a Ring Peephole Cam or a Ring Doorbell Cam (the original 2014 model), those do not have user-replaceable faceplates. For the original Doorbell Cam, the faceplate is permanently attached and cannot be swapped.
How to Remove the Existing Faceplate
Removing the faceplate is straightforward, but you need to be gentle to avoid damaging the clips. Here are the steps:
- Power off the doorbell – If your doorbell is wired, turn off the circuit breaker that supplies power to the chime or doorbell. For battery-powered models, you can leave the battery in place, but powering off is safer if you plan to handle the internal components.
- Locate the release tab or screw – On most models, there is a small tab at the bottom of the faceplate. On the Pro and Pro 2, there is a small screw on the bottom edge that must be removed with a Torx T6 screwdriver (included in the box).
- Press the tab or remove the screw – For models with a tab, press it firmly with a fingernail or a flathead screwdriver. For screw-based models, unscrew the small screw and set it aside.
- Pull the faceplate away – Gently pull the faceplate from the bottom, then lift it off the device. It should come off with a slight click. Do not yank it; if it resists, check that you have released the tab or screw completely.
On the newer Battery Doorbell Plus and Pro, the faceplate is held by a magnetic connection. Simply grasp the bottom edge and pull it toward you; it will detach with a firm tug.
How to Attach the New Faceplate
Attaching a new faceplate is essentially the reverse of removal:
- Align the top of the faceplate – Position the faceplate so that the top edge fits over the top of the doorbell. The camera lens and microphone holes should line up with the openings on the faceplate.
- Snap the bottom into place – Press the bottom of the faceplate until you hear a click. For screw-based models, replace the screw and tighten it gently.
- Test the button – Press the doorbell button to ensure it moves freely and is not obstructed by the faceplate.
- Restore power – If you turned off the breaker, turn it back on. The doorbell should reconnect to Wi-Fi within a minute or two.
For magnetic models, simply bring the faceplate near the doorbell and it will snap into place. Make sure it is oriented correctly – the Ring logo should be right-side up.
Where to Buy Replacement Faceplates
Ring sells official replacement faceplates in a variety of colors, including satin nickel, venetian bronze, and black. You can purchase them from the Ring online store or from major retailers like Amazon, Best Buy, and Home Depot. Third-party faceplates are also available, but they may not fit perfectly or have the same quality. Always check that the faceplate is compatible with your specific doorbell model – a faceplate for the Video Doorbell 2 will not fit the Video Doorbell 3, for example.
Before buying, note your doorbell’s model number, which is printed on the back of the device or in the Ring app under Device Health. This ensures you get the correct faceplate.
Common Problems and Solutions
Sometimes the faceplate can be tricky to remove or reattach. Here are common issues and how to fix them:
- Faceplate stuck – If the faceplate won’t come off, it may be due to paint or debris. Gently pry it with a plastic spudger or a flathead screwdriver wrapped in tape. Do not use excessive force.
- Faceplate won’t snap back on – Check that the clips are not bent. If they are, you may need a replacement faceplate. Also ensure you are aligning the top first, then pressing the bottom.
- Screw is stripped – If the Torx screw is stripped, you can try a slightly larger Torx bit or use a small pair of pliers to turn it. If that fails, contact Ring support for a replacement screw.
- Faceplate is loose – A loose faceplate can cause rattling or allow water ingress. Make sure it is fully snapped in place. If it still feels loose, the clips may be worn – consider a new faceplate.
Safety and Precautions
When changing the faceplate, always prioritize safety:
- Turn off the circuit breaker if your doorbell is wired. This prevents any risk of electric shock while handling the device.
- Do not use metal tools to pry the faceplate off, as you could scratch the doorbell or short-circuit internal components.
- If you drop the faceplate or the doorbell, inspect for damage before reattaching. A cracked faceplate may not provide adequate weather protection.
- Make sure the rubber gasket (if present) is seated properly before reattaching the faceplate. This gasket keeps moisture out.
Frequently Asked Questions
Will changing the faceplate void my Ring warranty?
No, changing the faceplate does not void the warranty, as long as you do not damage the device in the process. Ring explicitly designs these faceplates to be user-replaceable. If you break a clip or damage the internal components, that damage may not be covered, but the simple act of swapping the faceplate is fine.
Can I paint my Ring doorbell faceplate?
Yes, you can paint the faceplate, but it’s important to use a paint that adheres to plastic and does not block the camera lens or button. Remove the faceplate, clean it, and apply a plastic primer followed by a spray paint designed for plastics. Avoid painting over the sensor openings. However, painting may void the warranty, so consider buying a colored faceplate instead.
Do I need to remove the faceplate to charge the battery?
No, on battery-powered models, the battery is accessed from the bottom or the side, not through the faceplate. On the Video Doorbell 2 and 3, the faceplate does not need to be removed to charge the battery. On the original Video Doorbell, the faceplate must be removed to access the battery – that model uses a removable battery pack behind the faceplate.
How do I know which faceplate fits my model?
Check the model number on the back of your doorbell or in the Ring app. The app shows the device model under Device Health. Then search for that model’s faceplate. Ring’s website lists compatible faceplates for each model, and third-party sellers usually state compatibility in the product description.
What if my faceplate is cracked or damaged?
If the faceplate is cracked, replace it as soon as possible. A cracked faceplate can allow water to enter the device, causing electrical damage. Order a replacement from Ring or an authorized retailer. While waiting, you can temporarily seal the crack with clear tape, but do not leave it that way for long.
Can I use a faceplate from a different Ring model?
No, faceplates are model-specific. The shape and clip positions vary between models. Forcing a faceplate from a different model can damage both the faceplate and the doorbell. Always use the correct faceplate for your exact model.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.