Add Fingerprint Touch ID Mac: How to Set It Up
To add a fingerprint to Touch ID on a Mac, open System Settings (or System Preferences on older macOS), go to Touch ID & Password, click the plus sign next to “Fingerprints,” enter your Mac password, and then follow the on-screen prompts to scan your finger. This works on MacBook models with a Touch ID sensor (2016 or later) and on Mac desktops with a Magic Keyboard with Touch ID. The setup takes under two minutes, but there are a few important details about how many fingerprints you can store and how to make the scanner read your finger reliably.
Which Macs Support Touch ID
Touch ID is built into the power button on MacBook Pro and MacBook Air models introduced after 2016, and it is available on the Magic Keyboard with Touch ID that works with Apple silicon Mac desktops (M1 and later). Intel-based Macs from 2016 onward also have it, but the exact model year matters. To check your Mac, click the Apple menu, choose About This Mac, and look at the model name and year. If your MacBook has a physical Esc key and a Touch Bar, it supports Touch ID. If your MacBook has a notch, it also supports Touch ID. The Magic Keyboard with Touch ID requires macOS Big Sur 11.0.1 or later and a Mac with Apple silicon or a T2 security chip.
How to Add a Fingerprint (Step by Step)
- Open System Settings (macOS Ventura and later) or System Preferences (macOS Monterey and earlier).
- Click Touch ID & Password (on older macOS, it is called Touch ID).
- Click the + (plus) button next to the word “Fingerprints.”
- Enter your Mac password when prompted.
- Place your finger on the Touch ID sensor, lift it, and reposition it slightly each time the scanner asks. Keep your finger flat and cover the sensor fully.
- When the scan finishes, you can name the fingerprint (e.g., “Right Index”) to help you remember which finger it is.
You can add up to five fingerprints total on a Mac, and each fingerprint can be assigned to a different finger. If you want to use the same finger for both your right and left hand, you need to use two separate slots.
What You Can Use Touch ID For
Once a fingerprint is added, you can use it to unlock your Mac, authorize Apple Pay purchases, approve App Store and iTunes purchases, autofill passwords in Safari, and unlock locked notes. You can also use it to switch between user accounts if you have multiple accounts on the same Mac. In System Settings, you can toggle each use case on or off individually. For example, you might want Touch ID to unlock the Mac but require a password for Apple Pay.
Touch ID does not replace your password. It is a convenience layer. You will still need your password after restarting your Mac, after logging out, and if you have not used Touch ID for more than 48 hours. This is a security feature, not a bug.
How to Remove or Rename a Fingerprint
To remove a fingerprint, go to System Settings > Touch ID & Password, hover over the fingerprint you want to delete, and click the x that appears. You will need to enter your password to confirm. To rename a fingerprint, right-click (or Control-click) the fingerprint name and choose Rename. You might want to rename it to match the actual finger, especially if you have several stored.
Common Problems and Fixes
If Touch ID does not recognize your finger, try these steps in order:
- Clean the sensor and your finger. Dirt, oil, or moisture can interfere. Wipe the sensor with a soft, dry cloth.
- Reposition your finger. Touch ID works best when your finger covers the entire sensor, not just the tip.
- Add the same finger twice. If you have a spare slot, scan the same finger again but hold it at a slightly different angle. This improves recognition.
- Check if Touch ID is disabled. Go to System Settings > Touch ID & Password and make sure the toggle for “Unlocking your Mac” is on.
- Restart your Mac. A simple restart can clear temporary software glitches.
If Touch ID still fails, you may need to reset it by removing all fingerprints and adding them again. If the sensor itself is damaged, you will need service from Apple or an authorized repair provider.
Touch ID vs. Face ID on Mac
Macs do not have Face ID. Apple has not included Face ID on any Mac model as of this writing. The only biometric option on a Mac is Touch ID. Some iPads and iPhones have Face ID, but Macs rely on Touch ID or a password. If you are used to Face ID on your phone, Touch ID on your Mac will feel different: you must physically press or touch the sensor, but it works even in the dark and does not require you to be facing the screen.
Security and Privacy Considerations
Your fingerprint data is stored in the Secure Enclave, a dedicated security chip on your Mac. It is never uploaded to Apple or iCloud, and apps cannot access it. The system only stores a mathematical representation of your fingerprint, not an image. This means that even if someone stole your Mac, they would not be able to extract your fingerprint data from the hardware. Touch ID is also designed to require your password after 48 hours of inactivity, which prevents someone from using your finger while you sleep (though they could still press your finger to the sensor if you are unconscious). For high-security situations, you can disable Touch ID entirely and rely on your password.
Frequently Asked Questions
How many fingerprints can I add to a Mac?
You can add up to five fingerprints total. This includes all fingers and thumbs. If you want to use more than five fingers, you would need to remove one and add another, which is not practical. Most people use two or three.
Can I add the same finger twice?
Yes, you can. Adding the same finger twice can improve recognition accuracy, especially if you tend to place your finger at a slightly different angle each time. Just scan the same finger in a different position for the second slot.
Does Touch ID work with gloves?
No, Touch ID requires direct skin contact. It uses capacitive sensing, which means it reads the ridges of your finger through the skin’s electrical properties. Gloves, even thin ones, block the signal. Some gloves have conductive fingertips designed for touchscreens, but they generally do not work with Touch ID.
Why does my Mac ask for my password instead of Touch ID?
Your Mac will ask for your password after a restart, after logging out, or if you have not used Touch ID for more than 48 hours. It also asks if you have just added a new fingerprint or if the sensor has failed to recognize your finger five times in a row. This is a security feature to prevent unauthorized use.
Can I use Touch ID to log into third-party apps?
Yes, many third-party apps support Touch ID through the macOS authentication API. For example, password managers like 1Password and Dashlane can use Touch ID to unlock the app. However, the app must explicitly support it. You can check the app’s settings for a Touch ID option.
What if my Mac doesn’t have Touch ID?
If your Mac is older than 2016 or is a desktop without a Magic Keyboard with Touch ID, you cannot add Touch ID. You can use a third-party fingerprint reader that plugs into USB, but these do not integrate with macOS’s built-in Touch ID system. They work only with the software they come with, so they cannot unlock your Mac or authorize Apple Pay.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.