DeWalt FlexVolt Battery in a 20V Max Tool: Yes, Here’s How
Yes, you can use a DeWalt FlexVolt battery in a 20V Max tool. The battery will automatically operate at 20V when connected to a 20V Max tool, and it is fully compatible with all tools in the 20V Max lineup. This article explains exactly how that works, what to watch out for, and how to get the most from your batteries.
How FlexVolt Batteries Work
DeWalt’s FlexVolt system is a clever piece of engineering that lets one battery pack power tools across two different voltage platforms. The key is in the battery’s internal electronics and the physical connection between the battery and the tool.
- 20V Max mode: When you slide a FlexVolt battery onto a 20V Max tool, the battery detects the tool’s voltage requirement and reconfigures its internal cells to deliver 20V (nominal, 18V actual).
- 60V Max mode: When you connect the same battery to a 60V Max tool, it reconfigures to deliver 60V (nominal, 54V actual).
This switching is automatic and happens every time you attach the battery. You don’t need to press any buttons or flip any switches.
Compatibility: Which Batteries and Tools Work
Not all FlexVolt batteries are the same, and not all 20V Max tools accept them physically. Here’s the breakdown:
- FlexVolt batteries (DCB606, DCB609, DCB612, etc.) – These are the large, yellow-and-black packs. They fit all 20V Max tools that have the standard slide-on battery mount. That includes drills, impact drivers, circular saws, reciprocating saws, and most other cordless tools in the 20V Max line.
- FlexVolt Advantage batteries (DCB610, DCB614, etc.) – These are smaller packs that only output 20V. They are designed to work with both 20V Max and FlexVolt Advantage tools (which are 20V tools with extra power features). They do not work on 60V tools.
If you have a 20V Max tool that uses the standard slide-on battery (which is essentially all of them), a full-size FlexVolt battery will fit and work. The only exception is tools that use a different battery mount, like some older 18V NiCd tools, but those aren’t part of the 20V Max system anyway.
Why You’d Want to Use a FlexVolt Battery in a 20V Tool
There are several practical reasons to use a FlexVolt battery in a 20V Max tool:
- Longer runtime: FlexVolt batteries have higher amp-hour (Ah) ratings. For example, a DCB606 is 6.0Ah at 20V, while a standard 20V Max battery might be 2.0Ah or 4.0Ah. More amp-hours means more work per charge.
- More power: While the voltage stays at 20V, the higher capacity cells can deliver more current, which can translate to slightly more torque or speed in demanding applications. This is especially noticeable in tools like circular saws or grinders.
- One battery for multiple tools: If you own both 20V and 60V tools, a single FlexVolt battery can power both. That reduces the number of batteries you need to carry.
Common Concerns and Misconceptions
There are a few myths and worries that come up frequently:
- Will it damage my 20V tool? No. The battery only outputs 20V when connected to a 20V tool. The tool is designed to accept that voltage. There’s no risk of over-voltage.
- Will it damage the battery? No. The battery is designed to operate at either voltage. Using it in a 20V tool is a normal, supported use case.
- Is it heavier? Yes, FlexVolt batteries are physically larger and heavier than standard 20V batteries. On a compact drill, this can make the tool feel front-heavy and tiring over long periods. For a stationary tool like a table saw, it’s a non-issue.
- Does it charge slower? FlexVolt batteries charge in a FlexVolt charger (DCB118, DCB1104, etc.) at the same rate as standard batteries. If you use a standard 20V charger, it will charge, but slower. The charger automatically adjusts to the battery’s chemistry and capacity.
How to Choose Between FlexVolt and Standard 20V Batteries
When deciding which battery to use, consider the trade-offs:
- Runtime vs. weight: If you need maximum runtime and don’t mind the weight, go with FlexVolt. If you’re doing light work and want a lighter tool, stick with a standard 20V battery.
- Cost: FlexVolt batteries are more expensive than standard 20V batteries of similar capacity. If you only own 20V tools, a standard high-capacity battery (like a 6.0Ah or 8.0Ah 20V) might be a better value.
- Future-proofing: If you plan to buy 60V tools later, investing in FlexVolt batteries now makes sense.
Safety and Maintenance Tips
Batteries are safe when used correctly, but a few precautions apply:
- Always store batteries in a cool, dry place. Extreme heat or cold can damage cells and reduce lifespan.
- Don’t leave a battery on the charger indefinitely. Unplug it once fully charged if you won’t use it for a while.
- Inspect batteries for cracks, bulges, or leaks. If you see damage, stop using it and recycle it properly.
- Use the correct charger. FlexVolt batteries should be charged with a FlexVolt charger for optimal performance and safety.
Alternatives: What Else Can You Use?
If you don’t have FlexVolt batteries, there are other options for powering 20V Max tools:
- Standard 20V Max batteries: These come in capacities from 1.5Ah to 12Ah. They are lighter and cheaper, but don’t offer the dual-voltage capability.
- PowerStack batteries: These are 20V Max batteries that use pouch cells instead of cylindrical cells. They’re more compact and deliver more power, but they’re not compatible with 60V tools.
- USB adapters: Some third-party adapters let you run 20V tools from a USB-C power bank, but these are niche and not officially supported.
Frequently Asked Questions
Will a FlexVolt battery physically fit on a 20V Max tool?
Yes, all FlexVolt batteries use the same slide-on mount as 20V Max tools. They will fit and lock securely.
Can I use a 20V battery in a 60V tool?
No, a standard 20V battery will not fit or work in a 60V tool. The 60V tools require the higher voltage and have a different battery mount that only accepts FlexVolt batteries.
Does using a FlexVolt battery void the warranty on my 20V tool?
No, using a FlexVolt battery in a 20V tool is a supported configuration and does not void the tool’s warranty.
How do I know if my battery is a FlexVolt or a standard 20V?
FlexVolt batteries are typically yellow and black, with “FlexVolt” printed on the side. Standard 20V batteries are usually black with yellow accents and say “20V Max.” The model number also indicates: FlexVolt models start with DCB6 or DCB8, while standard 20V models start with DCB2 or DCB4.
Can I charge a FlexVolt battery with a 20V charger?
Yes, you can, but it will charge slower. For fastest charging, use a FlexVolt charger (like the DCB118). The charger will automatically adjust to the battery’s chemistry.
Will a FlexVolt battery make my 20V tool more powerful?
It can, but not dramatically. The voltage stays at 20V, so the motor’s maximum speed and torque are the same. However, the higher capacity cells can deliver more current, which may reduce voltage sag under heavy load, resulting in slightly more consistent power output.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.