Brother Printer Not Printing? Fixed
If your Brother printer is not printing, the fix is usually a simple reset of the print queue, checking the ink or toner levels, or ensuring the correct printer is selected as the default. This article walks you through the most common causes and step-by-step solutions to get your Brother printer working again.
Why Your Brother Printer Stops Printing
Brother printers are generally reliable, but they can stop printing for a variety of reasons. The most common causes include:
- Paper jams – even a small piece of stuck paper can halt all printing.
- Empty or low ink/toner – many Brother models refuse to print when a cartridge is empty or has reached its replacement threshold.
- Driver issues – outdated or corrupted drivers can cause the printer to appear offline or not respond.
- Connectivity problems – a loose USB cable, a dropped Wi-Fi connection, or a changed network password can interrupt communication.
- Print queue stuck – a jammed print job can block all subsequent jobs.
- Wrong printer selected – if you have multiple printers, a document may be sent to a different device.
Quick Fixes to Try First
Before diving into more complex troubleshooting, try these quick steps:
- Turn the printer off and on. Unplug it from the power outlet, wait 30 seconds, then plug it back in and turn it on. This clears many temporary glitches.
- Check the display panel. Look for error messages like “Paper Jam,” “No Paper,” or “Replace Toner.” Address any message shown.
- Ensure the printer is online. On Windows, go to Settings > Devices > Printers & scanners, select your Brother printer, and click Open Queue. If the printer shows as “Offline,” click Printer in the menu bar and uncheck “Use Printer Offline.”
- Print a test page. This helps determine if the issue is with the printer itself or with your computer/software.
Clear the Print Queue
A stuck print job is one of the most frequent reasons a Brother printer stops printing. The job may be corrupted or too large, blocking other jobs behind it.
- On Windows, press Windows + R, type
services.msc, and press Enter. - Find Print Spooler in the list. Right-click it and select Stop.
- Navigate to
C:\Windows\System32\spool\PRINTERSand delete all files in that folder. (You may need administrator permission.) - Go back to the Services window, right-click Print Spooler, and select Start.
On a Mac, open System Settings > Printers & Scanners, select your Brother printer, and click Print Queue. Then click the X next to any stuck job, or click Resume if the queue is paused.
Check Ink and Toner Levels
Brother printers often stop printing when a toner or ink cartridge is empty, even if the printout is faint or blank. Some models have a “Stop” or “Continue” button that lets you temporarily override the low-ink warning, but once the cartridge is truly empty, the printer will not print.
To check levels:
- On the printer’s control panel, look for a Menu or Ink/Toner button.
- Use the Brother Status Monitor on your computer (installed with the drivers).
- Print a test page – if it is blank or has white streaks, the cartridge may be empty or clogged.
If you recently replaced a cartridge and the printer still says it is empty, try cleaning the electrical contacts on the cartridge with a dry cloth and reseat it firmly.
Update or Reinstall the Printer Driver
Outdated or corrupted drivers are a common cause of printing problems, especially after a Windows or macOS update. Brother provides drivers for all current models on its official website.
- Go to the Brother support site and search for your exact model number.
- Download the latest full driver package for your operating system.
- Run the installer. It will usually remove the old driver and install the new one.
If the driver is already up to date, try uninstalling the printer completely:
- On Windows: Settings > Devices > Printers & scanners, select the printer, click Remove device. Then re-add it using Add a printer.
- On Mac: System Settings > Printers & Scanners, select the printer, click the minus sign, then add it again.
Fix Connectivity Issues (USB and Wi-Fi)
If your Brother printer is connected via USB, try a different USB port or cable. A loose connection can cause intermittent failures.
For Wi-Fi connected printers:
- Check that the printer is connected to the same network as your computer. Print a network configuration page from the printer’s menu to see its IP address and SSID.
- Reboot your router and printer.
- If the network changed (new router or password), you must update the printer’s Wi-Fi settings. Use the printer’s control panel to connect to the new network, or use Brother’s setup utility.
If the printer has a static IP, make sure it hasn’t changed. You can also try pinging the printer’s IP address from your computer to see if it responds.
Frequently Asked Questions
Why does my Brother printer say “Offline” even though it’s on?
This usually means the computer has lost communication with the printer. Check the USB cable or Wi-Fi connection, and make sure the printer is not in sleep mode. On Windows, go to the printer queue and uncheck “Use Printer Offline.” On a Mac, click “Resume” in the print queue.
How do I reset my Brother printer to factory defaults?
Most Brother printers have a reset option in the menu. Go to Settings > All Settings > Reset (or similar) and choose “Factory Reset.” This will clear network settings and custom configurations, so you will need to set up the printer again.
My Brother printer prints blank pages. What should I do?
Blank pages usually indicate an empty or clogged ink cartridge, or a problem with the toner drum. Run the printer’s cleaning cycle from the control panel or the Brother Status Monitor. If that doesn’t help, replace the cartridge or drum.
Why does my Brother printer keep saying “Paper Jam” when there is no paper stuck?
Sometimes a small piece of paper remains hidden inside the rollers. Open all access panels (front, back, and any tray) and gently remove any paper fragments. Also check the duplexer if your printer has one. If the error persists, restart the printer to reset the sensor.
Can I use generic or remanufactured toner cartridges in my Brother printer?
Yes, many Brother printers work with third-party cartridges, but the quality can vary. Using non-genuine cartridges may void your warranty, and some Brother models use a chip that can cause the printer to display an error or stop working. If you choose generic cartridges, buy from a reputable seller.
When to Contact Brother Support
If you have tried all the above steps and your Brother printer still will not print, there may be a hardware failure. Contact Brother’s official support or a qualified technician. Be ready to provide your printer’s model number and a description of the error message. If the printer is under warranty, you may be eligible for a repair or replacement.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.